Horizon Industries adds an Engine Lathe and Automatic Saw

Horizon Industries, located in Columbia, Pa, has added two new machines to allow for larger shafts or pipes in short production runs.   The Clover Engine Lathe has a large thru hole (4 1/8 ) to allow for larger pieces of tubing, pipe and other metal parts in short production runs.  Because there is a very short set up time on this machine, we can take on customers with little notice,...

Read More »
Automatic Circular Saw Added to Kasto's Workshop Range

Automatic Circular Saw Added to Kasto's Workshop Range

Intended for use by fabricators, machine shops and small to medium size suppliers of raw materials, German sawing machine manufacturer, KASTO, has added a new, compact circular saw to its workshop range. Availability in the UK is through the company's subsidiary in Milton Keynes. Called KASTOradial A 10, the hydraulically actuated saw is designed for cutting to length of solids, tubes and...

Read More »
Double End Trim Saw features variable speed feed.

Double End Trim Saw features variable speed feed.

Double End Trim Saw is equipped with two 7.5 hp direct arbor saw motors that utilize- 16 in. diameter blades and 2-strand feed chain that is powered by 1 hp motor and gear reducer. Machine double end trims pallet lumber, both decking and stringers, to finished lengths of 28–60 in. Standard features include hopper feed system and quick adjust length changeover. Scrap conveyors, custom fit for...

Read More »

Panasonic Showcases New Dual Voltage Technology for Tough IP(TM) Power Tools at IBS 2013

Panasonic Booth Number: C6638 LAS VEGAS - Panasonic Power Tool Division, a pioneer in cordless power tool technology, showcases the expansion of their line of Tough IP(TM) Li-Ion Cordless Power Tools at the2013 International Builders' Show. The Tough IP line now features products with new Dual Voltage Technology, allowing select tools to be used as both 18-volt and 14.4-volt with just a switch of...

Read More »
Automatic Bandsaw cuts bars and pipes with minimal vibration.

Automatic Bandsaw cuts bars and pipes with minimal vibration.

Designed to cut pipes and solid materials from 0.75–24 in. in diameter, Model HBP-610A features horizontal band arrangement and cast iron, dual column frame, which utilizes positive hydraulic downfeed, eliminates vibration, and provides rigid support for blade tensioning. Frequency-controlled drive delivers cutting speeds from 62–426 ft-²/min. Downfeed power and saw blade pressure are...

Read More »

Cordless Jigsaw is powered by 12 V max Lithium-Ion battery.

Model VJ01W is driven- by motor that delivers 0–2,400 strokes/min,- and- variable-speed control dial lets user match speed to application. With 3 orbital settings plus straight cutting,- tool is suited for cutting range of materials. Through-the-body dust port is provided for use with- vacuum, while built-in dust blower clears line-of-cut for improved visibility. Respective max cutting...

Read More »
Stockholder Doubles Cutting Productivity with Kasto Bandsaw

Stockholder Doubles Cutting Productivity with Kasto Bandsaw

Cutting-to-length of aluminium and stainless steel stock is performed twice as quickly at the Coventry centre of Richard Austin Alloys (RAA), following the replacement of an ageing bandsaw with a KASTOtwin A4x5 in June 2012. Having 440 x 520 mm cutting capacity, the double column machine is able to process all of the company's existing sizes of round and flat bar, tube, angle and box section, as...

Read More »
Automatic Hydraulic Bandsaw offers cutting speeds to 70 m/min.

Automatic Hydraulic Bandsaw offers cutting speeds to 70 m/min.

Equipped with numerically controlled material feed and 2-speed motor with 1.1/1.5 kW of power, KASTOpractical A2 pivot-type machine delivers cutting speeds up to 35 or 70 m/min, depending on material and feed. Saw head can be indexed 45° to left or up to 60° to right, regardless of whether solid, tubular, or profile stock is being processed. Operating range for straight cuts is 230 mm round,...

Read More »
Automatic Cutoff Saws come in upcut and horizontal models.

Automatic Cutoff Saws come in upcut and horizontal models.

Suited for aluminum and other non-ferrous metals, PMI-455 Series CE NC Automatic High Production Cutoff Saws have hydraulically driven saw blade feed for maximum saw blade stability. Worktable moves 2 mm forward and backward after cut is complete and saw blade is retracting to ensure smooth finish. To prevent distortion of thin wall profiles, saws feature pneumatic clamping system with adjustable...

Read More »

Automatic Band Saw features software-programmable operation.

Danobat iDS 5A comes with Intellicut Software, which- stores material speed and feed information. Once these are set, operator only needs to select material grade and type of saw blade to automatically achieve proper blade speed and production parameters. This- eliminates errors while promoting productivity. Designed- for torsion-free travel, saw employs 15.5 hp- motor and offers cutting...

Read More »

All Topics