New Sealants Products

Urethane requires only one coat.

High-build, fast-drying, direct-to-metal Fast Clad(TM) DTM Urethane can be applied at 6-9 mils DFT in single coat with no outgassing or pinholing. Urethane dries in 1 hour as corrosion-resistant finish and may be applied at temperatures as low as 35Ã-

Black Aerosol Foam comes in seamless, leak-proof can.

SuperSealÃ-® Duct Butter's aerosol can will not leak or corrode, increasing its shelf life and stability. Product retains its shape and volume after curing is completed, resulting in improved finished appearance. Used for spot and edge repair of ductboard or liner, it can also be used to seal gaps between liner sections or fittings. SuperSeal maintains thermal integrity of insulation it is...

Threadlocker/Sealant replaces lockwashers.

PERMABONDÃ-® HH120 seals fasteners against water and chemicals. It obtains fixture strength in 15-20 min on active metals such as iron, steel, nickel, and aluminum. Viscosity is 7000 cp, allowing for gap filling up to 10 mil. HH120 features locking strength of 250-350 lb-in. and retaining strength of over 2000 psi. It is suitable for locking bolts, nuts, and screws for permanent assembly, and...

Sealant penetrates porosity in powder metals.

LoctiteÃ-® PM 5120 plating grade sealant is intended for shallow penetration to seal against low pressure plating operations. Durable enough to resist strong acids and bases at low temperatures, sealant is formulated for controlled cure at room temperature on active metal substrates to avoid bleed out. Fluorescent dye facilitates cross-sectional inspection. Loctite PM 5120 is easy to recover...

Key Considerations When Choosing the Right Medical Device Development Experts: From Concept to Market

This eBook covers various factors to consider when selecting a medical device development partner to ensure proper guidance from concept to launch.

Adhesive/Sealant has service range of -75 to 500-

Polymer System X5HT one component, contact type adhesive/sealant offers dimensional stability and creep- and chemical-resistance. Curing process requires application to each substrate, application of pressure (less than 50 psi), and curing at 300 to 400Ã-

Sealant is suitable for construction market.

Available in gun-grade cartridges and sausage packs, Chem-CalkÃ-® 2000 one-Part, solvent-free, multi-function sealant has 30 minute skin time. Its cures at 77Ã-

Ceramic Coating seals thermal spray coatings.

Ceramacoat(TM) 503-VFG-S ceramic-based sealant is formulated as single part, water-dispersible, alumina-filled system. Inert, chemically resistant, inorganic material does not outgas or decompose in high temperature corrosive applications to 3200-°F. Applied using sponge brush or pneumatic spray equipment, full cure is achieved after exposure for 1-2 hours at 700-°F. It sinters and strengthens...

Caulks and Sealants provide concrete and mortar repair.

Polyurethane Concrete Repair is paintable sealant for joints up to 1 in. wide. It is appropriate for indoor or outdoor applications. Concrete and Mortar Repair is silicone sealant that is suitable for joints and cracks and prevents ice and water damage. Concrete Driveway Repair is latex caulk with resistance to wear. It remains flexible to prevent damage by ice and water. Mortar Patch watertight...

Epoxy Resin System offers chemical resistance.

Two-component EP41S-2 epoxy adhesive/sealant and coating cures at ambient temperatures or more quickly at elevated temperatures. It is 100% reactive and contains no solvents or diluents. EP41S-2 adheres to metals, glass, ceramics, wood, vulcanized rubbers, and plastics. It withstands prolonged immersion in strong organic solvents. Operating temperature range is -60 to +275Ã-

Coating System prevents floor erosion.

Tigerguard(TM) coating system provides high mil barrier on floors that need to stand up harsh conditions. It offers durable surface that is easy to clean and maintain, and adds high gloss shine to work environments. It also provides superior gloss retention, fills in surface defects, and resists mars, scratches, abrasion, chemicals, and impact. Tigerguard system requires no special skills for...

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.