Force Monitors

Wireless Torque Measuring System features shunt calibration.
Force Monitors

Wireless Torque Measuring System features shunt calibration.

Comprising 3 subsystems, WISER 4000 can measure torque, acceleration, pressure, and temperature. Remote unit consists of data capture electronics connected to Micro-Measurements strain gages, transceiver, and battery. Base unit plugs into PC USB port and houses antenna, transceiver, and up to 4 analog outputs. Output is wirelessly transmitted via 2.45 GHz signals at up to 100 ft line of sight....

Read More »
TECAT to Demonstrate WISER 4000 Wireless Torque Measuring and Monitoring System in Automotive Applications at Sensors Expo & Conference 2016
Force Monitors

TECAT to Demonstrate WISER 4000 Wireless Torque Measuring and Monitoring System in Automotive Applications at Sensors Expo & Conference 2016

ANN ARBOR, Mich. - June 14, 2016 - TECAT Performance Systems today announced that it will be highlighting its new WISER 4000 wireless torque measuring and monitoring system at Sensors Expo Conference 2016, being held June 21-23 in San Jose, California. In booth 1225 at the McEnery Convention Center, TECAT will provide live demonstrations of the system in automotive applications, including...

Read More »
Printed Polymer Strain Gage utilizes paste technology.
Force Monitors

Printed Polymer Strain Gage utilizes paste technology.

Based on pressure-sensitive sensor paste printed onto- PCB, P-DMS Polymer Strain Gage is used for measuring pressure in industrial, medical, automotive, military, and consumer electronics applications. Direct printing on application control board eliminates failure points of wire failure and corrosion in addition to negating electrical sparking as key contacts come together. Requiring no...

Read More »
Strain Gage Monitors feature programmable design.
Force Monitors

Strain Gage Monitors feature programmable design.

Featuring 1/8 DIN size housings with each bezel sealed to IP64 rating, OM502T Series is programmable for mathematical functions, including peak and tare, as well as digital filters. Accuracy is 0.05 % of range and rate is up to 100 measurements/sec. Available with 0.56 in. tall red or green LED displays, instruments provide analog outputs of 0–2/5/10 V, ±10 V, 0–5 mA and 0/4–20 mA. Digital...

Read More »
Onset Now Offers NIST RH Calibration
Force Monitors

Onset Now Offers NIST RH Calibration

Access Your Data via Mobile Device using the HOBOmobile® App! CHESTERLAND, OH — CAS DataLoggers is pleased to announce that effective immediately, Onset now offers testing and certification of HOBO data logger and sensor RH (relative humidity) accuracy using standards traceable to the U.S. National Institute of Standards Technology (NIST). This includes Single-point (50% RH @ 25°C) or...

Read More »
Strain Gage Input Module offers 1,500 Vrms input-to-bus isolation.
Force Monitors

Strain Gage Input Module offers 1,500 Vrms input-to-bus isolation.

Able to interface to quarter, half, or full-bridge sensors using 4- or 6-wire connection, MAQ®20-BRDG1 provides 4 channels of strain gage input. Unit interfaces to transducers with- nominal resistance of 100 Ω to 1 kΩ; four 24-bit data converters provide measurement capability with accuracy to ±0.05%; and anti-alias filtering eliminates signal degradation from environmental noise. Signal...

Read More »
Force Monitors

Torque Telemetry System features digital output signal.

Utilizing strain gauge technology, TorqueTrak TPM2 provides torque and power monitoring for applications such as material handling equipment, marine, automotive, energy, and power generation. Unit features digital RS422 full duplex, serial interface with user selectable sample rates from 10–4,800 samples/sec. Signal resolution is 15 bits for 8 input ranges from 0–32 mV/V down to 0–0.25...

Read More »
Crimp Force Monitoring - The Recipe for Success
Force Monitors

Crimp Force Monitoring - The Recipe for Success

In my line of work, I have the privilege of visiting many wiring harness shops that produce wiring harnesses for many different industries. One of the common issues I've noticed when visiting shops that use crimp force monitors (CFMs) is that the CFMs are usually turned off, regardless of the brand, because engineers and operators are not using them properly. While I hope this does not apply to...

Read More »
Marposs Features in-Process Tool Monitoring System at Westec 2013
Force Monitors

Marposs Features in-Process Tool Monitoring System at Westec 2013

Auburn Hills, MI – Marposs Corp. will present its Artis CTM-V5 system with DDU-4 torque and feed force sensor for identifying tool breakage and worn tools at WESTEC 2013 in booth #1946. The DDU-4 sensor is suitable for monitoring drilling and threading (tapping or thread forming) processes, as well as forming processes such as stir friction welding, by means of axial force and torque...

Read More »
Wireless Grip Force Meter helps improve chuck performance.
Force Monitors

Wireless Grip Force Meter helps improve chuck performance.

By measuring holding force of clamped jaws and RPM, wireless digital grip force gauge helps improve and monitor performance of chucks. Turning-center force sensor is available in 72 mm version capable of measuring 2- and 3- jaw chucks or 125 mm version that can measure 2-, 3-, and 4 jaw chucks. Sensor can be used to measure chuck when it is static or dynamic, increasing opportunities for accurate...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics