New Power Supplies Products

Compact Switcher has standby and auxiliary outputs.

Suited for 1U rack installations, Model LPS128 has density of 6.7 W/inÃ-³ and delivers up to 130 W total power at 48 V. Product offers power factor correction to minimize input harmonic distortion and accepts universal input of 85-264 Vac at 47-440 Hz. Measuring 5 x 3 x 1.29 in., unit can be set up for lengthwise or crosswise airflow. Device features 12 V, Ã-½ A auxiliary output, 5 V @...

Switching Power Supplies feature 100 kw solid-state modules.

PowerMod(TM) HVPS power supplies are solid-state units, available in 100 kW increments, which can be combined to provide up to 500 kW of high voltage power from 10-150 kV and N+1 reliability. Designed for front panel or remote operation, DC power supplies feature full over-voltage and over-current protection up to +30% of preset. They provide Ã-

DC/DC Converter provides step-up and step-down regulation.

Model LT3433 current-mode DC/DC converter operates from input voltage of 4-60 V, delivering regulated outputs between 3.3-20 V and 200 kHz constant frequency operation. Burst ModeÃ-® reduces no-load quiescent current to 100 Ã-µA. Converter incorporates dual internal 500 mA switches, which seamlessly switch between step-down and step-up voltage conversion. Programmable soft-start helps...

Modular Power Supplies offer 600 to 1,200 W line ratings.

Available in 4 models, Series MP power supplies are offered in strategically sized chassis that incorporate Power Factor Corrected front-end. They deliver max power levels of 600, 800, 1,000, and 1,200 W to designated loads when operated at high line. Chassis may be configured with commercial-off-the-shelf output modules to provide output voltage combinations from 2-60 V with output current...

There's More to Plating than You Zinc!

To find out more about the seven demands you should make of your zinc plater, download now.

Power Supply offers SEMI F47 sag immunity.

Contained within space-saving, high-density package, SDN-P series power supply meets SEMI F47 Sag Immunity standards to guard against electrical disturbances of mains. Product offers built-in Power Factor Correction and includes auto select 115/230 Vac nominal voltage, 50/60 Hz input, DC OK signal, and adjustable output voltage. Measuring 3.26 in. wide, 10 A, single-phase, 24 Vdc, DIN Rail power...

Power Source powers stick and TIG welding.

Suited for construction site/outdoor use, Invertec V275-S is rated at up to 275 A to enable users to weld with up to 7/32 in. stick electrodes. Product employs weather-resistant features and meets IP23S environmental rating. Able to operate on input voltages from 208-575 Vac, single- or 3-phase power, unit does not require derating with single-phase input power. It offers Selectable Hot Start,...

Buck-Boost DC/DC Converter delivers up to 1 A.

Model LTC3441 synchronous, fixed frequency converter offers efficiencies up to 95%, optimizing battery run time for battery-powered applications. It operates from input voltage of 2.4-5.5 V and can provide up to 1 A at fixed output voltage between 2.4-5.25 V. Buck-Boost topology allows unit to operate above, below, and equal to output voltage with single inductor. Operating frequency is set...

Power Supplies suit space-restricted areas.

With worldwide approvals, fused inputs, and overload protection, PS5R Slim Line power supplies are DIN Rail or direct surface mountable and have universal, 85-264 Vac voltage inputs. Products include 30 W models, available with 12 or 24 Vdc output, and Class 2 rated, 60 and 90 W models with 24 Vdc output. Products are UL508 and UL1604 listed for hazardous locations.

UPS provides offline protection of PCs and POS systems.

PowerSure PSP combines minimum of 4 min battery backup at full-load, with lightning and surge protection for up to 6 outlets and 1 data line. Units available in 350-650 Va and provide battery power for uninterrupted operation during short power outages. If outage exceeds battery capacity, PowerSure PSP utilizes USB or serial connection to provide controlled, orderly shutdown. Audible and visual...

DC/DC Converter delivers up to 600 mA from 2 channels.

Model LTC3407 1.5 MHz synchronous-buck regulator operates from input voltage of 2.5-5.5 V, using constant-frequency, current-mode architecture. It generates 2 independent output voltages as low as 0.6 V, enabling it to power low-voltage DSPs and microcontrollers. Switching frequency of 1.5 MHz allows utilization of tiny ceramic capacitors and inductors less than 1.2 mm in height. Unit delivers...

Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale

Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.