Encoders offer hollow hub for ease of installation.
Encoders

Encoders offer hollow hub for ease of installation.

Two models of incremental encoders with commutating abilities feature resolutions of 6000 lines/revolution, satisfying moderate to high-end accuracy requirements. They are available in 35 and 45 mm dia sizes, and are assembled with integral PC board. Models offer 2-channel quadrature output; index, which allows count resolution to 24,000 counts per revolution; and TTL compatible line driver...

Read More »
Gas Monitors are UL and CSA approved.
Gas / Chemical Monitors

Gas Monitors are UL and CSA approved.

Gas Baron 2 Series single gas monitors are available with interchangeable sensors for measuring Chlorine, Nitrogen Dioxide, Nitric Oxide, Sulfur Dioxide, Hydrogen Sulfide, and Carbon Monoxide. Other versions for Oxygen, Hydrogen Cyanide, Ammonia, Chlorine Dioxide, Phosphine and Combustibles as %LEL are also available. Monitors include digital display, backlight, user adjustable audible and visual...

Read More »
K and RTD Thermometers measure in °F and °C.
Thermometers

K and RTD Thermometers measure in °F and °C.

Models CA861, CA863 and CA865 are portable meters designed to use either external K-type thermocouple or RTD Pt385/100 ohm as temperature sensor. Units include MAX and HOLD functions, high-resolution 0.1° setting, and 3-1/2 digital LCD display with backlight. Models CA861 and CA863 are supplied with K-type thermocouples and CA865 is supplied with one RTD probe. All models come with...

Read More »
Liquid Level Meter provides specific gravity compensation.
Sensors / Detectors / Transducers

Liquid Level Meter provides specific gravity compensation.

Microprocessor-based Model LE100 has built-in back pressure sensor capable of measuring levels up to 1000mm. Front panel mylar display features 2 digital readings for actual level and set value, 8 output LED indication, and 4 push buttons for setting unit. Built-in linearizer compensates for variations in tank shapes. LE100 provides sampling time of 0.2 sec with +/- 0.3% repeatability. It can...

Read More »
Sensors / Detectors / Transducers

Light Scattering Detector is for micro and capillary HPLC.

PL-ELS 1000Â-µ microbore evaporative light scattering detector provides baseline stability for HPLC separations requiring gradient elution. Detector operates with eluent flow rates from 1 to 500 µl/min, detects all non-volatile solutes, and does not require UV chromophore. It can be used as standalone detector for separations using capillaries down to 300 µm ID, or can be...

Read More »
Absolute Encoder operates at speeds to 6,000 rpm.
Encoders

Absolute Encoder operates at speeds to 6,000 rpm.

Single turn Absolute Series Accu-Coder Model 926 is available in variety of bore sizes in both blind hollow and thru-bore versions. It has thin, 1.38 in. profile, flexible mounting system, industrial grade integral bearings and digital signal that makes it suited for applications where presence of electrical noise is high.

Read More »
Compressor Monitors check pressure and position.
Motion Monitors

Compressor Monitors check pressure and position.

Model 3500/72M Rod Position Monitor uses correlative measurements to confirm if excessive movement is due to rider band wear or other problems such as crosshead looseness or rod runout. Model 3500/77M Cylinder Pressure Monitor uses pressure transducers located on each chamber of cylinder, collecting pressure data and crankshaft position to provide information on condition of valves, piston rings,...

Read More »
Dust Monitor provides immediate results.
Particulate Monitors

Dust Monitor provides immediate results.

OSHA- and EPA-compliant Model HD-1003 Real-Time Personal Dust Monitor, with lapel-mounted optical sensor, provides true breathing-zone measurements and graph reporting via included software. HD-1003 offers immediate determination and data storage of airborne particulate concentrations in milligrams per cubic meter. Sensor accepts standard 37mm filter gravimetric cassette, allowing user to collect...

Read More »
Defect Detection System runs reliably.
Sensors / Detectors / Transducers

Defect Detection System runs reliably.

TM-DSS500kHz defect detection, measurement, and wire surface roughness analysis system detects bumps, neckdowns, splits, frays, contamination and inclusions on wire, cable, glass rods, catheter tube, fiber, and thread. It has 100 Â-µm optical comparator slit detector, real time DSP defect recognition algorithms, and fail-safe detection algorithms that monitor sensor and system health and...

Read More »
Meters

Isotropic Analyzers check magnetic and electrical fields.

Model EFA-200 and EFA-300 analyze low-frequency magnetic and electrical fields to determine safety or potential for harm from high-voltage utility lines and industrial equipment such as resistance welders. Analyzers use Shaped Time Domain (STD) technology to measure in low frequency range of 5 Hz to 32 kHz. They calculate and display field strength levels as percent of industry or government...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers