New Power Supplies Products

LED Power Supplies are designed for lighting applications.

Xitanium(TM) LED drivers are rated for 50,000 hr life. Since they are UL Class 2 and FCC Class B rated, they can be used virtually anywhere, with no special wiring routing requirements. Drivers can operate as low as -40 deg C and have 90 deg C case temperature rating. Xitanium Series includes 120 V, constant output current drivers for 12 W (350 mA), 17 W, (700 mA), 25 W (1050 mA), and 40 W (1750...

Power Supplies provide 24 Vdc.

Cutler-Hammer IT models operate from 100 to 480 V at 1 to 40 A. Power supplies offer high outrush capacity of more than five times steady state current to close dc contactors and provide power for starting up communication networks and large capacity systems. Long ride through capabilities keep power flowing after voltage has dropped and allows power supplies to ride through power dips and...

Uninterruptible Power Supplies protect networking equipment.

Pulsar Evolution Models 1500VA to 3000VA meet needs of security equipment and network and storage servers. Model 1500VA is only 1.73 in. (1U) high. Line-interactive models keep equipment running for at least 4 hr. For longer backup times, external battery modules can be added to Models 2200 and 3000, while Model 3000XL allows up to 12 battery module extensions. Local or remote network power...

Switching Power Supplies provide 25 to 320 watts output.

A Series enclosed AD/DC power supplies accept universal input from 85 to 265 Vac. Models provide single/dual/triple/quad outputs from 5 to 48 Vdc. All have soft-start circuitry, integral EMI filtering, power-good LED indicator, and output adjustment potentiometer. Units operate over ambient temperature range of -10 to 60 deg C, and include overvoltage and short circuit protection.

Taking a New Product to Market: Outsourcing vs. Internal Product Development

To learn if outsourced new product development (NPD) is right for your needs, and how companies like Vollrath Manufacturing Services can help, download this white paper now.

Linear AC Power Sources provide 500 VA to 12 kVA.

Low distortion AMX Series produces single-phase, split-phase, or 3-phase power. Select models may be connected in parallel to provide up to 30 kVA. Units combine broad, 50 kHz small-signal bandwidth with peak to RMS current ratio of 4-6:1. They feature continuous self-calibration and programmable output impedance. AMX Series can be configured with manual or programmable controllers.

DC-DC Converters provide single output with >85% efficiency.

TCPDC Series 600 watt converters have input voltages of 22 to 32 and 42 to 56 Vdc, and outputs of 5, 12, 24, and 48 V up to 600 W. Units are over load, over voltage, and over temperature protected. They include remote turn-on/turn-off and DC-operated ball bearing fan. Operating temperature range is 0 to 55 deg C. Hot swap/rack mount options are available. Applications include telecommunications,...

Digital DC Power Supply has adjustable limit controls.

Model 1761 utilizes 115 Vac outlet as its power source. Bench top unit provides accuracy of dual 4-digit LED resolution, 2 variable voltage outputs (00.00 Vac to 35.00 Vdc and 0.000 to 3.000 A), and one variable 2 to 6.5 Vdc, 5 A output. Front panel indicators and controls include Overload Indicator Light, Voltage Adjustment Knob, and current limit controls. Voltage meter resolution is 00.00 to...

DC/DC Converters employ 300 kHz frequency, buck topology.

LSN D3 Series SIPs are non-isolated DC/DC converters that accept 3.3 V inputs (3.0 to 3.6 V input range) and deliver 1, 1.2, 1.5, 1.8, 2, or 2.5 V outputs rated at 10 A. They employ single-in-line (SIP) packages that measure 2 x 0.55 x 0.34 in., and may be configured in vertical or horizontal orientations. Converters facilitate true point-of-use (point-of-load) power processing. Their on-board...

Alternator provides power for stick welding.

Power-Plus(R) Exciter(TM) TA-6/200-KBC provides 5.5 kVA of 115/230 Vac auxiliary power, 200 dc amps @ 60% duty-cycle welding output, and 12/24 V battery charger. Separate windings are used for welding and auxiliary power. Generator is powered by 15 hp, 1-cylinder, gas fueled, air-cooled engine. Alternator provides smooth weld output for STICK or scratch-start dc TIG welding applications. It fits...

Portable DC Inverter offers constant-current output.

Single-phase, 230/460 Vac, 50/60 Hz P-Wee(R) 250 GTS power source is designed for STICK, high frequency TIG, and Lift Start TIG welding applications. It includes adjustable hot start and automatically adjusts arc control for smooth operation with all electrodes. Standard controls include gas valve, built-in sloper, spot timer, pulser, and high-frequency starting. Fixed preflow is provided and...

560 and 572 Series IP67 Waterproof Inline Plug and Socket Connectors with Shock and Vibration Resistance

EDAC's new line of IP67 waterproof plug and socket connectors represent the cutting edge of waterproof connection technology. Part of the 560 and 572 series of connectors, they utilize innovative design concepts to deliver a level of performance and value that is unmatched in the industry. See our video to learn more.