Sealants

Sealants

Flat Gaskets for Especially Demanding Applications in the Processing Industry

PLYMOUTH, Mich.,Â- – Increasing requirements, including rising surface pressures and high operating temperatures, have made flat gaskets indispensable in the chemical and pharmaceutical industries. However, fluctuating loads and changes in internal pressure pose major challenges to their performance. Freudenberg-NOK Sealing Technologies (Freudenberg-NOK) offers flat gaskets made of three...

Read More »
Window and Door/Fireblocking Foam Sealant has all-in-one formula.
Sealants

Window and Door/Fireblocking Foam Sealant has all-in-one formula.

While formulated to serve as low-pressure, expandingÂ- Window & Door/Insulating foam that is AAMA 812-10 compliant and will not bow window or door frames, Thermal Seal All-In-One Foam Sealant may also be used as UL-evaluated fireblocking foam for use in Type V non-rated 1 & 2 family residential construction. Closed cell content increases R-value as well as overall strength and resistance to...

Read More »
High-Temperature Sealant suits applications to 950°F.
Miscellaneous Compounds

High-Temperature Sealant suits applications to 950°F.

Formulated by combining high-temperature resin with ceramic fibers and powders, Pyro-Putty™ 950 can be used as gasketing compound for boilers, compressors, heat exchangers, furnaces, ovens, and exhaust manifolds. Product repairs rough, scored, or irregular surfaces and is resistant to chemical and steam attack, high pressure/vacuum atmospheres, mechanical vibration, and joint movement. Offered...

Read More »
Fiber

Garlock Discontinues Style ST 706. Equalseal.com Introduces a Performance Equal

Because Garlock Sealing Technologies discontinued offering style ST-706 inorganic fiber gasket material in May 2014, Equalseal.com now offers a replacement and performance equal. Equalseal EQ706 EQ706 (Black) is a premium grade, in-organic fiber and NBR sheet formulated for high temperatures applications. Recommended for use in sealing against both saturated and superheated steam, along with high...

Read More »
Sealants

Machinists Inc. Steps in to Provide Needed Fix for City of Seattle

Machinists Inc. had an opportunity to work on a special project in West Seattle with Seattle Public Utilities (SPU), where the aging, 1930s era water system, was giving the city of Seattle some problems. A pressure valve there has been leaking water into a reservoir for a number of years. Because of erosion, it had created a non-sealing surface, so it wouldn't seal tight. It meant the city of...

Read More »
Sealants

WACKER and Inpro Develop a New Silicone Adhesive for Plastic Oil Pans

Munich — Munich-based chemical Group WACKER, and inpro Innovationsgesellschaft fÃ-¼r fortgeschrittene Produktionssysteme in der Fahrzeugindustrie mbH have developed a silicone adhesive-sealant for mounting vehicle oil pans. Sold under the name ELASTOSIL® RT 779, the new product adheres to both aluminum and polyamide. Plastic oil pans can now be mounted without mechanical fasteners....

Read More »
Moisture-Cure Pourable Sealant requires no mixing.
Sealants

Moisture-Cure Pourable Sealant requires no mixing.

Designed for use with M-Curb™ Pitch-Pan System in built-up and modified bitumen roof systems, M-Thane™ One-Part Pourable Sealant can be applied in damp and cold as well as dry climates. Polyether sealant is solvent-free with less than 25 g/l VOC and does not outgas or bubble up on damp surfaces. Made up of 100% solids, self-leveling product will not shrink and can be applied at temperatures...

Read More »
Packaging Materials

Conditioned Attic System promotes comfortable, efficient homes.

Approved for use in climate zones 2B and 3B, PROPink® High Performance Conditioned Attic System delivers air, thermal, and moisture in unvented attics where air handling HVAC unit is placed. System components include PROPINK ONE® All Purpose Foam Sealant applied to eaves, framing gaps, and sheathing joints; blown-in PROPINK® EcoTouch® Loosefill Insulation; and netted...

Read More »
Two Part, Room Temperature Curing Epoxy Features Ultra Low Coefficient of Thermal Expansion
Coatings

Two Part, Room Temperature Curing Epoxy Features Ultra Low Coefficient of Thermal Expansion

Master Bond EP42HT-2LTE is often chosen for a variety of bonding, sealing, coating and select casting applications in the electronic, aerospace, optical and specialty OEM industries. This two component epoxy has a flowable paste consistency that enables precise alignment with minimal fixturing. It cures at room temperature or more quickly with the addition of heat. This system is notable for...

Read More »
Polyurethane Foam Sealant suits fireblocking applications.
Sealants

Polyurethane Foam Sealant suits fireblocking applications.

Formulated for draft, smoke, and fireblocking applications in single family residential construction, Flame Tech FB is recognized by UL as alternative fireblocking material and colored orange to facilitate inspection. Closed cell insulating foam sealant expands up to 3 times original bead size to seal off gaps and voids around wires, pipes, ducts, and similar openings. Tack-free in as little as...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers