Mitering Bandsaw offers full automatic production operation.

Mitering Bandsaw offers full automatic production operation.

Designed for production of structural, solid, and difficult materials, Model H6A-NC is fully programmable to enable serial cutting of various lengths, sizes, blade speeds, and quantities. Material feeder is controlled by variable speed inverter drive motor that turns roller ball screw and ball nut with recirculating ball bearings. Equipped with 1-¼ in. x 17 ft 5 in. blade operating at 60-360...

Read More »
Double Column Bandsaw features automated controls.

Double Column Bandsaw features automated controls.

Equipped with 5 hp 3-phase motor and 1-¼ in. blade, Model XT320 A-NC provides blade speeds from 60-360 fpm and feeder vise stroke of 78 in. Saw can cut up to 12 in. round material and up to 12 x 13 in. rectangular shapes. Machine's control features automatic material sensor to detect cutoff point and material height. Double arch frame dampens vibration, while carbide blade guides run in large...

Read More »
DoALL Sawing Products Introduces New StructurALL Family of Band Saws

DoALL Sawing Products Introduces New StructurALL Family of Band Saws

(Wheeling, Ill.) -DoALL Sawing Products, a division of DoALL Company, introduced the new StructurALL series of band saw machines during Fabtech 2009 at McCormick Place in Chicago, IL. This new family of machines is ideally suited for cutting all types of structural materials. All machines in the StructurALL family incorporate swiveling scissor-head designs for ease of miter cutting. Some of the...

Read More »
Bandsaws cut large and tough materials.

Bandsaws cut large and tough materials.

Comprised of automatic and semi-automatic versions, HBP Series accurately cuts solid forgings, slabs, profiles, molds, or bundled materials up to 82.6 in. in diameter. Each is constructed with cast iron frame and twin-column parallel down feed design. Along with 3 in. wide bandsaw blades, machines feature frequency-controlled 20.1 hp main drive motors with 27-275 surface feet per minute standard...

Read More »
Plate Saws balance productivity and precision.

Plate Saws balance productivity and precision.

Nishijimax NHC-850SQA and NHC-8310SQA, respectively designed for traverse sawing of plate and for sawing longitudinally, are fully automatic via programmable CNC. Saw spindle drive system results in 15-115 rpm blade speeds, and 21 hp induction motor drives saw blade spindle via reduction gearbox, which is controlled by FREQROL Inverter Drive. While NHC-850SQA can saw plate up to 3 in. thick and...

Read More »
CNC Carbide Cutoff System offers 9 in. bar stock capacity.

CNC Carbide Cutoff System offers 9 in. bar stock capacity.

Utilizing 25-70 rpm saw spindle drive system, Nishijimax NHC-230 can saw 9 in. round 1045 bar stock in 50 seconds and provide surface finishes from 40-80 RMS. System's 51 hp induction motor drives saw blade spindle via reduction gearbox. In addition to ensuring that precise feed rate is set automatically, NC saw spindle feed axis maintains input chip load. Saw blade feed rate is controlled via AC...

Read More »
Bandsaw promotes efficient, precision cutting of aluminum.

Bandsaw promotes efficient, precision cutting of aluminum.

Utilizing bi-metal or carbide-tipped saw blades, HBM 540A/ALU Bandsaw cuts aluminum profiles and solids. Heavy-duty machine, constructed with cast iron bow frame which travels on 3 sets of vertical linear ways and guides for stability, can cut rounds up to 21.2 in. dia and rectangular shapes up to 24.8 x 21.2 in. It incorporates frequency-controlled, 29.5 hp main drive motor with 984-4,264 sfm...

Read More »

Kalamazoo Industries Model K12-14MS Manual Metallurgical Saw Eliminates Abrasive Particle Dispersion

Kalamazoo Industries Model K12-14MS Manual Metallurgical Saw features an enclosed wet cutting area with dual coolant nozzles to effectively eliminate the dispersion of abrasive particles into the workplace. The saw has a 14-inch abrasive wheel, a 5 HP, 3 phase , 1725 RPM TEFC motor, dual moveable 4 screw vises and a 24V halogen light inside the enclosure. Designed for external manual operation,...

Read More »
Manual Cold Saw features solid hinge-type design.

Manual Cold Saw features solid hinge-type design.

Model C315/350 manual cold saw incorporates double vise assembly, with 6-¼ in. maximum opening, that provides holding power on both sides of cut for burr-free operation. Saw includes 14 in. HSS blade; 3.5 hp, 3-phase TEFC motor; 2-speed spindle; totally enclosed transmission; 24 V controls; and built-in flood coolant. It can cut round shapes with up to 4/3-¾ in. dia at 90-

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics