New AU300-ER Two-Axis Gimbal Mount Features 360 Degree Continuous Rotation of Each Axis
Handles a load up to 20 kg with a clearance of 300 mm x 300 mm about the roll axis of the stage. The pitch and roll axes are driven by bi-directional stepper motors with knobs. Offers a travel speed of 12° per each axis, repeatability and positional accuracy of 18 arc seconds.
Read More »
New Stafford Shaft Collars, Couplings & Mounts Available in Standard Aluminum, Steel and Stainless Steel Parts
Include parts for attaching vision systems, sensors, grippers and other devices on drones permanently or adjustable and quick-change requirements. Enables OEMs to match design requirements for strength, weight and corrosion-resistance. Available in 0.125” to 14” I.D. sizes with various bore configurations, depending upon the part.
Read More »
New Iris 3D with Vision Positioning System Delivers Laser Line Visibility, Even in Bright Ambient Lighting Environments and on Difficult Work Surfaces
Iris™ 3D is portable system and enables aerospace manufacturers to streamline composite ply layup, paint masking and a host of other labor-intensive tasks. Enables operators to easily locate laser lines and get the job done faster. Positioning mount is innovative remote-controlled option that optimizes the system's projection by repositioning the laser on challenging tools or large work...
Read More »
New FRM Series Roof Mounts Eliminate the Need for Lift/Bucket Service Calls
The FRM Series Non-Penetrating Roof Mounts are suitable for wireless security surveillance systems, off-air antenna and satellite internet systems. The units are available in FRM-125, FRM-166 and FRM-200 models with 35 x 35 x 60.5 in., 35 x 35 x 30.5 in., 35 x 35 in x 30.5 in. dimensions respectively. The mounts utilize 8 x 8 x 16 in. cinderblocks as ballast and are constructed of steel and uses...
Read More »
Heated Deck Panels
Heated Deck Panels: The playbook to how these snow-free walkways work for bridges, sidewalks, and platforms
Read More »Winsted Corporation Releases New Sky Track Monitor Walls to Mount Monitors on Walls Where Mounting is Not an Option
The Sky Track Monitor Wall features monitor mounts, a removable panel, a leveling foot for height adjustments, a customizable steel angle, two mounting contact points and the ability to control monitor viewing distances. The product is measured at 1.5 inches by 3 inches for horizontal extrusion for structural support and 1.5 inches by 1.5 inches for vertical extrusions to mount monitors.
Read More »
New Lifeline Boost Access Control Pedestal Mount Comes with Enclosed Raceway
The Lifeline Boost Access Control Pedestal Mount is offered in standard premium, card collector and Nortech card collector models. The standard premium model is used for integration of card reader, barcode reader or biometric devices. The card collector model is designed for integrating a third-party card collector device whereas the Nortech model comes with Nortech MRC350 card collector. The...
Read More »
New Three-Axis Gimbal Mount Features Full 360 Degrees Rotation of Each Axis
Optimal Engineering Systems, Inc. announces AU300-AER three-axis Gimbal Mount with 10kg load handling capacity and 300 mm x 300 mm clearance around the roll axis stage. The bi-directional stepper motors with knobs for manual adjustments derives azimuth, elevation and roll axis. Each axis has a low backlash worm gear drives, precision "V" groove, cross roller bearings, repeatability and positional...
Read More »
HellermannTyton Introduces FlexTack That Can Work With 18 to 50 Pound Cable Ties to Provide Stability
HellermannTyton’s FlexTack cable tie mount adheres to curved and moderately angled surfaces where only a screw mount would do the job. It enables installers to install route wires, cables and hoses in off-limit areas. The product is engineered to be used on varnished, powder coated, bare metal or plastic surfaces. The tie mount is manufactured from heat stabilized PA66 nylon in black and white.
Read More »
New Magnetic Mounts Offer Clean and Reliable Connectivity for Automation
Balluff's new magnetic mounts provide a simple and cost-effective solution for regular tool or die changes. The mounts use strong earth magnets to easily engage or disengage. The magnetic mounts are designed for Q40- and M30-style inductive couplers and also protect them from impact or abrasion. Their break-away capability makes the tool or die changing quick and simple, reducing downtime.
Read More »
New Break-Off Magnetic Mounts are Designed for Aligning RFID Readers for Tag Detection
Baluff’s Break-Off Magnetic Mounts are suitable for presses in which tool or size changes are required. Units are used for aligning read/write heads and assist in maintaining continuity of the RFID signal. Break-Off Magnetic Mounts enable fast connection and disconnection of RFID readers and feature positive stop for damage protection.
Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.
Read More »
