Vibration-Control Pads suit free-standing machines.
Machine Pads

Vibration-Control Pads suit free-standing machines.

PAD-PAK® Vibration Control Pads are prepackaged to provide proper leveling and loading for machines having 4 points of support. Offered in 45 durometer neoprene, for low-frequency applications, and 70 durometer nitrile, for high damping, each set contains 4 base pads and 4 shim leveling pads. Cross pattern on tops and bottoms assures stable, non-slip surface. Sizes range from 2-10 in. sq...

Read More »
Mounts suit injection molding and die casting machines
Leg Levelers

Mounts suit injection molding and die casting machines

Able to prevent machines from walking, IMW 3-piece wedge mounts offer true vertical lift with adjustment range suitable for machine alignment applications. Standard with oil-resistant nitrile butyl rubber isolation pads, mounts are used with machines that have no holes in mounting feet. They are available in 2 sizes with capacities of 6,000 and 20,000 lb. Available sizes include: 6.23 x 4.26 with...

Read More »
Mounting Clips install accelerometers.
Electronic Component Mounts

Mounting Clips install accelerometers.

Easy-Mount mounting clips may be attached to test structure using double-sided tape or adhesive. Once they are installed, accelerometers may be snapped into clips to make vibration measurements. Swivel-style clips rotate and pivot, permitting sensors installed on curved or sloped surfaces to be aligned along desired plane and axis.

Read More »
Cable-Tie Mounts and Hooks provide secure attachment points.
Cable Tie Mounts

Cable-Tie Mounts and Hooks provide secure attachment points.

Type TY-D(TM) self-clinching cable-tie mounts and hooks permanently secure wires to electronic chassis/enclosures without screws or adhesives. They are offered in varying sizes for installation in sheets with thicknesses from .040 to .125 in. Type TD(TM) mounts allow users to slide ties easily through hardware's eye, while Type TDO(TM) hooks enable users to attach, remove, and return tie-bundled...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Mounting Arm rotates in almost any direction.
Mounts

Mounting Arm rotates in almost any direction.

Scanner Mounting Arm is made of marine-grade powder coated aluminum. It features injection molded rubber ball which firmly mounts scanner to reduce movement or vibrations. Arm comes in 4 in. and 6 in. sizes. Extension joints and base plates are also available.

Read More »
Adjustable Arm ergonomically positions monitors.
Ergonomic Products

Adjustable Arm ergonomically positions monitors.

Gas Assist Monitor Arm allows operators to adjust position of computer monitors horizontally and vertically over range of 12 in. Support plate for monitor has locking tilt function for precise positioning. Arm can be installed on wall, table, or desk and adjusted exactly to operator's comfort level. It supports up to 65 lb, and has abrasion resistant baked enamel finish.

Read More »
Mounting Plates provide stable surface for equipment.
Vibration Damping Mounts

Mounting Plates provide stable surface for equipment.

Lightweight Series 7000 aluminum plates provide flat surface for mounting sensitive equipment. Black-anodized, non-magnetic plates are available with Â-½ thickness in 5 standard sizes up to 24 x 48 in., with flatness of ±0.030 in. over 24 x 24 in. area. They weigh 0.05 lbs per square inch. Mounting holes are available, tapped on English, 1/4-20 x 1 in. grid or metric, M6 x 25 mm grid....

Read More »
Vibration-Isolating Workstations fit in small places.
Vibration Damping Mounts

Vibration-Isolating Workstations fit in small places.

LabMate 9211 Series works in small labs where external vibrations adversely affect operation of sensitive equipment. Tabletops are 24 in. deep with three widths ranging from 24 to 35 in. Automatic leveling and air suspension provide vibration-controlled work environment with low natural frequencies and vertical and horizontal isolation for loads up to 440 lb. Tabletops are made of steel with...

Read More »
Aluminum Saddle mounts cold plates to electronic boards.
Cold Plates

Aluminum Saddle mounts cold plates to electronic boards.

Aluminum Saddle has through or tapped holes for securing company's CP-20 Extended Surface cold plates to electronic boards. It applies consistent force across cold plate, ensuring good thermal connection. All-aluminum cold plates consist of connector tubes welded to micro-channel aluminum extrusion. They can be used with EGW, refrigerant, Fluorinert(R), and other fluids to remove heat from high...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers