New Power Supplies Products

Power Supply operates at full loads to 60-

Model R65 65 W single output power supply unit features universal autoranging input voltage of 90-265 Vac. Five models are available with output ratings ranging from 5-48 V, with continous output power of 65 W, and currents from 1.35-12 A. Short circuit protection, 1% Vp-p at max load, and +1% line and load regulation are included. Power supply provides full compliance to industrial and...

Power Supply does not require forced air cooling.

Series RKW 30 W power supply operates at full power in ambient temperatures from -10 to +50Ã-

Boost Converter ensures accurate LED driving.

When used with high-efficiency switching transistor, voltage-mode ZXSC400 enables current in LED chain to be accurately set and monitored by one resistor. Across full supply range of Lithium-ion cell, converter's load and line regulation results in LED current typically changed by less than 1%. Supply voltage range of 1.8-8 V allows use with portable batteries. Converter, in S0T23-6 package,...

DC/DC Converter is offered in SIP package.

Non-isolated NiQorÃ-® series, with on-board input and output filtering, eliminates need for I/O capacitors. Point-of-load converter series has 3.0-3.6 V input range and delivers up to 15 A of current at 2.5, 1.8, 1.5, 1.2, and 0.9 V. Unit measures 2.0 x 0.55 x 0.335 in. and can be configured in vertical or horizontal orientations. Module employs synchronous rectification to achieve...

Industrywide Applications for Deep Drawn Metal Stamping

Deep-drawn metal stamping applies a significant punching force to radically draw metal sheets into a die cavity. Finished components produced by this process tend to have a depth that exceeds their diameter, which is why manufacturers refer to it as "deep-drawn" metal stamping.

DC/DC Converters offer vertical and horizontal configurations.

Series LSN D5 non-isolated DC/DC converters accept 5 V inputs and deliver 1, 1.2, 1.5, 1.8, 2, 2.5, and 3.3 V outputs, fully rated at 10 A. Plug-and-play units come in single-in-line packages with standard pinout. They are designed with on-board input/output caps fully rated to handle required input ripple current and are capable of reducing output noise to specified levels. Power density is...

Power Distribution Unit has 1U design.

Model 852Q2J22 Interpower(TM) 19 in. rack-mount unit provides domestic and international 1-phase power to equipment racks. It offers 10 individually switched IEC 60320 Sheet F outlets and one C20 inlet. Rated at 16 A for service at 250 Vac, unit comes with lighted rocker circuit breaker and is UL recognized, CSA certified, and TUV approved with CE mark. Various cordsets are available for...

DC/DC Converters offer 4 to 1 input voltage ranges.

Series UHE 25-30 W converters include Model Q12 with input range of 9-36 V, and Model Q48 with input range of 18-75 V. They come in 1.6 x 2 x 0.4 in. encapsulated plastic package, and feature 1500 Vdc isolation, efficiencies as high as 90% and I/O protection. Output voltages and currents include 3.3 V @ 7.5 A, 5 V @ 5 A, 12 V @ 2.5 A, and 15 V @ 2 A. Units are UL/EN/IEC60950 certified and suited...

DC/DC Converters deliver up to 60 A output current.

Single-output ALQ Series converters, with quarter-brick configuration, measure 0.38 in. high and offer open-frame construction suited to Distributed Power Architecture (DPA) applications. Operating from input voltage range of 36-75 V, ALQ models are available with 3.3, 2.5, 1.8, and 1.2 V output voltages. Devices feature clean monotonic output startup characteristic and -40 to +185Ã-

High-Power Switcher offers up to 18 outputs.

Modular VS Series includes 6-slot cases with total output up to 2,500 W. Using 1- or 3-phase AC input from 84 or 180 V to 264 Vac, series can be configured with up to 18 DC outputs ranging from 2-48 V and can contain up to 6 power factor controlled output modules in 5.0 x 10.8 x 11 in. case. Offerings include current sharing, remote sensing, overload protection, voltage adjustment, margining, and...

Diode Driver provides pulsed/QCW and CW outputs.

Benchtop PCX-7410 diode driver/current source delivers current pulses variable from 10 mA to 10 A, pulse widths variable from 50 nsec to 500 msec with rise times

DoorKing's 1601 Lane Barrier Provides a Higher Level of Traffic Control for Less

DoorKing is proud to introduce an easy add-on to its 1601 Barrier Gate Operator: The 1601 Traffic Lane Barrier. The barrier gate provides greater traffic control while eliminating the need for bollards or crash beams. Check out this video to learn more.