New Power Supplies Products

Dual Output DC-DC Converters operate from -40 to 85 deg C.

NKA Series 1 W converters are supplied in sub-miniature, 14-pin DIP packages and are available for 3.3, 5, and 12 V input voltages. Output voltage options of 12 and 15 V are offered for 3.3 V input model, while 5V and 12 V input parts can be supplied with voltage options of 5, 9, 12, and 15 V. Galvanic isolation of 3 kVdc reduces switching noise. Internal SMD construction uses multilayer ceramic...

Desktop Power Supplies are CE-compliant.

Series PW117 6 to 12 W universal switch-mode power supplies are available in 9 models ranging from 3 to 48 V with input voltage of 100 to 240 Vac. Configurations include: IEC320-C14 (with ground) and IEC320-C8 (no ground). Each model complies with EMI/RFI regulations. Units measure 3.35 in. long x 1.81 in. wide x 1.30 in. high. Applications include DSL/cable modems, network hubs, print servers,...

Uninterruptible Power Supply can be field upgraded.

Hot-swappable S5K modular UPS allows users to increase ratings from 4 to 16 kVA, boost run-times, and add N+x parallel redundancy. Applications include data handling systems, network servers, enterprise telecommunications systems, LAN gateways, and RAID arrays. Each modular component, including 4kVA power modules, battery modules, and system control modules, are hot-swappable, so changes can be...

Switching Power Supplies range from 5 to 30 watts.

Economod PCB mount modular power supplies offer single, dual, or triple outputs and universal input range from 85 to 265 Vac with 47 to 440 Hz. Single outputs are 5, 12, 15, and 24 Vdc. Dual outputs are Ã-

How to Reduce Costs for Plastic Caps, Closures and Other Packaging Products

Check out this white paper to read about the six questions to consider before selecting an injection molder for your packaging application.

Power Supplies meet FCC and EN Class B standards.

RKW 1500 Watt series single output, low noise power supplies provide 3.3 to 48 Vdc outputs from 85 to 264 Vac with power factor correction. Conducted and radiated emissions are suppressed to meet FCC Class B, VCCI Class B, EN 55011-B and EN 5022-B limits with external ac filter. Without filter, supplies meet Class A standards. Supplies have remote on-off voltage control and current balance...

Welding Inverter communicates internally via DeviceNET(TM).

PC- and PDA/Palm(TM)-compatible Auto Invision(TM) 6500 power supply automatically identifies robots and calibrates appropriately. DC welding output varies from 5 to 1170 A with 100 percent duty cycle rating of 675 A, 44 V. It performs MIG, pulsed MIG, adaptive pulsed MIG, and flux cored welding for robotic and fixed automation systems. Unit offers 1/4-turn, quick connector, Auto-Line(TM)...

Stick/TIG Inverter provides simple operation.

CST(TM) 250, produces 250 amps at 50% duty cycle and weighs just 40 lb. CST Rack with four CST 250 inverters weighs 328 lb. Operator interface includes On/Off switch, amperage control knob, infinitely adjustable from 5 to 250 amps, and process select switch that eliminates setting errors. Receptacle, on front of machine, permits remote amperage control when Stick or TIG welding. Inverter accepts...

DC/DC Converters have synchronous rectifier design.

Half-brick EXB100 100 W modules, available with single outputs, include: 5 V model rated at 20 A; and 3.3 V and 1.8 V models rated at 30A. The 1.8 V model can be trimmed down to just 1.08 V, yet still deliver full 30 A rated output. Input voltages range from 36 to 75 Vdc, with 1500 Vdc isolation rating. Converters include remote on/off facility, and are protected against over-voltage,...

DC/DC Converters provide 75 watt triple output.

HE Series converters are packaged in 1/2 brick case and provide 3 regulated DC outputs. Input ranges are 18 to 36 Vdc and 36 to 75 Vdc. Primary output voltages are 3.3 V at 20 A or 5 V at 15 A, and auxiliary outputs are +/-12 or +/-15 V at 2A. Units include isolation voltage of 1544 Vdc from input to output, switching frequency of 430 KHz, and thermal shutdown with auto restart for fail safe...

DC/DC Converters provide efficiencies above 90%.

V7PC-04C Series non-isolated boost DC/DC converters provide 5 V power from 3.3 V source. They operate over 3.0 to 4.0 V input range, while providing maximum output current of 4 A. Available with or without remote on/off feature, step-up units allow operation to 70 deg C with no derating. Converters feature single-in-line package, fixed-frequency operation, and overvoltage and short circuit...

Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor

As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.