Sealants

High-Temperature Coating seals, protects steel parts/structures.
Coatings

High-Temperature Coating seals, protects steel parts/structures.

Applicable to diverse industries, Corr-Paint(TM) CP4020 single-part, gray-pigmented, silicone-based, water-dispersible coating system adheres to sandblasted as well as marginally prepared surfaces. Coating dries at room temperature and cures as coated structure is ramped up to its operating temperature. At temperatures to 1,100°F, resultant coating is color stable and resistant to...

Read More »
Ceramic-Silicone Potting Compound suits applications to 900°F.
Encapsulants

Ceramic-Silicone Potting Compound suits applications to 900°F.

Used to insulate moisture-sensitive electrical components, including cartridge heaters and high power case resistors, Sil-Bond(TM) 905 demonstrates moisture resistance with weight gain of less than 1% after exposure to 900°F and 24 hours water immersion. Shrinkage rate is also less than 1% and dielectric strength is greater than 250 V/mil. Supplied as powder and liquid system, compound...

Read More »
Miscellaneous Compounds

General-Purpose Adhesive/Sealant features tin-free formula.

Intended for household appliance, automotive, and electronics sectors, ELASTOSIL® N9111 single-component silicone rubber compound cures at room temperature in presence of atmospheric moisture to yield silicone with optimized heat resistance and mechanical properties. This alkoxy-curing RTV-1 system, formulated with tin-free catalyst, is fully compatible with platinum-catalyzed silicone...

Read More »
High Temperature Epoxy seals tubular heaters to 570°F.
Epoxies

High Temperature Epoxy seals tubular heaters to 570°F.

Consisting of unfilled, 100% solids epoxy system, Aremco-Bond(TM) 526N can be used continuously at temperatures to 570°F. Product features volume resistivity of 4.0 x 1014 W-cm, dielectric strength of 450 V/mil, and dielectric constant of 3.01 at 1.0 Hz. Flexural and tensile strengths are 16,000 and 2,800 psi, respectively. With 1:1 mix ratio, epoxy provides mixed viscosity of 4,000 cP and...

Read More »
A Guide to Quality Control of the SMT Process
Sponsored

A Guide to Quality Control of the SMT Process

The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.

Read More »
Water-Based Sealant aids assembly of air intake panel filters.
Adhesives

Water-Based Sealant aids assembly of air intake panel filters.

Developed primarily to bond pleated glass or paper media to frames of air intake panel filters, FilterFAB 150 blends high viscosity and high solids into thick formula that sets instantly and remains flexible over time. Fiber-filled, vinyl acrylic copolymer sealant is safe to use, non-flammable, produces no harmful fumes, and contains no added formaldehyde. With added antimicrobial agents, product...

Read More »
Food-Grade Silicone Sealant comes in standard, custom colors.
Sealants

Food-Grade Silicone Sealant comes in standard, custom colors.

Replacing SU5005 RTV food grade silicone sealant, EMI5005 RTV does not crack or become brittle with age and offers unprimed adhesion to plastic, metal, synthetic rubber, glass, ceramics, and porcelain. This 100% food grade silicone sealant, approved by the USDA, FDA, and NSF, is available in clear, white, black, aluminum, and red high temp. Application range is -35 to +140°F, and service...

Read More »
Sealants

Universal Sealing Material meets food/beverage processing needs.

To meet sealing challenges surrounding food and beverage processing, Fluoroprene® XP 40 withstands both chemically aggressive cleaning agents and sterilizing steam as well as high-fat concentrations and flavoring agents found in processing applications. This universal sealing material is resistant to temperatures from -15 to +200°C and suited for facilities that manufacture and...

Read More »
Epoxy Adhesive/Sealant meets USP Class VI requirements.
Epoxies

Epoxy Adhesive/Sealant meets USP Class VI requirements.

Suited for medical applications, silver-filled EP3HTSMED is 100% reactive with tensile shear strength exceeding 1,000 psi and volume resistivity less than 0.001 Wcm. Thixotropic paste requires no mixing and needs only contact pressure during heat cure of 20-40 min at 300°F or 40-90 min at 250°F. Serviceable over temperature range of -60 to 400°F, electrically conductive product...

Read More »
Air Filters

Freudenberg Helps Vehicles Perform Better, from Reducing Noise and Vibrations to Making the Air Inside Cars Cleaner

DETROIT - Freudenberg North America uses technical expertise and cross industry experience to revolutionize 2012 vehicle parts for the automotive industry. The Freudenberg family of companies has broad cross-industry reach and this allows us to bring innovative technologies from other industries and apply them to the automotive realm," said Leesa Smith, president, Freudenberg North America...

Read More »
Hydraulic Fluids

Champion Oil's Racing and Performance Division to Add New Purpose-Built Products for 2012

Champion Oil, a leader in manufacturing and distribution of specialty lubricants since 1956, announced today the addition of 10 new purpose-built products available in January from Champion's Racing and Performance Division. The first wave of 2012 new products will start filling the wholesale pipeline right after the first of the year. Champion's North American Distribution will have an option of...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers