Sealants

Coatings

Instant Floor Coating meets needs of health care facilities.

As single-coat system, UVolve® Instant Floor Guard can be directly applied to vinyl composite tiles in health care facilities to seal and protect over extended period of time. Solvent-free coating cures instantly viaÂ- UV light, so floors are ready for traffic immediately after application. While eliminating need to frequently strip, polish, and buff, non-flammable product also reduces...

Read More »
Membranes

Preprufe® Meets the Waterproofing Challenge at Four Mumbai Developments

When building in areas with high groundwater levels, it is absolutely vital to get the right waterproofing system in place from the start. Prevention is always better than cure, as an inadequate waterproofing system or one that fails can have disastrous consequences – from structural damage to health dangers and costly repairs. As more structures are now built near to the coast or in direct...

Read More »
Touch 'n Seal Introduces Updated Foam Kit 15FR Polyurethane Foam System with New, Easy-to-Use Features
Sealants

Touch 'n Seal Introduces Updated Foam Kit 15FR Polyurethane Foam System with New, Easy-to-Use Features

ST. LOUISÂ- – Advancing their commitment to providing quality products to their customers, Convenience Products, the manufacturer of Touch 'n Seal insulating foams and sealants, introduces an updated and improved Foam Kit 15FR Disposable Polyurethane Foam System. The Foam Kit 15FR is a portable, self-contained dispensing system for two component polyurethane spray foam. It provides...

Read More »
Sealants

Polyurethane Spray Foams act as insulation and sealant.

Able to replace 2001 NB foam, DuraTite™ 2.0 polyurethane spray foam (SPF) isÂ- 245fa-blown, 2.0 lb closed cell roofing and thermal insulation that has 3% bio-based content and 3% pre-consumer recycled content. R-value is 6.3 and 26 at 1 and 4 in., respectively. Primarily used in agricultural or industrial structures, BioSeal™ 3.0 and 6.0 are SPF water-blown closed cell...

Read More »
Non-Sag Joint Sealant for Above and Below the Waterline
Miscellaneous Compounds

Non-Sag Joint Sealant for Above and Below the Waterline

DECK-O-SEAL, a division of W. R. MEADOWS offering pool deck products, offers DECK-O-SEAL GUN GRADE for swimming pool projects above and below the waterline that require a short turn-around time. DECK-O-SEAL GUN GRADE is a premium quality, two-component, non-sag, non-flowing, polysulfide-based sealing compound. It is ideal for sealing joints including pool bottoms, sidewalls and areas with high...

Read More »
Polyurethane Sealant adds glossy, protective finish to metal.
Coatings

Polyurethane Sealant adds glossy, protective finish to metal.

CLEARLOK® is water-based polyurethane sealant that adds protective topcoat on most metal surfaces, including iron, steel, and aluminum. Non-polluting with no harmful VOC content, polymer sealant produces coating 0.0001–.00003 in. thick. It is rated for corrosion resistance of 12–24 hr of neutral salt spray or over 100 hr of humidity exposure. Available in 5 or 55 gal drums, product can...

Read More »
Coatings

As Materials Evolve, Freudenberg-NOK Helps Manufacturing Customers Tackle Escalating Compatibility Issues

PLYMOUTH, Mich. – Oil spots on the driveway are largely a thing of the past, thanks to advanced elastomeric sealing materials. But changes in powertrain technology, lubricants, durability standards and consumer expectations are driving new compatibility requirements in today's cars and trucks, and Freudenberg-NOK Sealing Technologies (Freudenberg-NOK) is at the forefront of helping its...

Read More »
Firestop Gasket eliminates caulking process.
Firestops

Firestop Gasket eliminates caulking process.

Offering 1-step solution, Series TTG SpeedFlex® Track Top Gasket provides fire, smoke, and acoustical ratings for head-of-wall joints between gypsum walls and flat concrete floor slabs. Because it is installed at same time as top track, intumescent firestop cover eliminates caulking process and need for second inspection.Â- Gasket is UL classified up to 2 hours, provides acoustical...

Read More »
Adhesives

Polyurethane Sealant/Adhesive leverages i-Cure technology.

Weather-resistant Sikaflex®-295i UVÂ- features i-Cure® (intelligent curing) technology, which is chemical base for cross linking technology for polyurethane sealants and adhesives. Developed for use in bonding applications for polycarbonate and acrylic (PMMA) windows, this single-component polyurethane adhesive and sealant does not include any added solvents and has minimized VOC...

Read More »
PC Automotive Glazing Gains Momentum with Launch of Fiat's 500L MPV Using SABIC's LEXAN(TM) Resin in Rear Fixed Side Windows
Miscellaneous Film

PC Automotive Glazing Gains Momentum with Launch of Fiat's 500L MPV Using SABIC's LEXAN(TM) Resin in Rear Fixed Side Windows

SABIC's Innovative Plastics business is marking continued progress in the adoption of its polycarbonate (PC) glazing materials for automotive window applications with Fiat's new 500L multi-purpose vehicle (MPV), which features rear fixed side windows molded from SABIC's clear LEXAN(TM) GLX resin and black CYCOLOY(TM) resin. These high-performance SABIC materials help reduce weight by about 35...

Read More »

All Topics