Sealants

Quartz Filled Two Component Epoxy Features High Temperature and Chemical Resistance
Solvents

Quartz Filled Two Component Epoxy Features High Temperature and Chemical Resistance

Master Bond Supreme 45HTQ is a thermally stable, two component quartz filled epoxy system. It features exceptional abrasion and chemical resistant properties. It will withstand exposure to petrochemicals, acids, bases and solvents. It retains its performance profile at elevated temperatures up to +450°F. Supreme 45HTQ has a 100 to 30 mix ratio by weight and offers a working life exceeding...

Read More »
Sealants

Primerless Silicone Sealant suits air-vapor barrier systems.

Formulated for primerless use on transition seals, one-part AVB Silicone offers optimal adhesion between dissimilar materials in air and vapor barrier systems such as HDPE peel and stick laminates, liquid applied weather barriers, andÂ- building wraps. Product is durable in all weather conditions and is compatible with natural stones and other porous surfaces. With ±25%...

Read More »
Coatings

Epoxy Adhesive/Sealant/Coating cures over 170-175°F range.

Able to cure in 20–30 min at 170 to 175°F or 10–15 min at 250°F, Supreme 3HT-80 does not require any mixing prior to use, has unlimited working life, and can be stored in conventional refrigerators. Single-component, 100% reactive system, offering optimal properties when cured at 250°F, bonds to various substrates — metals, composites, glass, ceramics, vulcanized rubbers,...

Read More »
Hydraulic / Pneumatic / Radial Shaft Seals

PTFE Radial Shaft Seals meet challenge of churning heavy dough.

Able to withstand elevated temperatures and speeds, Simmerring® Radiamatic HTS II EWS polytetrafluoroethylene (PTFE) radial shaft seals prevent runout separation and leakage as well as exhibit chemical resistance to industrial fluids and cleaning agents. Design combines lip seal and ferrule technology of Radiamatic HTS II with flexible PTFE bellows elements andÂ- slide bearing. Arrayed...

Read More »
Coatings

Instant Floor Coating meets needs of health care facilities.

As single-coat system, UVolve® Instant Floor Guard can be directly applied to vinyl composite tiles in health care facilities to seal and protect over extended period of time. Solvent-free coating cures instantly viaÂ- UV light, so floors are ready for traffic immediately after application. While eliminating need to frequently strip, polish, and buff, non-flammable product also reduces...

Read More »
Membranes

Preprufe® Meets the Waterproofing Challenge at Four Mumbai Developments

When building in areas with high groundwater levels, it is absolutely vital to get the right waterproofing system in place from the start. Prevention is always better than cure, as an inadequate waterproofing system or one that fails can have disastrous consequences – from structural damage to health dangers and costly repairs. As more structures are now built near to the coast or in direct...

Read More »
Touch 'n Seal Introduces Updated Foam Kit 15FR Polyurethane Foam System with New, Easy-to-Use Features
Sealants

Touch 'n Seal Introduces Updated Foam Kit 15FR Polyurethane Foam System with New, Easy-to-Use Features

ST. LOUISÂ- – Advancing their commitment to providing quality products to their customers, Convenience Products, the manufacturer of Touch 'n Seal insulating foams and sealants, introduces an updated and improved Foam Kit 15FR Disposable Polyurethane Foam System. The Foam Kit 15FR is a portable, self-contained dispensing system for two component polyurethane spray foam. It provides...

Read More »
Sealants

Polyurethane Spray Foams act as insulation and sealant.

Able to replace 2001 NB foam, DuraTite™ 2.0 polyurethane spray foam (SPF) isÂ- 245fa-blown, 2.0 lb closed cell roofing and thermal insulation that has 3% bio-based content and 3% pre-consumer recycled content. R-value is 6.3 and 26 at 1 and 4 in., respectively. Primarily used in agricultural or industrial structures, BioSeal™ 3.0 and 6.0 are SPF water-blown closed cell...

Read More »
Non-Sag Joint Sealant for Above and Below the Waterline
Miscellaneous Compounds

Non-Sag Joint Sealant for Above and Below the Waterline

DECK-O-SEAL, a division of W. R. MEADOWS offering pool deck products, offers DECK-O-SEAL GUN GRADE for swimming pool projects above and below the waterline that require a short turn-around time. DECK-O-SEAL GUN GRADE is a premium quality, two-component, non-sag, non-flowing, polysulfide-based sealing compound. It is ideal for sealing joints including pool bottoms, sidewalls and areas with high...

Read More »
Polyurethane Sealant adds glossy, protective finish to metal.
Coatings

Polyurethane Sealant adds glossy, protective finish to metal.

CLEARLOK® is water-based polyurethane sealant that adds protective topcoat on most metal surfaces, including iron, steel, and aluminum. Non-polluting with no harmful VOC content, polymer sealant produces coating 0.0001–.00003 in. thick. It is rated for corrosion resistance of 12–24 hr of neutral salt spray or over 100 hr of humidity exposure. Available in 5 or 55 gal drums, product can...

Read More »

All Topics