New Power Supplies Products

Step-Down Converters target mobile electronic devices.

Available in 2.0 x 2.1 mm SC70JW-8 package, 1 MHz Models AAT1123 and AAT1143 supply 600 mA and 400 mA max output current, respectively, while maintaining low 25 Ã-µA no load quiescent current. Both units support input voltage range of 2.7-5.5 V and output as low as 0.6 V. Devices are available in fixed version with internal feedback or programmable version with external feedback resistor....

DC-DC Converter uses open standard communications protocol.

With input range of 4.5-13.8 V, PMBus-compliant 20 A Model DPL20C offers programmable output voltage from 0.6-5.5 V as well as programmable sequencing, tracking, and margining. Non-isolated, POL converter offers real-time monitoring of voltage, current, and temperature, with automatic warning of fault conditions. It stores all configuration and set-up data in non-volatile memory, and powers-up...

Miniature DC/DC Converter suits motor control applications.

Delivering up to 85% efficiency, DCP010507DB meets UL1950 specifications with 1 kVrms isolation and EN55022 Class B EMC performance. This 1 W isolated, unregulated dc/dc converter operates from 5 V input and features dual Ã-

UPS Systems offer automatic voltage regulation.

Featuring 8 and 12 outlets respectively, Models AVR550U and AVR750U protect home and office equipment from low and high voltage conditions and line noise without draining battery power. They offer up to 750 VA battery backup, USB communication port, and telephone/modem/DSL line surge protection. Software provides unattended system shutdown and automatic file saving in event of power outage.

A Guide to Robotic Cells in Automation: Electronics & Auto Parts

This white paper provides an overview into robotic cells in automation electronics and auto parts.

Switch Mode Power Supply has semi-customizable design.

Offered in 46,000+ possible output configurations, A2000 series configurable AC-DC power supplies employ modular construction and feature up to 12 isolated and adjustable outputs with total power up to 2,000 W. Products, supplied in 2U-high, 19 in. rack-mount package, provide regulated single or multi-output DC supplies from universal mains supply of 90-253 Vac. Additional features include zero...

Regulated DC-DC Converters offer single or dual outputs.

Housed in SIP package measuring 0.86 x 0.36 x .044 in., LANEW Series provides 2:1 input ranges of 4.5-9, 9-18, 18-36, or 36-75 V and delivers outputs of 3.3, 5, 9, 12, or 15 V. Converters include remote on/off, Ã-

Step-Up DC-DC Converter suits battery-powered applications.

Manufactured in 6-pin SOT23 package, AS1320 features fully integrated synchronous rectifier that eliminates need for external transistors. Unit operates from 1.5-3.5 V supply voltage and draws less than 1 Ã-µA in shutdown mode, which enables input battery to be used as backup or real-time clock supply when converter is off. Product, capable of delivering 200 mA output current at 3.3 V fixed...

Fieldbus System powers 16 devices in hazardous environments.

Suited for DCS installations, ROUTE-MASTER(TM) Series 100 System features intrinsically-safe, isolated power supply with 350 mA per segment, which can drive up to 16 devices over cable segments up to 1,900 m long. Product utilizes split architecture design with device coupler mounted close to group of devices anywhere in Class I Division 1 Group C or D environments. Able to power FOUNDATION...

Modular Power System provides up to 1,200 W.

Multiple output, programmable dc power supply system, Model N6700 accommodates 1-4 modules in 1U package and is available with 20 modules ranging in power from 50-300 W. Test system integrators can mix and match any modules to create dc power system of 1-4 outputs totaling 400, 600, or 1,200 W. Power management feature allows user to allocate mainframe power to outputs where it is needed, while...

Power Supplies facilitate safe PCB design.

Featuring mini-IEC input connector and detachable line cord for AC power input, AC/DC Power Converters eliminate exposed high-voltage electrical connections from PCB. With full-load operating temperature of -40 to +70Ã-

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.