Four New Honeywell Safety Products Win Prestigious iF Design Awards For Innovation, User Design
Sensors / Detectors / Transducers

Four New Honeywell Safety Products Win Prestigious iF Design Awards For Innovation, User Design

Portable and fixed gas detectors, respiratory mask selected from more than 5,500 entries from 59 countries by independent experts SMITHFIELD, R.I., March 22, 2017 - Honeywell (NYSE:HON) today announced that four of its safety products have won 2017 iF Design Awards in recognition of their outstanding innovation and user-focused design. An independent jury of 58 design experts selected Honeywell...

Read More »
KXTJ3 Accelerometer features built-in voltage regulator.
Accelerometers

KXTJ3 Accelerometer features built-in voltage regulator.

Used in pet monitors, smart tags, beacons and key fobs, KXTJ3 Accelerometer can operate with low 1.5uA at its lowest ODR of 0.781Hz. Offering g-ranges of 2g, 4g, 8g, or 16g and resolution modes up to 14g, unit comes in 2mm x 2mm x 0.9mm form factor. Featuring embedded motion wake-up engine with 3.9mg threshold, unit supports I2C protocol up to 3.4MHz.

Read More »
NR60 Series Rotary Shaft Encoders feature built-in Ethernet switch.
Rotary Encoders

NR60 Series Rotary Shaft Encoders feature built-in Ethernet switch.

Available in single and multi-turn versions, NR60 Series Rotary Shaft Encoders come with built-in EtherNet/IP and Modbus interface. Offering 16 bits (single turn resolution) and 14 bits (number of revolutions) measuring range, units are housed in 60mm diameter package in flange or servo mounting styles. Meeting IP67 ingress protection rating, encoders are used in single-turn and multi-turn...

Read More »
ECA 4410 Encoder Series features EnDat data interface.
Encoders

ECA 4410 Encoder Series features EnDat data interface.

Designed with centering collar on the inside diameter of the drum, ECA 4410 Angle Ring Encoder Series feature additional back-off threads for disassembly. Mechanically compatible with normal ECA 4000 line and ERA 4000 line of angle encoder feedback devices, unit can be used as single-encoder system in applications with control category SIL 2 and Category 3 PL performance level “d”.

Read More »
PEM010 Millimeter Wave Transmitter Module features WR-15 waveguide port.
Transmitters

PEM010 Millimeter Wave Transmitter Module features WR-15 waveguide port.

Operated in 57.0 to 64.8 GHz frequency spectrum, PEM010 Millimeter Wave Transmitter Module offers 38 dB gain, +12 dBm output P1dB and 34 dB image rejection up to 1.8 GHz modulation bandwidth. Providing -111 dBc/Hz offset phase noise at 10 MHz, transmitter uses two reference clocks for setting 540 MHz or 500 MHz channel spacing. Units are used in wireless gigabit Ethernet data communications and...

Read More »
2017 NAB Show Product Preview Digital Alert Systems Booth N5009
Players

2017 NAB Show Product Preview Digital Alert Systems Booth N5009

Panel Discussion: ATSC 3.0 Advanced Emergency Alerting Tuesday, April 25, 11 a.m., Meeting Room N256 Besides demonstrating a range of new and existing products at the 2017 NAB Show, Digital Alert Systems will have a voice in the discussion of ATSC 3.0 Advanced Emergency Alerting. Ed Czarnecki, the company's senior director of strategic development and global government affairs and a key...

Read More »
Cavity Pressure Sensor comes with flexible connector cables.
Sensors / Detectors / Transducers

Cavity Pressure Sensor comes with flexible connector cables.

Suitable for high cavitation molds with small, tightly packed ejector pins, Cavity Pressure Sensor is combined with eDART System for assisting molders in diagnosing processes. Designed with sensor head for matching with Piezoelectric 9211 6 mm button, units are available in 50 lb rating with ejector pins up to 2 mm diameter and 250 lb rating for pins up to 4.5 mm diameter. Sensors come in measure...

Read More »
HB Series PIR Occupancy Sensors meet IP65 standards.
Sensors / Detectors / Transducers

HB Series PIR Occupancy Sensors meet IP65 standards.

Available in HBP-111, HBP-112 and HBP-110 series models, HB Series PIR Occupancy Sensors provide automatic control of individual LED and fluorescent lighting fixtures in warehouses, distribution centers, parking garage indoor and low bay spaces. HBP-110 series sensors feature enclosure that withstands 5 ft-lb impact without cracking. HBP-112 series sensors offer simple, cost-effective code...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics