New Power Supplies Products

DC/DC Converters are suited for ADSL applications.

Designed to meet DSL line-card application requirements, isolated DC/DC converters provide 5 outputs from nominal -48 V input (-36 to -75 V) and deliver up to 100 W over -40 to +85Ã-

DC/DC Converter features 2,250 V input-to-output isolation.

With fixed 5:1 conversion ratio, Model EUS34-096 isolated DC/DC converter is designed for powering multiple downstream, non-isolated point-of-load converters in Intermediate Bus Architecture applications. It offers 96% efficiency in 8-brick footprint and features input voltage range of 38-55 Vdc. Measuring 58.4 x 36.8 x 12.2 mm, product delivers maximum of 300 W at 48 Vdc input and minimum of 240...

Three-Phase Motor Drivers include built-in PWM circuits.

Models TPD4104K, TPD4111K, and TPD4112K drivers feature 3-phase full-bridge distribution circuit with level-shift type high-side driver and low-side driver, output IGBT, and FRD. Intended for DC brushless motors, air conditioner fans, and pump motors, 250 and 500 V single chip drivers include protective functions for overcurrent, overheating, and power supply voltage drop. Lead-free and...

Electrical-to-Optical Converter features low-profile design.

Offered in 850 nm multimode and 1,310 nm singlemode versions, single-channel Model J724 allows fast timing and logic-level signals to be transported via fiber optic levels. Packaging enables E/O transition to be located wherever convenient, and adjustable inputs are compatible with TTL, LVTTL, ECL, NIM, and most other common logic levels. Converter is intended for use with 9/125 micron singlemode...

Quick Guide to Components for Medical Furniture

When designing for a hospital environment, it is essential to consider the small components that enable your application to perform to a high level. Hospital furniture has different users, so it's not only patients you need to think about, but also caregivers.

Power Supply features user selectable output protection.

Offering user choice of hiccup or constant power protection, 30 A 3-Phase Switching Power Supply features universal auto-ranging input, which enables use with 340-550 Vac input to provide 24 Vdc output. Additional features include overload and short circuit protection, power loss alarm, front panel LED status indication, and adjustable output. Housed in fully enclosed, touch-safe enclosure, DIN...

Midspan powers wireless and WiMAX access points.

Suited for applications implementing 802.11n standard that require up to 24 W of power, POE30U Series 30 W 1-port midspan features diagnostic LEDs and outputs equipped with short circuit and overload protection. DC output voltage is 56 V with overload detection to 0.55 A, and AC input range is 90-264 Vac, with voltage rating from 100-240 Vac and AC input frequency from 47-63 Hz. Applications...

BEAR Power Supplies' AC/DC Converter Meets GR-1098 Lightning Criteria for Telecom Equipment

New tech note details results of lightning surge test for BEAR's rugged miniature switching power supply Phelps, NY- October 4, 2006- BEAR Power Supplies (www.bearpwr.com) has tested its standard 15-watt encapsulated AC/DC converter and found it to pass the high-voltage lightning surge tests as defined by the GR-1089 Standard for Telecom Equipment, Section 4.7, Lightning Criteria for Equipment...

DC-DC Converters offer switching frequencies to 1 MHz.

Incorporating Zero-Current and Zero-Voltage Switching topology, mid-power Maxi Modules include 3.3 Vout, 200 W model and 300 W models at 5, 12, 15, 24, 28, 36, and 48 Vout. Converters operate from 24 V nominal input, with input range of 18-36 V and efficiencies up to 88%. Measuring 4.6 x 2.2 x 0.5 in., units come in RoHS-compliant models and are suited for industrial or process control,...

Switching Power Supplies yield up to 200 W.

Measuring 6.81 x 3.82 x 1.50 in., VPU-S200 u-frame series accepts universal input voltage and delivers output voltages from 3.3-48 Vdc among 8 separate single-output models. RoHS-compliant products feature active power factor correction and remote on/off capabilities as well as short circuit, over current, and over voltage protection. Offering efficiencies to 81%, series is rated for operation at...

Pepperl+Fuchs' Power Hub Now Available for PROFIBUS DP and PA Networks

TWINSBURG, OH - Pepperl+Fuchs' FieldConnexÃ-® Power Hub modular power supply, the latest in fieldbus technology with an integrated DP-PA segment coupler, is now available for PROFIBUS. Power Hub is a modular power supply system that provides multiple power supplies for PROFIBUS PA devices, and is also available for FOUNDATION Fieldbus-based applications. The connection of PROFIBUS DP and PA...

Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors

Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.