New Power Supplies Products

DC/DC Converters suit board-level applications.

CostCutter converters are available in SIP/DIP and modular packages, providing output power over range of 0.75 to 60 watts. Units accept single-range and 2:1 range inputs from 4.5 to 72 Vdc, which provide single and dual outputs from 3.3 to 15 Vdc. All models contain short circuit protection and internal input filter. CostCutter Series will operate over ambient temperature range of -25 to +71Ã-

DC/DC converter needs no heat sink.

Quarter-brick sized DualQor(TM) is capable of delivering up to 40 W of total output power at 3.3V and 2.5V. It employs synchronous rectification to achieve efficiencies up to 87%. Converter has 48V nominal input and meets input voltage transient requirements up to 100V for l00 msec. Unit has industry-standard footprint of 1.45 x 2.3 in. with profile of 0.43 in., and industry recognized pin out...

DC-AC Inverter powers 10.4 in. to 15 in. LCDs.

LD Series Inverter is designed to power LCDs that are backlit by 2 to 4 cold cathode fluorescent lamps or CCF tubes. Powered by regulated 12 Vdc source, inverter has up to 10 watts of output power, with integrated connectors. Wide dimming range is achieved by on-board PWM dimming controlled by analog voltage signal. Inverter measures 6.15 in. long x 1.03 in. wide and has operating temperature...

DC Linear Power Supplies offer current limiting adjustment.

AX500 Series digital DC linear power supplies are designed around toroidal transformers, and will operate continuously at full rated output. 3 models are available providing single (AX501), dual (AX502), and triple (AX503) output capabilities. Model AX501 offers 0-30 Vdc supply, while Models AX502 and AX503 each offer dual 30V outputs. AX503 also has 5 Vdc output adjustable from 2.7 to 5.5V. All...

Inventory Management Services

This white paper provides an overview into the benefits, approaches and considerations for inventory management services.

DC/DC Converters feature isolated output.

5E Series offers input voltage ranges of 9-18, 18-36, and 36-72 Vdc. Units are available with single, dual, and triple low rippled regulated outputs. CMOS/TTL compatible remote On/Off control allows converter output to be turned on or off as necessary. 25/30 watt converters feature continuous short circuit protection and do not require heat sink. They have 6-sided shielding and can achieve...

DC/DC Converters accept wide range of dc inputs.

WD Series 10W dual output dc/dc converters have 4:1 dc input range to accommodate 12 V battery, 24Vdc industrial, and 48V telecom power sources. 3 models have input range from 9-36 Vdc, and 3 models have 18-72 Vdc input range. Outputs are Ã-

Welding Products include power sources, drives, and feeders.

CST(TM) 250 Stick/TIG power source provides 250 A for stick and TIG welding. CST Rack for multiple operators can hold up to 4 welding units. Bobcat(TM) 250 NT engine driven welding generator's rated output in CC/DC/AC mode is 250 A at 25 V, 100% duty cycle. 70 Series constant-speed wire feeders are available in bench-top, boom-mounted, and single- and dual-wire configurations.

Frequency Converter transforms single phase to three phase.

Compact BL3X350 delivers 350 VA per phase of clean, regulated 3-phase ac power from single phase input. Digitally controlled waveform produces clean power while protection circuitry provides for voltage fold back during overloads to maintain undistorted waveforms. Switch selectable, single phase input accepts 115 or 230 Vac at 47-440Hz, so it can accept any worldwide, shipboard or aircraft single...

Power Supply modules provide 3000 VAC isolation.

M-Series miniature modular AC/DC switching power supplies are available with 5W to 30W output power ranges. All models accept universal input over range of 85-265 VAC or 100-340 VDC, and provide single/dual/triple outputs from 3.3 to 24 VDC. With UL/CSA/TUV/CE approvals, units offer integral power-good LED indicators, output adjustment potentiometers, and are fully encapsulated. Operating...

DC/DC Converter works in low power applications.

QML series isolated dc/dc converter can deliver up to 15 A total output current at 3.3V and below and up to 75W at 5V and above without need for attached heatsink. It uses synchronous rectification, resulting in no derating of output power up to 70 degrees C. Converter employs industry standard quarter-brick footprint and pin out, measures 1.45 x 2.3 in., and has low profile of 8.5mm. Functions...

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.