New Sensors / Detectors / Transducers Products

Touchscreen Sensors target retail and gaming environments.

ZYPOSÃ-® projected capacitive technology touch sensors are based on principle of embedding micro-fine sensing wires within multi-layer laminated screen behind protective front surface, ensuring that sensing medium is protected from accidental and malicious damage. With unlimited touch life, PCT is drift-free and can be operated with gloved or ungloved hand with response time of less than 20...

ElectrolyticTilt Sensor provides linear output.

Single Axis Linear Output Electrolytic Tilt Sensor features Ã-

Energy Detectors work with high rep rate lasers.

Compatible with handheld displays, PD10-pJ and PD10 Photodiode Energy Heads measure up to 10,000 Hz on low energy, high rep rate lasers. Former has pulse energy measurements of 10 pJ to 200 nJ and energy scales of 200 nJ to 200 pJ, while latter has pulse energy measurements of 1 nJ to 20 Ã-µJ and energy scales of 20 Ã-µJ to 20 nJ. Both feature spectral response from 0.19-1.1 Ã-µm,...

Wireless Module facilitates sensor networking.

Eliminating cables and batteries, solar-powered Model STM100 communicates via RF protocols and supports temperature, gas, humidity, illumination, location, and presence sensors. Unit is comprised of solar cell energy source, energy reservoir, analog and digital sensor connections, microprocessor, and radio transmitter. Designed to operate indoors, module requires 200 lux to generate energy and...

What You Need to Know About Adhesive N-95 Respirators

This white paper provides an in-depth overview of what you need to know about adhesive N-95 respirators.

Pressure Sensor targets acoustic/microphone applications.

Fiber optic Model FOP-MA has resolution as low as 0.0075 psi, frequency response up to 30 kHz, and operating temperature of -20 to 150Ã-

Air Sampling Smoke Detector protects up to 5,000 ft-² areas.

Providing early warning smoke detection for business-critical areas, VESDA LaserFOCUS VLF-500 is equipped with smoke level dial display that lets user obtain real-time smoke level information from safe distance. Instant Fault Finder(TM) facilitates identification of system issues, and Swift Start(TM) provides out-of-the-box installation routines. Other features include series of pre-engineered...

In-Line Rotary Torque Sensors offer 16-bit resolution.

Suited for automotive powertrain dynamometers, TORKDISCÃ-® Series 5300 features on-board electronic module that converts torque signals into high-speed digital representation. Digital data is transmitted to non-contacting pick-up loop with no risk of noise or data corruption. Remote receiver converts digital data to analog output voltage, frequency output, and serial digital output. Units...

Leak Tester replaces helium in critical part testing.

Designed for validating enclosures that must contain or exclude hazardous gases or liquids, Model M-1075-44 accommodates applications with leak rate limits specified as low as 10-4 sccs, and production volumes require testing of 7,000 parts/hr. It applies mass-flow technology using low-flow transducer, thermally isolated air reservoir, test chamber, and fixtures. During test process, VFD reports...

Pyroelectric Detector features flat spectral response.

Recommended for general use on pulsed lasers, Model PE50BBH handles max pulse rate of 1,000 Hz and has energy scales from 200 Ã-µJ to 10 J. High-speed black absorber features spectral response of 0.15-1.7 Ã-µm and 10.6 Ã-µ, and surface reflectivity rating of approx 5%. Lowest measurable energy on short pulse setting is 20 Ã-µJ and 100 Ã-µJ on long pulse setting. Delivering max...

Gas Detectors feature adjustable setpoints and alarms.

Gas Detectors continuously monitor carbon monoxide, ammonia, LP/gasoline vapors, hydrogen, and combustible gas. Units are available for 115 Vac operation, battery operation with 3.6 V NiCad rechargeable battery, and remote 115 Vac operations. They include audible and visual alarm, failure and pilot signals, circuit test button, and alarm set check button. Sensor elements are explosionproof and...

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.