Cordless Chain Saw produces low noise and no emissions.
Powered by two 18 V LXTÃ-® Li-Ion batteries for 36 V power and run time, HCU02ZX2 cordless chain saw features 12 in.àguide bar and chain speed of 1,650 fpm. Tool operates at 89 dB(A) under no-load conditions and 90 dB(A) under load and features zero emissions. Unit also offers tool-less chain adjustments and front hand guard. Also available, 36V LXTî Lithium-Ion 12...
Read More »Portable Bandsaw Mill meets needs of global customers.
With 70 cm throat opening and ability to- handle logs up to 90 cm in diameter, LumberPro HD36 enables sawyers to mill virtually any hardwood or softwood tree into valuable lumber. System features auto-locking sawhead, auto-on/off blade lube, and laminated sawhead construction. Wide-track log deck is built of twin double-plated commercial-grade steel rails. LumberPro HD36 can be configured...
Read More »Portable Bandsaw Mill meets needs of global customers.
With 70 cm throat opening and ability toÃ- handle logs up to 90 cm in diameter, LumberPro HD36 enables sawyers to mill virtually any hardwood or softwood tree into valuable lumber. System features auto-locking sawhead, auto-on/off blade lube, and laminated sawhead construction. Wide-track log deck is built of twin double-plated commercial-grade steel rails. LumberPro HD36 can be configured...
Read More »
Utility Band Saw cuts round material up to 8.5 in. diameter.
Scotchman Industries® is pleased to announce the addition of the SU-280 Utility Band Saw to their lineup of metal fabrication equipment. The SU-280 features a pull-down pivoting band saw mounted on an elevated cutting table similar to the Scotchman Industries line of Cold Saws. Capable of cutting round material up to 8.5” in diameter, the SU-280 offers an increased cutting capacity and has the...
Read More »
Hemp: An Eco-friendly Substitute for Cotton and Petroleum-based Synthetics
To learn more about hemp's history, composition, performance, and its sustainability and cost, download this white paper now.
Read More »
Upcut Circular Cold Saw cuts non-ferrous materials.
Available in 230 and 460- V configurations, SUP-500 NF employs 20 in., 120-tooth carbide blade capable of producing up to 7 in. dia round cuts and up to 11.75 x 5 in. rectangular cuts. Saw offers adjustable feed rate and integrated debris collection as well as 4 pneumatic clamps for securing material being cut. Additionally, safety features include dual hand operation and safety...
Read More »
Utility Band Saw cuts round material up to 8.5 in. diameter.
Scotchman Industries-® is pleased to announce the addition of the SU-280 Utility Band Saw to their lineup of metal fabrication equipment. The SU-280 features a pull-down pivoting band saw mounted on an elevated cutting table similar to the Scotchman Industries line of Cold Saws. Capable of cutting round material up to 8.5” in diameter, the SU-280 offers an increased cutting capacity and has...
Read More »
Upcut Circular Cold Saw cuts non-ferrous materials.
Available in 230 and 460Ã- V configurations, SUP-500 NF employs 20 in., 120-tooth carbide blade capable of producing up to 7 in. dia round cutsÃÂ andÃÂ up to 11.75 x 5 in. rectangular cuts. Saw offers adjustable feed rate and integrated debris collection as well as 4 pneumatic clamps for securing material being cut. Additionally, safety features include dual hand operation...
Read More »
Automatic Saw offers accurate crayon marking.
With independent edge detection, TigerSaw1000 Crayon Marking Automatic Push Feed System features back- scan speeds in excess of 325 fpm and push cut speeds in excess of 225 fpm. System handles optimization for cutting raw material for panel glue up. TigerSaw1000 is available with DOD inkjet direct applications labeler or CIJ Video Jet Labeler for higher production. In addition to panel stock and...
Read More »
Automatic Saw offers accurate crayon marking.
With independent edge detection, TigerSaw1000 Crayon Marking Automatic Push Feed System features backÃ- scan speeds in excess of 325 fpm and push cut speeds in excess of 225 fpm. System handles optimization for cutting raw material for panel glue up. TigerSaw1000 is available with DOD inkjet direct applications labeler or CIJ Video Jet Labeler for higher production. In addition to panel stock...
Read More »
Cutting Machine automates positioning, compound mitering.
Offering- automated material length positioning and compound mitering, TigerAngle serves applications requiring high-volume horizontal and vertical angle cutting. It can be used as stop in set point operation or used as push feed operation. Miter saw with TigerStop drives offers accurate automated miter adjustments, while Beamworks Software further facilitates compound miter...
Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.
Read More »
