A Versatile and Economic Choice

A Versatile and Economic Choice

The multi-purpose Band Saws from Dayton effectively cut through a wide variety of ferrous and non-ferrous metals, composites, plastics and wood. They can be used for resawing, contouring and straight and bevel cutting. The #4HEW3 (12-inch floor) and #4HEW4 (20-inch floor) models have a built-in chip chute, paddle On/Off switch, speed reducer and precision blade guides. The #6Y002 (15-inch floor)...

Read More »
Bandsaws cut large diameter tubing.

Bandsaws cut large diameter tubing.

In addition to cutting solid bars and structurals up to 31.5 in., HBP-800AXL Automatic and HBP-800XL Semi-Automatic Bandsaws cut tubes up to 39 in. in diameter. Both feature cast iron frame construction and twin column parallel down feed design for proper saw blade tensioning. Controlled by PLC, saws are equipped with 14.7 hp main drive motor with variable speed range of 55-393 sfm, hydraulic and...

Read More »
Kalamazoo Industries Introduces the Model K30PH 30-Inch Abrasive Saw

Kalamazoo Industries Introduces the Model K30PH 30-Inch Abrasive Saw

Kalamazoo Industries has introduced the new Model K30PH 30-inch abrasive saw. The saw features air/oil power down feed, a massive 25 HP, 3 phase 220/440V motor with magnetic starter and a 1-3/4-inch arbor with sealed ball bearings. The saw measures 36 L x 24 W x 84 H and has a capacity of up to 5-inch solids and 8-inch shapes. Options include a totally enclosed hydraulic down feed, stock...

Read More »

Twin Post Band Saw Machine cuts specialty steels.

Combining rigid construction, 10 hp blade drive, and 1.5 in. blade, Spartan PA460-HD includes vibration dampening system that helps minimize noise levels and extend blade life for cutting materials such as tool steel and stainless. Machine vise has split front jaw design that holds material securely on both sides of cut, while automatic bar feed vise minimizes remnant lengths to as little as 3...

Read More »
Cordless Reciprocating Saw features one-handed design.

Cordless Reciprocating Saw features one-handed design.

Hackzall-® M18(TM) Cordless One-Handed Recip Saw, Model 2625-20, enables users to make clean, accurate cuts while working overhead and in tight spaces. Its dual anti-vibration system allows for low vibration levels during 18 V operation. Delivering 0-3,000 strokes/min, motor offers -¾ in. stroke length that cuts through range of materials such as wood, metal, and PVC. Compact, battery-operated...

Read More »
Reciprocating Saws are 19 in. long and weigh 7.3 lb.

Reciprocating Saws are 19 in. long and weigh 7.3 lb.

Powered by 12 A motor, SAWZALL-® Recip Saw Model 6509-31 features 3/4 in. stroke length to provide control in tight areas, while Model 6519-31 has 1 1/8 in. stroke length for more aggressive cuts in heavy demolition. Both feature gear protecting clutch that extends gear and motor life by absorbing high impact forces and Quik-Lok-® blade clamp for tool-free blade changes. Delivering 0-3,000 spm,...

Read More »
Hand Saw features rubber comfort grip.

Hand Saw features rubber comfort grip.

Eliminating need for separate rasping and reaming tools, Rasping Jab saw utilizes grating holes along side of blade to rapidly expand holes or smooth rough edges of sheetrock after cut has been made. It features 6 in. plaster/drywall blade that is resistant to bending or breaking.

Read More »
Kalamazoo Industries Introduces the Model K10WBT Enclosed Wet Benchtop Saw

Kalamazoo Industries Introduces the Model K10WBT Enclosed Wet Benchtop Saw

The new Kalamazoo Industries Model K10WBT enclosed wet cutting benchtop abrasive saw offers economical manual operation, with a capacity of up to 1-1/2-inch solids and 2-1/5-inch pipe. The saw features a magnetic switch, an internal work light, dual 3-inch vises, dual coolant nozzles with coolant and pump, T-Slot Table, a 2HP 3 phase, 220/440 volt TEFC motor running at 3450 RPM at the spindle,...

Read More »

All Topics