New Power Supplies Products

Pulsed Power Source suits orbital pipe welding.

Model MPS-4000 microprocessor-based, portable inverter power source is designed for GMAW/FCAW process welding applications. Integral weld Head controller operates all Pipeliner weld Head models. Power source provides synergic control of electrode speed and power output. Factory-developed programs are stored for many combinations of alloy, electrode diameter, and shielding gas. Model MPS-4000 is...

Lamp Drivers provide lighting for PDAs and signage.

Model D305 is capable of driving electroluminescent (EL) lamps as large as 100 cmÃ-² with high voltage AC output from 2.5 to 7.0 Vdc supply voltage. It is available in MSOP-10 package in tape and reel. Model D306A can convert 2.0 to 16.0 Vdc supply input to up to 400 V peak-to-peak AC signal that can drive EL lamps as large as 180 cmÃ-². It is available in surface-mount SOIC-16 with heat...

Power Supply features digital display.

Model 30354-91 is a 110/220 Vac, 50/60 Hz power supply measuring 8 x 4.75 x 9 in. It provides triple outputs including 0-30 V, 0-3 A (adjustable) and 5 V and 12 V (fixed). Independent 5 and 12 V outputs provide power for TTL and CMOS projects. Unit includes overload and short circuit protection with constant voltage or current. Current limiting front panel LED indicator and binding posts for...

Converter offers low profile with standard pin out.

PowerQorÃ-® Mega series eighth-brick sized isolated dc/dc converter delivers up to 15 A total output current at 3.3 V and below and 50 W at 5 V and above, without heatsink. The EML series has 48 V nominal input (35-75 V range) and meets input voltage transient requirements up to 100 V for 100 msec. Unit measures 0.9 x 2.3 x 0.37 in., occupies 60% of board space of standard quarter-brick, and...

A Guide to Custom Water Manifold Assemblies

This white paper provides a guide to custom water manifold assemblies.

Power Switcher provides wide-range adjustability.

Model LPQ142, with active power-factor correction, offers user adjustability on 3 of its 4 output voltages, one with range of Ã-

Power Supply provides active power-factor correction.

Enclosed Series SP provides output power from 75 to 500 W. All models accept universal input from 85 to 265 Vac and 50 models provide single outputs from 3.3 to 48 Vdc. Switching power supply has soft-start circuitry, EMI filtering, power-good LED indicator, and output-adjustment potentiometer. It operates over ambient temperature of -10 to +50Ã-

DC-DC Converter extends battery life in portable applications.

Inductorless, 100 mA FAN5660 converter achieves over 90% efficiency at full load with typical operating current of 120 Ã-µA. It inverts +l.5 V to +5.5 V input to corresponding -l.5 V to -5.5 V output. Unit can also split or double full load, +5.0V input voltage, of power supply or battery, providing +2.25 V in splitter mode and +9.5 V in doubler mode. Equipped with onboard oscillator circuit,...

Linear Power Supply features screw terminal connections.

Model CM1.5.1000 5 W power supply provides low noise 5 V output at up to 1 A. It can be powered by 100, 110, 220, 230, or 240 Vac. Unit is housed in fully encapsulated 4 x 2.7 x 1.4 in. plastic enclosure, which incorporates step down barrier strip. Model CM1.5.1000 has output voltage accuracy of Ã-

DC/DC Converters require no external components.

PTK6700 Series non-isolated 13 A DC/DC VRMS provide up to 45 W of output power. Units can accept inputs of 3.3, 5, or 12 Vdc and provide single or dual outputs that are 5-bit digitally programmable from 1.1 to 3.5 Vdc. They utilize on-board heat exchanger technology, have operating efficiencies of 92% and operate over ambient temperature range of -40 to +70Ã-

Power Supply maintains regulation under changing load.

PowerMod(TM) combines switching technology at high voltage and high power in 19 in. rack-mount unit. Suitable for manufacturing and laboratory applications, it offers up to 200 KHz switching speeds with less than 1% voltage regulation and less than 0.1% ripple. Capable of operating in constant voltage mode, constant current mode, or constant power mode, solid-state switching power supply is...

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.