Vibration Damping Mounts

ROSTA® Ingenuity Impresses Powder and Bulk Processors

Rosta AB Oscillating Mounts from Lovejoy, Inc. Increase Processing Efficiency DOWNERS GROVE, IL - July 18, 2006 -ROSTA® AB Oscillating Mounts exhibited by Lovejoy, Inc. proved to be a hit with show attendees and exhibitors alike at the International Powder and Bulk Solids Conference and Exhibition this past May in Rosemont, Illinois. Lovejoy, Inc., showcased the ROSTA mounts in addition to...

Read More »
TV, Monitor, and Camera Mounts

Mounting Accessory facilitates plasma/LCD installation.

Measuring 11 in. wide, Model PWB-100 installs in wall behind display, allowing screen to sit flush against wall while providing neat and secure environment for audio, video, control, and power connections. Designed to mount along bottom edge behind plasma or LCD display, box accommodates up to 6 single-space FSR Intelligent Plate Solution plates as well as single-gang gem box for ac power....

Read More »
Antenna Mounts

Position and Rate Gimbals enable smooth, accurate motion.

Suitable for directing optics, lasers, antennas, and sensors to precise pointing angles and able to accommodate up to 200 mm dia loads, AMG LP series incorporates low-profile, direct-drive rotary stages. Coupled directly to precision shafts to enable 360° continuous motion, S-series brushless, slotless servomotors feature rare-earth magnets and angular transducers. Typical line gimbal...

Read More »
Isotech Offers Wide Range of Vibration Isolation Mounts to Satisfy Applications for Multiple Industries
Vibration Damping Mounts

Isotech Offers Wide Range of Vibration Isolation Mounts to Satisfy Applications for Multiple Industries

June 1, 2006 Horsham, Pa (PRWEB) June 1, 2006 -- Isotech Inc., a supplier of precision linear motion products, today, announced the offering of a complete line of vibration isolation mounts and pads to meet the needs of applications found in many industries that require vibration or shock reduction. From air compressors to electronic circuit boards, vibration mounts and pads are used to limit the...

Read More »
Mounting Assembly holds shaft or pipe 1-6 ft above surface.
Mounts

Mounting Assembly holds shaft or pipe 1-6 ft above surface.

Securely attached to machined aluminum base, Stafford Universal Mount Assembly features hinged collar that opens to facilitate installation or adjustment of shaft, tube, or pipe. Steel or stainless steel hinged collars come in inch and metric sizes from 1/8-4 in. ID, and rigid stand-off bases have tapped mounting holes and come in 6 heights from 1-6 in. Options include a quick-release handle and...

Read More »
Vibration and Shock Mounts feature horizontal stiffness.
Vibration Damping Mounts

Vibration and Shock Mounts feature horizontal stiffness.

Available in 2-ring, 3-ring, or combination varieties, natural rubber Series V10Z47MRM provides 9 mounting styles and 10 load ratings from 165-2,645 lb, allowing for up to 90 options. Units range in diameter from 2.36-9.06 in. and in height from 1.38-6.61 in. Low natural frequency remains constant, providing vibration and electrical isolation in rotating and reciprocating production machinery,...

Read More »
Floor Stands provide means to mount safety light curtains.
Miscellaneous Stands

Floor Stands provide means to mount safety light curtains.

Available in sizes from 40-56 in., Light Duty Floor Stand offers mounting alternative for light curtains as well as their PA4600 Perimeter Access Guarding Device. Mounting brackets and concrete mounting bolts are included, and no additional accessories are required. Also offered in heavy-duty versions, product is suited for mounting bottom beam of light curtain or perimeter guard within 12 in....

Read More »
Guardrails and Railings

Harsh Environment Post Mounts meet AC174 requirements.

Constructed of 10- or 13-gauge steel, UltiMount(TM) Coastal universal post mounts for decking are available in respective heights of 42 and 36 in. and work with vinyl and composite railing posts. They can be installed on all decking surfaces, including wood, composite, vinyl, and concrete. Mounts are protected against corrosion by hot-dip galvanized interior and exterior steel surfaces and...

Read More »
OptoTherm Adds Focus and Pan Stage Camera Accessory
TV, Monitor, and Camera Mounts

OptoTherm Adds Focus and Pan Stage Camera Accessory

OptoTherm has added a focus and pan stage to its inventory of camera accessories available for purchase. This rack and pinion stage mounts between the camera and camera mounting device (stand, tripod, positioning arm). It enables the camera to be precisely positioned in the x (30 mm travel), y (35mm travel), and z (32 mm travel) directions. This stage is particularly useful when using a thermal...

Read More »
AirLoc Reduces Harmful Vibration on Okuma Lathe!
Vibration Damping Mounts

AirLoc Reduces Harmful Vibration on Okuma Lathe!

Recently AirLoc was invited to the Okuma facility in Charlotte, NC to perform tests, evaluating AirLoc Elastomeric Pad materials' ability to reduce internal machine vibration. An Okuma Captain L370 CNC lathe was selected for the test, performing a heavy cut on a 4 dia. steel bar. After obtaining machine and floor baseline readings, the accelerometer was placed on the machine frame, next to the...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers