New Power Supplies Products

DC to DC Converter suits xDSL applications.

Model ASDH-0305 isolated 7 W converter is fully approved for EN60950 and UL1950 SELV safety standards. Input range is 36-130 Vdc with dual outputs of 5 Vdc at 1.1 A and 3.3 Vdc at 0.3 A. Open-frame construction with integral finned heatsink permits operation from -40 to +85Ã-

Power Supplies are geared for arc welding.

Inverter arc welding power supplies for portable STICK, TIG, and MULTI-PROCESS construction and maintenance welding duties include nine models that range in weight from 19-63 lb. Units include Voltage Reduction Device to reduce OCV when power supply is not in use. Push button control panel with digital meter is weather protected for construction and maintenance environments while cases are...

DC/DC Converter suits xDSL applications.

Open-frame, isolated 7W Model ASDH-WS12 is fully approved for EN60950 and UL1950 SELV safety standards. It offers input range of 36-130 Vdc and provides single output of 12 Vdc at 0.5 A, nominal. Integral, finned heatsink permits operation over temperature range of -40 to +85Ã-

Power Supplies suit harsh military applications.

TTX Series single-slot power supplies are 24 V DC input units that include 350 W, 3U model and 700 W, 6U model. They support input range of 18-36 V and provide outputs of 5, 3.3, and Ã-

Finding the Right Bore Configuration for your Application

There are multiple things to consider when choosing a bore configuration for your application. Check out this e-book to learn more!

UPS and Maintenance Bypass provide rack-mounted protection.

UPStationÃ-® GXT5000R-208 208 V, 5 kVA UPS delivers scalable power protection in 3U electronics and 3U-battery modules. Double-conversion, on-line technology provides sine-wave output and zero transfer time, ensuring load is supported by seamless flow of power from UPS if utility power is interrupted. MicroPOD(TM) allows users to manually transfer connected equipment to utility power via...

Power Supplies suit DeviceNet(TM) applications.

Rated 24 Vdc, DIN-rail units provide short-circuit, over-voltage, and over-temperature protection. Front panels offer multiple connection terminations. Model SDN4-24-100 meets UL1950 limited power source requirements; Model SDN8-24-100REDA offers built-in isolation diode, DC Okay Signal, and pluggable, screw-terminal connections; and Model SDP4-24-100 provides 4.2 A current. Products meet ODVA...

Switching Power Supplies include 50 W models.

RKW Series single-output, low profile power supplies conform to EN 60950 for Low Voltage Directive and meet EN 55011-B and EN 55022-B standards for Conducted and Radiated Emissions. Products comply with EN 61003-2 via active PFC (Power Factor Correction) circuit. Model RKW 24-2.2K, with 24 V output, has 6.2 A short-circuit current capability, suitable for motor-drive applications. DIN-rail...

Converter provides low voltage inputs for ASICs and DSPs.

Model WPA60 DC-DC converter meets EN60950, UL60950, and CSA safety requirements. Two independently regulated outputs deliver 1.8 and 3.3 V, respectively, and provide full regulation down to zero load. Power can be traded between outputs up to 60 W. Input voltage range is 36 to 75 V and includes input and output filtering. Using fixed switching frequency of 350 kHz, WPA60 operates at 90%...

DC/DC Converters feature high-voltage isolation.

With efficiencies up to 82%, V3 Series 2 W converters are supplied in subminiature SIP and DIP packages with isolation voltages or 1,000 or 3,000 Vdc. Input voltages include 5, 12, 24, and 48 Vdc, while single-output voltages range from 3.3-24 Vdc. All isolated outputs are regulated, and no heat sinks are required. Operating temperature range is -40 to +85 Ã-

Point-of-Load Converter provides all-in-one power solution.

Dual-output, non-isolated, point-of-load (POL) converter for DDR (double data rate) memory, DDR12, enables 2.5 V VDDQ supply for DDR logic and 1.25 V DDR termination voltage (VTT) to be derived from single module. Unit employs synchronous rectification techniques and has 85% conversion efficiency when operated at half-load or greater. The 2.5 V VDDQ output delivers up to 25 A, and 1.25 V VTT...

560 and 572 Series IP67 Waterproof Inline Plug and Socket Connectors with Shock and Vibration Resistance

EDAC's new line of IP67 waterproof plug and socket connectors represent the cutting edge of waterproof connection technology. Part of the 560 and 572 series of connectors, they utilize innovative design concepts to deliver a level of performance and value that is unmatched in the industry. See our video to learn more.