Single Bladed Saw is fully automatic.

Single Bladed Saw is fully automatic.

Fed by automated material handeling system, Omni Miser pushes material through machine at 51 in./sec and prints part ID's and other information. Wood processing system downloads optimized component cutting and marking lists from design office, selects raw stock from magazines or bunk feeder, and dispenses it to saw. Product, with servo-controlled gripper and pneumatic gripper/pusher, confirms...

Read More »
Saws have triple edged, 7 in. blades.

Saws have triple edged, 7 in. blades.

Mini-Bear SawsÂ-® include 3 models for pruning, PVC cutting, and woodworking. Bear Saw Pruning Saws have 17 teeth-per-in. blade and slice through 2 in. tree branches. PVC Pipe Mini-Saws cut through PVC and ABS piping as well as plastic and polystyrene sheets. Woodworking Mini-Saws, equipped for general and fine woodworking, also cut plywood, hardwoods, and particle board. All pull-stroke...

Read More »
Reciprocating Saw features 10 A motor.

Reciprocating Saw features 10 A motor.

Sawzall Model 6509 offers 0-2800 spm, variable speed trigger with Â-¾ in. stroke length and Quik-Lok blade clamp for tool-less blade changes. Blades may be clamped upside down for special cutting needs. Double bearing wobble plate mechanism and lighter spindle help minimize vibration. Tool is double insulated and has heavy duty S jacket, 8 ft 2-wire rubber cord. Saw uses standard Â-½ in....

Read More »
Saw provides controlled cutting of plastic car panels.

Saw provides controlled cutting of plastic car panels.

With adjustable blade guard to control cutting depth, AT193 Reciprocating Air Saw uses 3/8-in. piston stroke to perform straight and scroll cuts. Saw, with motor speed of 5,700 rpm, includes three 2.75 in. bi-metal blades. Optional blades are 2.75-5.12 in. Safety lever throttle, adjustable speed regulator, and comfort grip housing make saw safe and comfortable to operate. Exhaust hose, with...

Read More »
Rotary Saw cuts drywall and solid surface materials.

Rotary Saw cuts drywall and solid surface materials.

With 5 A motor, 2 speed settings, and adjustable base/depth guide, model 1639 cuts ceramic wall tile, cement board, particle board, plaster, lath, foam board, and composites. Bump-off switch allows for 1-handed operation with speeds of 25,000 and 30,000 rpm. Glass-filled nylon foot plate/depth guide adjusts in seconds and will not break or deform under pressure. Unit comes with 1/8 and 1/4 in....

Read More »
Sportsman's Combo Kit suits multi-purpose cutting duties.

Sportsman's Combo Kit suits multi-purpose cutting duties.

Sawzall kit consists of Sawzall, 18 V Xenon bulb work light, two 18 V 2.4 A-hr batteries, universal 1 hr charger, and three 9 in. stainless steel SawzallÂ-® blades, all in Mossy Oak(TM) Camouflage Buckbag. Cordless reciprocating saw with orbital action (The Hatchet(TM)) cuts through wood and metal. It offers 3/4 in. blade stroke and 0 to 2700 spm variable-speed trigger. Its counter balanced...

Read More »

Cordless Jig Saws offer tool-free blade change.

Models 52324 (24 V), 52318 (18 V), and 52314 (14.4 V) can cut up to 2 3/4 in. in wood or 5/16 in. in steel. Motor provides 2,000 strokes/min, while magnesium gear housing adds durability. Accepting T-Shank blades, 3-way grip eliminates blade slippage or pullout and helps prevent breakage. Die-cast aluminum foot bevels to 45Â-

Read More »
Horizontal Production Bandsaw is fully automatic.

Horizontal Production Bandsaw is fully automatic.

Model 7112A, 12 in. bandsaw has precision carbide and ball bearing blade guide assemblies mounted on dual adjustable arms. It provides proper blade alignment, blade support, and consistent square cuts. Equipped with direct drive gearbox and motor drive system, saw blade is powered without use of belts. Model 7112A includes AC inverter, infinitely variable speed control (65 to 400 sfm), fully...

Read More »
Miter Saw cuts non-ferrous materials at high speed.

Miter Saw cuts non-ferrous materials at high speed.

Model KM14HS, with 14 in. carbide-tipped steel blade, miters 45 degrees left and right, and has 4Â-½ in. capacity at 90 degrees, with 4 x 3Â-½ in. capacity at 45 degrees. It features twin V-belt drive, 5 hp motor with manual switch, cast-iron construction, dual cam-lock vise and OSHA safety blade guard. Its 1 in. spindle has sealed ball bearings and provides 4400 spindle speed at 3450 rpm.

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics