New Sensors / Detectors / Transducers Products

RTDs suit critical, high-temperature applications.

Series RTD Resistance Temperature Detectors (RTDs) are constructed with sensing element encapsulated in compacted MgO-insulated, metal-sheathed cable for resistance to pressure, shock, and vibration. They have -328 to +1,200Ã-

Current Transducers offer 0-5 Vdc or 4-20 mAdc output.

Split Core Transducers are available in 5 models including True RMS Model CR4100S, Loop powered Model CR4200S, Self-powered Model 4210S, Average RMS Model CR4400S, and DC current Model CR5200S. Powered by single 24 Vdc supply, units operate from 0-60Ã-

Photo Sensor emulates human eye in detecting ambient light.

Analog-output Model APDS-9002 is supplied in miniature ChipLED lead-free surface-mount package measuring 2.00 x 1.25 x 0.80 mm. Sensor detects ambient light level and provides linear proportional output that adjusts backlighting of display screen or keypad. Unit operates over 2.4-5.5 V supply voltage range and -40 to +85Ã-

Capacitive Load Sensors measure up to 250 lb.

Housed in 2 x 2 x 0.4 in. package with integrated electronics, Series M870 comes in 10, 50, and 250 lb capacities. By supplying 5 Vdc input to sensors, users can read 0-5 Vdc output with voltmeter or feed it into data acquisition or control systems. Sensors offer 2,000-4,000 mV of output change from baseline to full load with noise of Ã-

Different Types of Rubber Gaskets and Applications

Rubber gaskets are a type of mechanical seal located in between mated parts, typically in static applications with flat surfaces like joints.

AC Inductive Sensors offer current load capacity of 500 mA.

Series of AC Inductive Proximity Sensors includes 18 two-wire models available in M12 through M30 sizes, in shielded and unshielded configurations. All are tubular-style units suited for non-contact presence sensing of metal objects for positioning, automation, discrete control, or process monitoring. Multiple cable lengths are available.

Hall-Effect Sensor is suited for 3.6-24 V.

Digital switch A3245 has omnipolar capability that eliminates requirement for signal conditioning as well as need for magnet orientation for position sensing applications during manufacturing. Product incorporates voltage regulator, Hall-voltage generator, and small-signal amplifier in addition to chopper stabilization, Schmitt trigger, and short-circuit-protected open-collector output. Unit also...

Multi-Parameter Test Kit is fiber-optic based.

Dynamic Multi-Parameter Test Kit comes with BUS Commander Software and variety of Fabry-Perot fiber optic sensors, including temperature, pressure, strain, and refractive index sensors. BUS signal conditioner and acquisition system is configured with 2 channels, offering simultaneous reading with sampling rate to 1,000 Hz. System is upgradeable to up 8 channels per chassis, can be cascaded, and...

Smoke Detectors suit open areas with high ceilings.

Consisting of transmitter/receiver and reflector, System Sensor BEAM1224 Reflective Beam Detectors are capable of sensing smoke where spot-type detectors are difficult to install and maintain. They include 4 standard sensitivity selections and 2 acclimate settings. Listed for operation from -22 to 131Ã-

Digital AC Power Transducer offers RS485 communication.

Able to measure 3-phase voltage, current, and power, Shark 100 provides RS485 digital output using Modbus or DNP 3.0 protocols. Design facilitates installation and makes unit suited for embedded power telemetry for industrial, OEM, and Utility applications. DIN rail-mount product offers 120/220 AC or DC power supply, with 24-48 Vdc power supply also available.

Rotary Position Systems work in hazardous environments.

Intrinsically Safe (IS) rotary position and speed sensing system meets international CENELEC/ATEX ratings. Rotary encoder, cable assembly, and intrinsic safety barrier components combine to satisfy requirements for loop-approved, Class I, Division 1, Group A, B, C, and D sensing system. Built with BEI IS components, system can provide precision position measurement in wireline, slickline,...

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.