Level Transmitters

K-TEK LMT Series Level Transmitters feature two-wire common transmitter design.
Electrical Equipment & Systems

K-TEK LMT Series Level Transmitters feature two-wire common transmitter design.

Available in LMT100 insertion and LMT200 non-intrusive styles, K-TEK LMT Series Magnetostrictive Level Transmitters allow easy change of orientation without any modification in equipment. LMT100 series comes with 22.86m probe. LMT200 series are used with KM26 magnetic level gauge. Delivering 4-20mA HART output, both series designs can be used as interface or as total level measurement.

Read More »
Level Transmitters are equipped with large LCD display.
Electrical Equipment & Systems

Level Transmitters are equipped with large LCD display.

Available in 2290, 2291 models, Level Transmitters feature radar sensing technology. Featuring non-contact radar technolgy with PP or PTFE antennas, Type 2290 can resist most corrosive environments. Designed with stainless steel or FEP or PFA or PP coated rod for continuous level measuring of liquids, pulps or solids, Type 2291 delivers consistent measurement by eliminating interferences from low...

Read More »
Radar Level Transmitters feature LCD display.
Electrical Equipment & Systems

Radar Level Transmitters feature LCD display.

Available in 2290, 2291 models, Radar Level Transmitters use HART or analog communications. Featuring non contact radar technology, type 2290 transmitter is available with PP or PTFE antennas and blocks internal pipes, welding seams and heating elements. Eliminating interferences due to low dielectric liquids or heavy fumes, type 2291 transmitter is designed for continuous measuring of conductive...

Read More »
Electrical Equipment & Systems

Endress+Hauser Showcases Water & Wastewater Solutions at WEFTEC

The latest instrumentation from Endress+Hauser will be demonstrated in Booth 3745 at the WEFTEC show in New Orleans from September 26-28, 2016. Endress+Hauser will showcase its latest instrumentation offering for the water and wastewater (WWW) industry at the WEFTEC show in New Orleans from September 26-28, 2016. The instrumentation will be demonstrated at booth 3745. Highlights of the booth...

Read More »
Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components
Sponsored

Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components

For the past 60 years, the use of copper infiltration on ferrous metals in powder metallurgy has been a popular method for manufacturing high performance components. Recently, a new twist on an old idea has been developed in the form of a new wrought copper alloy wire. With excellent infiltration response as well as the ability to improve numerous physical and mechanical properties of ferrous materials, this new technology presents many advantages for PM processing and production. In this comprehensive white paper, you will explore all you need to know about this material, including an in-depth look at its chemical and physical properties. Using automotive components as examples, the white paper examines the benefits of this new form of copper infiltration compared to more traditional infiltration methods. Download now, and discover if this new technology is the solution for your high performance component application.

Read More »

Guided Wave Radar Level Sensor with Hazloc Approvals and Modbus RTU
Electrical Equipment & Systems

Guided Wave Radar Level Sensor with Hazloc Approvals and Modbus RTU

Lincoln, Nebraska - BinMaster's GWR-2000 guided microwave level transmitter provides continuous level measurement in vessels up to 100 feet tall with accuracy of ±0.08 inches (2mm). It utilizes time domain reflectometry (TDR) to continuously measure the distance, level, and volume of powders or solids in bins, tanks and silos. This sensor features hazardous location approvals, a very small...

Read More »
Submersible Level Transmitter features one-piece design.
Electrical Equipment & Systems

Submersible Level Transmitter features one-piece design.

Featuring monolithic design, Model 59Y Series measures hydrostatic pressure of compatible media. Transmitter is available with choice of PVC, PP, PVDF, or 316L stainless steel material, as well as in submersible ranges from 0-16 in. W.C. to 0-835 ft W.C. PUR cables are available as standard, with options for PVC, FEP and TPE types. Fully sealed to IP68 rating, transmitter provides accurate,...

Read More »
Accurate 79 GHz Radar increases liquid level measurement accuracy.
Communication Systems & Equipment

Accurate 79 GHz Radar increases liquid level measurement accuracy.

With 79 GHz transmission frequency, Micropilot NMR81 produces sharply focused microwave beam angle of 3° or 4° that ensures safe and reliable measurements without any interfering signals even in narrow tanks with baffles and down to bottom of tall tanks. Measuring ranges reach up to 70 m, and instrument measures up to 30 m with accuracy to ±0.5 mm in custody transfer applications. Product...

Read More »
Guided Wave Radar Level Transmitters offer 3 probe configurations.
Electrical Equipment & Systems

Guided Wave Radar Level Transmitters offer 3 probe configurations.

Offered in up to 9.8 ft rod and coaxial as well as up to 18.0 ft cable probe configurations, LVRD10 Series provides continuous level measurement with 4–20 mA signal output. Contact liquid level sensor is intended for low-corrosive chemical, waste, oil, or water storage applications in above grade metal or reinforced concrete tanks or below grade tanks of any material. Sensor is configured...

Read More »
Submersible Level Transmitter features 316 SS construction.
Electrical Equipment & Systems

Submersible Level Transmitter features 316 SS construction.

Providing trouble-free service within harsh environments, Model BC001 Birdcage® Series features 3 in. sensing diaphragm that eliminates process media clogging. Design also allows unit to read true level depth within foam environments. Protective stand-off baffle plate further eliminates inherent risks of effluent sensor damage, while dual sealed cable entry prevents leakage. Featuring integral...

Read More »
Submersible Level Transmitter monitors wastewater.
Electrical Equipment & Systems

Submersible Level Transmitter monitors wastewater.

Featuring corrosion-resistant design that is submersible to 1,100 ft, Model 311-M351 supports challenging wastewater lift station monitoring applications. Unit is available in standard ranges from 0–10 through 0–1,100 ft WC, with choice of 4–20 mA or 0–5 Vdc output. To eliminate process clogging, transmitter incorporates 3 in. diameter clog-resistant sensing diaphragm and...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect Multi-Pocket selectable quick change tool holder, its time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and were pleased to show you why.

Read More »

All Topics