Sensors / Detectors / Transducers

Pressure Sensors meet 3A, FDA and EHEDG specs.

PL2, PM2, PF2 and P12 sanitary sensors monitor pressure in food, beverage, dairy, and pharmaceutical applications. Sensor housings are 316 stainless steel and accept variety of sanitary fittings, including 1 1/2 and 2 in. Tri-Clamp fittings. All are 2-wire transmitters with scaleable 4-20mA or 0-l0V analog output that is accurate to 0.6% of range with repeatability of 0.1 %. Models are available...

Read More »
Transmitters

Transmission System transmits 4 independent audio channels.

Pure Digital Fiberlink® 4040 Series fiber optic transmission system offers all digital transmission of 4 audio channels over single-mode or multi-mode fiber. Channels may be used to transmit 2 sets of stereo signals, or to support 4-channel surround sound. Audio channels may be configured for either balanced or unbalanced input and output, with or without input termination. System operates...

Read More »
Electronic Module cleans up encoder signals.
Electronics

Electronic Module cleans up encoder signals.

Anti-Dither Module can be placed between encoder and receiving electronics. DIN rail mountable device compares quadrature outputs from encoder, removes errors caused by mechanical vibration, and gives true picture of system output. Applications include web processes, conveyors, in-line inspection stations, and heavy equipment.

Read More »
pH/ORP Sensors use differential electrode technology.
Sensors / Detectors / Transducers

pH/ORP Sensors use differential electrode technology.

pHD(TM) electrode sensors use 3 measuring electrodes. Process and reference electrodes measure pH differentially, with respect to third ground electrode, reducing reference junction fouling and minimizing ground loops. Preamplifier boosts electrodes' mV signals for transmission up to 3,000 ft. PEEK(R) and Ryton(R) bodies provide chemical resistance in aggressive process solutions. Convertible,...

Read More »
Vibration Monitor offers alarm and shutdown outputs.
Motion Monitors

Vibration Monitor offers alarm and shutdown outputs.

Model 8812 K-Guard vibration level monitor and switch allows for external 100 mV/g accelerometer to be remotely located from signal processing module. Housed in NEMA-4X (IP65) enclosure, it provides field set point range of 0.08 to 2 in./sec, velocity peak range of 4 in./sec, and frequency range of 10 to 1000 Hz. Partnered with a piezoelectronic sensor, 8812 operates on 18 to 30 Vdc supply...

Read More »
Position Transducer measures up to 4 in. of travel.
Sensors / Detectors / Transducers

Position Transducer measures up to 4 in. of travel.

Model 174-0321T subminiature position transducer uses stainless steel cable wound around stainless steel drum. Bearing-mounted drum is mated to potentiometric element that translates linear position information to electrical signal. Transducer monitors cable acceleration in excess of 50 g's, and features 5K ohm co-molded conductive plastic potentiometric elements. It has operating temperature of...

Read More »
Rotary Encoders

Rotary Encoder suits tight constraint applications.

MOD 700 is comprised of LED and OptoASIC configured into small caliper, offering resolutions as high as 2,540 PPR. Opto-ASIC phased array photo diode IC features high tolerance for axial movement (+/- 0.010 in.) and power consumption of 40 mA. Standard stainless steel code disk offers range of standard optical radii, from .375 to .860 in. MOD 700 can be surface mounted onto PCBs or installed onto...

Read More »
Pressure Transmitter suits HVAC monitoring and control.
Transmitters

Pressure Transmitter suits HVAC monitoring and control.

LPX 1000LCD wet/wet differential pressure transmitter is available in 2 diameters, allowing installation directly into existing mechanical gauge applications. It offers standard accuracy of 0.5% FS, and standard ranges of ±0.1 to ±6 in. H2O, 2-wire, 4-20mA output. Excitation voltage is 15 to 30 Vdc. Damping adjustment feature allows user to slow response time to eliminate nuisance...

Read More »
Proximity Sensor detects tiny objects 2 in. away.
Sensors / Detectors / Transducers

Proximity Sensor detects tiny objects 2 in. away.

Extended range 12mm ultrasonic SUPERPROX(R) Model SM300 Series detects all materials at distances from as close as 0.25 in. to as far as 2.00 in. from sensor face. At such distances, sensor is safely out of harm's way. It detects objects as small as 0.098 in. dia rod or 0.039 in. wide flat bar. Operating on 12 to 24 Vdc, sensor is equipped with both sinking (NPN) and sourcing (PNP) outputs.

Read More »
Measuring Wheels work with encoders to measure linear motion.
Rolling Wheels

Measuring Wheels work with encoders to measure linear motion.

Measuring Wheels are available in 6 in., 12 in., 1/3 meter, 200mm, 300mm, 400mm, and 500mm with choice of rubber or knurled aluminum contact surfaces. Cube Series Accu-Coder(TM) encoders with dual shafts work well in measuring wheel applications, since putting measuring wheel on each shaft results in twice the traction and improves bearing load by leveling radial pressure.

Read More »

All Topics