Acromag Introduces DT Series Dual Transmitters for Use in Harsh Environments
Electrical Transmitters

Acromag Introduces DT Series Dual Transmitters for Use in Harsh Environments

The DT Series Dual Transmitters are offered with two independent signal conditioning channels in loop-powered 2-wire and externally-powered 4-wire versions. The devices accept inputs such as process current, DC voltage, thermouple, RTD, and resistance signal types. They output a proportional 0/4-20mA, 0-10V, or ±10V DC signal from several input ranges. The transmitters come with removable, front...

Read More »
New FCO432 Differential Pressure Transmitter is Equipped with Two Configurable Relays
Pressure Transmitters

New FCO432 Differential Pressure Transmitter is Equipped with Two Configurable Relays

The FCO432 Differential Pressure Transmitter is suitable for clean environment applications and is available in various voltage or current loop configurations. The device comes with optional OLED or LCD displays and two independent relays. The transmitter offers 2-wire mA or 4-wire voltage output. The unit’s output is scalable as linear to differential pressure or as a square-root function.

Read More »
Endress+Hauser Presents Liquiline CM82 Transmitter with Memosens Sensor Technology
Gas and Chemical Transmitters

Endress+Hauser Presents Liquiline CM82 Transmitter with Memosens Sensor Technology

The Liquiline CM82 Transmitter comes in 11 cm x 2 cm (L x W) housing and accepts pH, ORP, pH/ORP, conductivity, oxygen and chlorine sensor signals. The device can be connected directly to a control component (PLC). The unit provides accessibility via 4-20mA HART or Bluetooth from iOS or Android device. The transmitter’s Memosens technology offers reliable data transmission with pre-calibrated...

Read More »
OTT Hydromet Introduces New Sutron XLink 100/500 Logging Transmitters with Remote Capability
Transmitters

OTT Hydromet Introduces New Sutron XLink 100/500 Logging Transmitters with Remote Capability

The Sutron XLink 100/500 Logging Transmitters are designed for gathering and transmitting environmental data and features intuitive software. The units integrate environmental sensors, smart, digital, and analog and support measurement protocols and interfaces (SDI-12). The systems are suitable for hydrologist, meteorologist, researcher or scientist and are able to measure 32 environmental...

Read More »
New WSG Series Transmitters Use Unrestricted 2.4 GHz Technology
Transmitters

New WSG Series Transmitters Use Unrestricted 2.4 GHz Technology

The WSG Series Transmitters from Sensor Technology are offered in WSG-STD and WSG-STM models that are DIN rail mounted and bench or wall mountable respectively. The WSG-STD unit is operated with a supply power of 11-32 V whereas the WSG-STM features an internal rechargeable battery or powered from 11-32 V external supply. The transmitters allow manufacturer’s strain gauge to send readings to...

Read More »
New EE23 Series Transmitters are Offered with Corrosion Resistant Coating
Humidity Transmitters

New EE23 Series Transmitters are Offered with Corrosion Resistant Coating

The EE23 Series Humidity and Temperature Transmitters are available for wall or duct mount versions with a IP65 / NEMA 4 rated polycarbonate or metal enclosure. The units come in three part design that includes back cover with terminals for wiring, pluggable active part with electronics and probe and a front cover. They offer the measured data in two current or voltage outputs. The transmitter...

Read More »
Vaisala Presents HMD62 and TMD62 Transmitters with IP66/NEMA 4-Rated Metal Bodies
Humidity Transmitters

Vaisala Presents HMD62 and TMD62 Transmitters with IP66/NEMA 4-Rated Metal Bodies

The HUMICAP® HMD62 Transmitter is used for monitoring humidity and temperature whereas the TMD62 for temperature measurements. The HMD62 unit calculates dew point, wet bulb, enthalpy, absolute humidity, and mixing ratio and delivers measurement accuracy of up to ±1.5 % RH and ±0.1 °C (±0.18 °F). It is resistant to chemicals and dust and can be configured using via Insight PC software.

Read More »
Latest Signet 9950 Dual Channel Transmitter Now Supports Signet 2751 pH/ORP Smart Sensor Electronics
Flow Transmitters

Latest Signet 9950 Dual Channel Transmitter Now Supports Signet 2751 pH/ORP Smart Sensor Electronics

The Gen2 Signet 9950 Dual Channel Transmitter is now compatible with Single Channel Direct Conductivity and Dual 4 to 20 mA Current Loop output modules. The unit automatically measures pH glass impedance, detects broken glass and reads stored data in Signet DryLoc pH and ORP electrodes. It is capable of reading multiple measurements that reduces the number of transmitters needed. The transmitter...

Read More »
New AssetScan Transmitters Provide Remote Alert Notifications
Motion Transmitters

New AssetScan Transmitters Provide Remote Alert Notifications

ATEK Access Technologies adds AssetScan ASV (vibration) and ASM (multipurpose) transmitters to measure process variables. The ASV transmitter features dual inputs and can measure overall vibration, bearing faults and generates notification when alert levels are reached. The ASM transmitter is designed for monitoring two 4-20 mA loop powered instruments. The units enable user to continuously...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics