New Mounts Products

Storage Rack System protects against earthquake forces.

Tested up to full 200% of AC156 seismic qualification with little or no merchandise shedding or rack damage, Seismic Storage System reduces effects of violent ground forces created during earthquake. Base isolated pallet rack storage system is positioned between columns of upright frames and anchored to floor, allowing rack's upright frames to travel during seismic event. It will not obstruct or...

Lifting Solution includes hoist, mounting, and basket.

Lifting solution includes Gemini Plus portable hoist, Scaff-Trac mounting option, and Equipment Basket. Hoist has single and double line lifting capacities of 600 and 1,200 lb, respectively, and is equipped with non-rotating cable, up limit switch, and failsafe brakes. Scaff-Trac allows cantilever of 3Ã-½ ft. Equipment basket is available in 800 and 400 lb capacities. Other combinations of...

RediMount(TM) System from Danaher Motion Now Standard on Thomson Positioning Tables

Provides significant cost savings with reduced lead times WOOD DALE, IL - Danaher Motion announces that its RediMount(TM) motor mounting system is now a standard feature on all Thomson ball and lead screw driven positioning slides. The industry-unique RediMount(TM) system is a flexible tool that simplifies the integration of Thomson slides into automated assemblies. Customers who in the past...

Direct-Drive Gimbal Mounts offer 1.0-0.13 -µrad resolution.

AMG series provides angular position, rate, and acceleration for system development and production testing. Suited for directing optics, lasers, antennas, and sensors to precise pointing angles, products utilize direct-drive, brushless, slotless torque motors with rare-earth magnets and angular transducers coupled directly to precision shafts for 360Ã-

Key Considerations for Basic Die Cutting: Tooling, Costs, Material Behaviors, and Tolerances

Key considerations to keep in mind when evaluating die cutting as your process of choice for part production.

Laser Diode Mounting Kits suit CS mount lasers.

Turnkey Laser Diode Mounting Kits include 1 aluminum nitride plate and 4 nylon shoulder washers for mounting CS mount or equivalent diodes on cold plates. Plate measures 25 x 25 mm and .635 mm thick with 4 through holes that match diode mounting patterns. It offers thermal conductivity while providing electrical isolation between diode and cold plate. Nylon washers isolate metal screws from diode...

Vibration and Shock Mounts have low vertical spring rate.

Available for static loads from 33-275 lb, 4 M-Style Base Mounts in A 10Z46M Series range in width and height from 1.18-1.97 in. and 2.72-4.61 in. Their 60 durometer natural rubber controls vibrations of 600 cpm or higher. Comprised of 11 models, V-Style Mountings in A 10Z45M Series is offered in 3 configurations to isolate static loads from 9-1,980 lb. These 45 durometer natural rubber isolators...

Cable-Tie Hardware installs permanently without screws.

PEMÃ-® Self-Clinching Type TD(TM) cable tie-mounts and Type TDO(TM) hooks provide permanent attachment points for mounting wires and cables to electronic chassis or enclosures. Both are RoHS compliant and offered in several sizes for installation in metal sheets ranging from .040-.125 in. thick. Tie-mounts allow users to slide ties through hardware's eye for fast cable mounting, while hooks...

Vibration Isolating Stations compensate for load changes.

Personal Vibration Isolation Workstations in 9211 Series deliver vertical and horizontal isolation for small labs and tight spaces where external vibrations adversely affect operation of sensitive equipment. Able to accommodate loads to 440 lb, Class 100 cleanroom-compatible units feature Active-Air Suspension system and are available with VibraDamped steel tabletops in sizes from 24 x 24 in. to...

Vibration Control Workstation isolates heavy loads.

Suited for heavy, tall, or moving loads, 1200 Series Vibration Isolation Workstation employs Active-Air Suspension to handle up to 2,800 lb loads, including those with high centers of gravity. Vibration-controlled work environment has vertical natural frequency of 1.6 Hz at load and vertical and horizontal isolation efficiencies up to 93% and 88% at load. Along with automatic leveling system,...

Adapter mounts CCD camera to microscope.

Microscope-body camera adaptor 07 ACM 001 allows any CCD camera with C-mount interface to be mounted onto any Melles Griot microscope body for remote or heads-up viewing. Two-piece adaptor threads directly into microscope body and allows camera rotation for image alignment.

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.