Concrete/Masonry Sealer offers one-step application.
Water-based All-ShieldÃ-® Concrete & Masonry Sealer stops water penetration and damage in concrete, masonry, brick, block, stone, tile, stucco, and adobe. Clear, non-yellowing, VOC compliant formula allows substrate to breathe and water vapor to escape, providing protection for up to 8 years. Mold and fungus resistant, it also protects against freeze/thaw cycles, efflorescence, and alkali....
Read More »
Flexible Adhesive/Sealant meets USP Class VI requirements.
Optically clear, UV-curable UV15X-6 polymer system adheres to various substrates, including plastics and elastomers. Suited for medical device assemblies, single-component urethane formulation is 100% reactive, does not contain any volatiles, and also acts as electrical insulator. Cure is not affected by air or moisture, and cured material exhibits abrasion resistance. Bonds resist exposure to...
Read More »Semi-Solid Anaerobic Stick Products will not leak or drip.
QuickStix(TM) 534(TM) Hi-Tack Gasket Dressing allows cut gaskets to be positioned and held in place while mating surfaces are aligned for assembly. Product cures at room temperature. Oil resistant QuickStix(TM) 548(TM) Gasket EliminatorÃ-® Flange Sealant prevents fluid or gas leaks on rigid iron, steel, and aluminum flanges. QuickStix(TM) 668(TM) Retaining Compound bonds non-threaded...
Read More »
Adhesive/Sealant bonds dissimilar substrates.
Cured at room or elevated temperatures, 2-component EP21TDCHT-1 has temperature range serviceability of -100 to +400Ã-
Read More »
UNLOCKING THE HIDDEN POTENTIAL OF MANUFACTURING: How lubricants can help increase productivity and reduce total cost of ownership
This paper illustrates how manufacturing companies have successfully worked with Shell Lubricants to upgrade their lubrication and extract value by reducing TCO and improving equipment productivity.
Read More »
Epoxy Adhesive/Sealant/Coating is chemical-resistant.
Featuring thermal stability, 2-component EP21ARHT-1 is 100% reactive and does not contain any solvents or diluents. It has 2:1 mix ratio by weight and cures at room temperature. Exhibiting minimal shrinkage upon cure, product does not sag or drip on vertical surfaces. Designed to withstand thermal shock and abrasion, it adheres to metals, glass, ceramics, cements, woods, vulcanized rubbers, and...
Read More »Ceramic Sealer provides 1800-
Applied by caulking cartridge, 7030 sealer forms gas tight seals with no objectionable odors or harmful fibers. Free flowing formulations are available for rapid or automatic dispensing applications. Room temperature-cure product bonds to metals, ceramics, door gaskets, tadpole gaskets, and ceramic cloths with no special surface treatment required. Corrosion and erosion resistant coatings are...
Read More »
Epoxy provides high thermal conductivity.
Type EP34AN room temperature cure, 2-component epoxy adhesive/sealant, with thermal conductivity of 22-24 BTU/in/ftÃ-²/hr/Ã-
Read More »Silicone Rubber Sealants suit high-volume manufacturing.
LoctiteÃ-® 5210 and LoctiteÃ-® 5211 non-corrosive sealants are used for wire tacking, selective sealing, vibration dampening, and repair/rework applications on PCBs. Thixotropic, moisture curing LoctiteÃ-® 5210 lets product conform to applied components while remaining where dispensed. Medium viscosity LoctiteÃ-® 5211 allows material to flow into applied areas and encapsulates...
Read More »Module Sealant suits automotive electronics assembly.
Medium-viscosity, UV- and moisture-curing LoctiteÃ-® 5252 is designed for post-assembly use on electronic module enclosures. Based on polyether rubber technology, thixotropic sealant withstands temperatures from -40 to +125Ã-
Read More »Surfactant-Free Sealant seals porous metals.
HPS(TM) 1000 and 1100 seal microscopic voids in leaking porous metals such as powdered-metal castings and sintered-metal parts through vacuum application process. Both feature resistance to degradation by hydrocarbon solvents, and lubricity that lowers tool wear. Surfactant-free products facilitate washing of impregnated parts and eliminate need for pretreatment of disposed waste rinse water.
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
