Vibration Damping Mounts

How Four Little Black Pads Save The Day When There's A Little Too Much

Despite the song's lyrics, not all vibrations are good. California resident Barbara Pyles was excited when her new high efficiency washing machine and dryer arrived at her doorstep. However, the excitement soon turned to surprise when the vibration from the spin cycle caused a little more shaking than she was used to. At first, I thought something was wrong with my washing machine, but I was so...

Read More »
Shock Absorbers

AirLoc Low Frequency B4 BiLoc Pads Keep Rooftop Cooling Towers Quiet!

Recently, Phil Hegge, Director-Facilities Operations at Michigan State University Foundation's MBI Building was responsible for installing new Marley 450 ton cooling towers on the roof of the building located in a nearby Corporate Research Park. Space was limited and the units were positioned on 4 inch beams connected to the roof. High deflection spring isolators are normally used for these...

Read More »
Noise Suppressors

AirLoc Low Stiffness Pads Help J.P.L. Compressor Service Quiet Rooftop Equipment!

AirLoc Application News... AirLoc low stiffness pads help J.P.L. Compressor Service quiet rooftop equipment! J.P.L. Compressor service of Westminster, CA, with 17 years in business, sells, services, rebuilds/repairs, and installs industrial air compressor systems, including rooftop equipment. Joe Lester, J.P.L. installation technician, uses AirLoc low stiffness, 32 pad to insure that his...

Read More »
Components provide sound damping and vibration resistance.
Miscellaneous Compounds

Components provide sound damping and vibration resistance.

Suited for building of machinery and equipment, Urethane, Rubber, and Sponge Components come in round and metal plate-mounted versions as well as configurable block versions. Urethane and rubber bumpers feature round tips, and come in choice of solid or through-hole designs. With diameters, lengths, and through-hole sizes configurable in 1 mm increments, hundreds of sizes and shapes are...

Read More »
Nylon Base Leveling Mounts swivel 15° and will not separate.
Leg Levelers

Nylon Base Leveling Mounts swivel 15° and will not separate.

Offered in steel and stainless steel, with or without lag holes, tapped-type NY-LEV® nylon base machinery mounts meet leveling and height adjustment needs. They are constructed with tapped socket and swivel 15° in all directions. Due to hex bar stock manufacturing process, hex acts as stop when moving socket beyond its 15° swivel point and ensures socket will not separate from...

Read More »
Storage Rack Base Isolation System Wins National Earthquake Mitigation Award
Structural Braces

Storage Rack Base Isolation System Wins National Earthquake Mitigation Award

From testing, we determined RIDG-U-RAK's base isolation system can dissipate 85% of the seismic energy exerted on a storage system during an earthquake." North East, PA - June 2008 - RIDG-U-RAK's patented Seismic Base Isolation System was awarded first place honors for "Excellence for Innovation" in the earthquake mitigation category at the 2008 National Earthquake Conference. The Seismic Base...

Read More »
Equipment Coolers

NEMA 12 Cabinet Coolers fit in tight spaces.

Side Mount Kits make mounting of a NEMA 12 Cabinet Cooler possible when electrical enclosure has limited space on top or side. Cabinet Cooler converts compressed air to 20°F without refrigerants or CFCs and circulates air through enclosure to eliminate high temperature malfunction. Cooling capacities up to 5,600 BTU/hr are available. Side Mount Kits maintain NEMA 12 rating of large and...

Read More »
Ball Bearings

Ball Bearings locking device - Torksleeve TSM2

TSM2 offers a mechanical alternative to a conventional mounting of ball bearings to shaft, where assembly time, interchangeability in the field and adjustability is considerably simplified. TSM2 rigidly mounts bearings to shafts, offers infinite axial adjustment, eliminates costly secondary shaft operations, saving production time and cost. The compact and lightweight unit locks in seconds...

Read More »
TV, Monitor, and Camera Mounts

Cradle mounts codec and camera on flat panel display.

Using MOD (Mount On Display) Cradle, LifeSize Express codec and either LifeSize HD PTZ camera or LifeSize Focus HD videoconferencing camera can be securely attached to flat panel display. Integrated wire management brings camera cable to codec, while thermal standoffs allow full cooling air flow. Fabricated from black acrylic, cradle is fully adjustable to interface with nearly any flat panel...

Read More »
Camera Stabilizer System suits video and film production.
TV, Monitor, and Camera Mounts

Camera Stabilizer System suits video and film production.

FLYER-LE features sled assembly with robust carbon fiber extendable post, index system that keeps all parts in alignment, and friction-free gimbal assembly with large knurled extended handle. Locking mechanisms for top and bottom of sled are tool free and sled will work with both 12 and 24 V cameras. System also has ISO-elastic stabilizer arm that supports 19 lb of camera weight and vest assembly...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers