Mounting Accessory is suited for intrinsic safety barriers.
Mounts

Mounting Accessory is suited for intrinsic safety barriers.

Suited for hazardous and non-hazardous applications, KF-ExDuct optimizes space by mounting up to 90 safety barriers along 1.8 m length. Aluminum extrusion's integrated cable duct allows system and field cables to be routed directly below barriers, with suitable isolation between. Power can also be applied to barriers with Power Rail, which snaps into trough of standard 35mm DIN rail pre-molded...

Read More »
Adjustable Arm adds movement to flat panel monitors.
Miscellaneous Arms

Adjustable Arm adds movement to flat panel monitors.

Neo-Flex(TM) Arm clamps to back of desk and provides 8 in. of vertical movement for positioning monitor so that top of screen is at, or slightly below, user eye level. It is compatible with VESA-compliant flat panel monitors that weigh 18 lb or less and enables 180° right/left and up/down monitor tilt, 360° monitor portrait/landscape rotation, and 360° arm side-to-side rotation....

Read More »
Machine Mount provides precision leveling.
Leg Levelers

Machine Mount provides precision leveling.

Model MHD offers horizontal and vertical stability while providing vibration damping. Precise fit between leveling plate and base eliminates horizontal sway. Shock absorbing, Nitrile rubber soles reduce vibration and prevent creeping in compliance with OSHA anchoring requirements. Screw-on installation simplifies setup and re-location. With load capacity of 3,000-15,500 lb, mount offers...

Read More »
Trailer Suspension is designed for rear-discharge tankers.
Vehicle Suspensions

Trailer Suspension is designed for rear-discharge tankers.

Raised-center-INTRAAX® offers benefits of integrated trailer suspension system to rear-discharge tankers. System offers 23,000 and 25,000 lb capacity models for 77.5 and 71.5 in. tracks in top-mount configurations and ride heights from 13.5-19 in. It features standard trailer Cam Tube System(TM) to reduce S-cam maintenance and can be customized with READY-TO-ROLL® options.

Read More »
Plastic Knobs
Sponsored

Plastic Knobs

Knobs - Customizable Solutions To learn more about the different types of Knob solutions available, and which ones to select for your specific application, download this guide now.

Read More »
Mounting Components fit EOAT aluminum extrusions.
Suction Cups

Mounting Components fit EOAT aluminum extrusions.

SLSA Vacuum Cup Mounting Components let system designers build and service custom EOAT (end of arm tool) assemblies using aluminum extrusions in inch or metric sizes from 25-40 mm. Adjustable suspension bracket hangers can be locked into position on top or bottom of extrusion rail. Components also include standard- and cup-level compensator mounting brackets and suspensions, adapters, fittings,...

Read More »
Wedge Mounts offer precision leveling for heavy loads.
Leg Levelers

Wedge Mounts offer precision leveling for heavy loads.

Suited for use with industrial and injection molding machinery, WM Series mounts ensure precise fit between leveling plate and base, eliminating horizontal sway. Topped by anti-slip pad and mounted on damping machine pad, mounts reduce vibration up to 80% and prevent creeping and walking. They can be bolted to machine or to concrete flooring and are adjustable. Bolt-on, bolt-through, and...

Read More »
LED Mounts withstand temperatures to 300°F.
Electronic Component Mounts

LED Mounts withstand temperatures to 300°F.

Series CLM(TM) employs bi-materials and co-extrusion process to provide alternative to injection molded spacers. Rigid outer shell with softer, shock absorbing inner lining provides rigid mount, while conforming to and simultaneously protecting leads. Mounts works with T-1, T-1Â-¾, rectangular, square, and custom LED configurations and accept 0.100 in. pitch discrete components. Heights...

Read More »
PC/104 Enclosure offers multiple configuration options.
Electrical Enclosures

PC/104 Enclosure offers multiple configuration options.

Fabricated from 0.0625 in. 5052 aluminum, Model ENC-104 measures 7.725 x 8.325 x 4.0 in. and accepts stack of up to 4 PC/104 or PC/104-Plus modules. It consists of chassis base, chassis cover, 2 end plates, square PC/104 module stack plate, and optional 40 W power supply. Chassis base attaches vertically on wall, on table, under counter, or inside equipment. Enclosure suits embedded applications...

Read More »
Leg Levelers

Leveling Machine Mount integrates caster and leveler.

Constructed of formed steel, LevelCaster(TM) handles loads from 25-800 lbs. Unit offers 2.83 in. dia nylon wheels, hand-leveling adjustment option, 360° freedom of motion, and dual mounting designs. Product also incorporates precision components and ball bearings that allow equipment to be adjusted and repositioned under full load.

Read More »
Horizontal Machine Supports prevent walking and stop sway.
Vibration and Mechanical Dampers

Horizontal Machine Supports prevent walking and stop sway.

AirLoc Horizontal Wedgmount® Machine Supports offer integral damping and cushioning capabilities that dissipate up to 90% of horizontal load forces. Available with different mounting brackets, hardware, and vibration control pads, products can be adapted to customer requirements for machines and presses up to 3,000 tons or more. Installations include 4 individual supports offered in sizes...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics