New Power Supplies Products

Line Interactive UPS Units provide data line protection.

Series S2K prevents sensitive equipment from being damaged in event of surges, spikes, lightning strikes, blackouts, and other power disturbances. Automatic Voltage Regulation saves battery power for deep sag situations when input voltage is below 78 V. Units feature intelligent battery management and hot-swappable batteries that do not require shutdown for replacement. They come in 120 and 230...

Point of Load Converters have power sequencing capabilities.

Compatible with Point-of-Load Alliance standard, PTH series non-isolated DC/DC converters provide means of addressing multiple power rail requirements of latest-generation boards. All 15 models are available in through-hole and surface-mount versions and offer output voltage adjustability, on/off inhibit function, and output over-current protection with automatic recovery. They are available with...

Quarter Brick DC/DC Converter is rated to 75 W.

Potted with thermally conductive compound, QL Series utilizes aluminum baseplate that enables it to perform in still air or limited airflow environments. Utilizing synchronous rectification, unit offers efficiencies in excess of 90%. It has 2:1 input range, 18-36 or 36-75 Vdc, and output voltages are 1.5, 1.8, 2.5, 3.3, and 5 Vdc. Output noise runs down to 30 mV peak to peak, and features include...

Rack-Mountable UPS delivers double conversion technology.

UPStationÃ-® GXT2 6000 combines 6 kVA capacity and dual output voltage in 4U-sized cabinet. It converts incoming AC power to DC, and then back to AC, isolating protected equipment from incoming disturbances. Unit features dual inverter design for 240/120 or 208/120 output voltage, internal automatic and manual bypass, as well as self-diagnostics. Cabinet includes internal batteries with...

Pressure Sensor Selection Guide

This white paper provides information and a guideline for pressure sensor selection.

DC/DC Converter Modules have 18-75 Vdc input range.

Modular FEC40 Series converters provide output power of 40 W and accept 2:1 wide range inputs from 18-75 Vdc. Available in 18 models, they are offered with single, dual, and triple outputs from 3.3-15 Vdc. All models provide short circuit protection, OVP, on/off control, internal input filter, and 1,600 Vdc I/O isolation. Ambient operating temperature range is -40 to +50Ã-

Multi-Phase DC/DC Controllers support 40-120 A.

Series TPS4009x synchronous, DC/DC buck controllers manage 2, 3, or 4 phases and can operate each phase at switching frequency up to 1 MHz, resulting in ripple frequency up to 4 MHz at input and output in 4-phase applications. Single-chip, PWM devices include current sense fault protection, programmable over current protection, and individual phase current detection. They offer more than 90%...

Step-Up DC/DC Converter has Schottky diode and soft start.

Housed in 6-lead ThinSOT(TM) package, LT3461/A combines 40 V, 300 mA (ISW), low VCESAT (260 mV) switch that delivers efficiencies to 84% with onboard Schottky diode and soft-start capability. Using constant frequency and current mode architecture, it operates from 2.5-16 V input voltage. Constant switching frequency of 1.3 or 3 MHz enables low noise operation and use of ceramic capacitors and...

Switching Power Supplies output power of 40-60 W.

Series OFM 40/60 consists of 18 open-frame, modular power supplies that accept universal input from 85-265 Vac and provide single outputs of 3.3-48 Vdc. They offer power densities greater than 6 W/inÃ-³ and will operate over ambient temperature of 0-50Ã-

DC/DC Boost Converters have linear regulation functionality.

Utilizing synchronous rectifier based on PWM controller, TPS6102x family of synchronous, 1.5 A switch DC/DC boost converters provide up to 96% power conversion efficiency from input voltage range of 0.9-5.5 V. ICs can operate in down-mode with linear regulation if input voltage reaches or exceeds output voltage. Available in 10-pin, 3 x 3 mm QFN package, products have power save mode, 25 Ã-µA...

Step-Down Converters provide up to 95% power efficiency.

Series TPS6222x consists of 400 mA, synchronous DC/DC converters that support input voltage from 2.5-6 V, output voltage of 6 V down to 0.7 V, and output current up to 400 mA. They operate with fixed switching frequency of 1.25 MHz. In Power Save Mode, switching frequency is reduced and quiescent current is typically 15 Ã-µA. Converters come in 5-pin ThinSOT-23 package and are suited for...