Winsted Corporation Releases New Sky Track Monitor Walls to Mount Monitors on Walls Where Mounting is Not an Option
The Sky Track Monitor Wall features monitor mounts, a removable panel, a leveling foot for height adjustments, a customizable steel angle, two mounting contact points and the ability to control monitor viewing distances. The product is measured at 1.5 inches by 3 inches for horizontal extrusion for structural support and 1.5 inches by 1.5 inches for vertical extrusions to mount monitors.
Read More »
New Lifeline Boost Access Control Pedestal Mount Comes with Enclosed Raceway
The Lifeline Boost Access Control Pedestal Mount is offered in standard premium, card collector and Nortech card collector models. The standard premium model is used for integration of card reader, barcode reader or biometric devices. The card collector model is designed for integrating a third-party card collector device whereas the Nortech model comes with Nortech MRC350 card collector. The...
Read More »
New Three-Axis Gimbal Mount Features Full 360 Degrees Rotation of Each Axis
Optimal Engineering Systems, Inc. announces AU300-AER three-axis Gimbal Mount with 10kg load handling capacity and 300 mm x 300 mm clearance around the roll axis stage. The bi-directional stepper motors with knobs for manual adjustments derives azimuth, elevation and roll axis. Each axis has a low backlash worm gear drives, precision "V" groove, cross roller bearings, repeatability and positional...
Read More »
HellermannTyton Introduces FlexTack That Can Work With 18 to 50 Pound Cable Ties to Provide Stability
HellermannTyton’s FlexTack cable tie mount adheres to curved and moderately angled surfaces where only a screw mount would do the job. It enables installers to install route wires, cables and hoses in off-limit areas. The product is engineered to be used on varnished, powder coated, bare metal or plastic surfaces. The tie mount is manufactured from heat stabilized PA66 nylon in black and white.
Read More »
Microcontrollers in Power Electronics
This white paper explores the power supply advantages of digital microcontrollers, as well as how digital power supplies can be used to manage entire systems.
Read More »
New Magnetic Mounts Offer Clean and Reliable Connectivity for Automation
Balluff's new magnetic mounts provide a simple and cost-effective solution for regular tool or die changes. The mounts use strong earth magnets to easily engage or disengage. The magnetic mounts are designed for Q40- and M30-style inductive couplers and also protect them from impact or abrasion. Their break-away capability makes the tool or die changing quick and simple, reducing downtime.
Read More »
New Break-Off Magnetic Mounts are Designed for Aligning RFID Readers for Tag Detection
Baluff’s Break-Off Magnetic Mounts are suitable for presses in which tool or size changes are required. Units are used for aligning read/write heads and assist in maintaining continuity of the RFID signal. Break-Off Magnetic Mounts enable fast connection and disconnection of RFID readers and feature positive stop for damage protection.
Read More »
Piab's New Suction Cup Mount is Designed for Industry Standard End-of-Arm Tooling Connections
Piab’s Suction Cup Mount comes with interchangeable parts for mix and match mounting system. Unit provides mounting options such as Universal joint, mount (2 x 8/10.5mm), Lock-pin (19mm), and Ball-joint. Offered in lengths from 45 to 200 mm, mount is designed for handling, for instance, automotive body parts or plastic details. Unit’s ball-shaped fastener comes with an optional mechanism and...
Read More »
TMA-1 Tablet Mount Adaptor allows for hands-free tablet use.
TMA-1 Tablet Mount Adaptor is available in 5.3 in. to 7.9 in. wide and 7.7 in. to 10.6 in. high and 0.45 in. deep. Unit is designed for VMP’s LCD-1B, LCD-1CB, LCD-2B, FP-SFTB and FP-SFB mounts and can hold tablets in 7 - 11 in. sizes. Adaptor weighs 6 lb and feature black finishing.
Read More »
Silicone Vibration/Shock Absorption Mounts are compliant to RoHS standards.
GN 256 Silicone Vibration/Shock Absorption Mounts are offered with tapped hole or threaded stud. These unit are made from age-resistant silicone rubber material and are used as end-stop bumpers or leveling feet. Mounts are suitable for food and medical industry and can act as dampers to prevent shock and rebound.
Read More »
Wireless Charging Magnetic Mounts come with LED charging indicator.
OEM Direct Fit MagicMount Charge Wireless Charging Magnetic Mounts are compatible with Qi-enabled smart phones from Apple and Samsung. Units deliver up to 10W of Qi wireless charging power and feature vehicle-specific T-harness for power/ground. Products come with built-in foreign object detection.
Read More »
Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application
Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.
Read More »
