Applied Motion Products Customizes Integrated Motor to Increase Package Handling Flexibility of New Innovative Conveyor System
Watsonville, CA…November 8, 2018…Applied Motion Products customized an integrated stepper motor package that offered a single motion control solution for an innovative conveyor system that saved on space, wiring, and cost over conventional motor and drive solutions. Capable of handling packages in a variety of configurations, the innovative conveyor system needed a motor and actuator assembly...
Read More »
Siemens Releases New Simotics HV C Motors with Enclosed Internal Circulation
The Simotics HV C Motors are offered in vibration-optimized robust housing design and are suitable for safe areas and explosion protection zone 2. These motors are connected to the Sidrive IQ digital platform via Simotics Connect 600 connector box for cloud-based analysis of the condition data. The motors are used in pumps, fans, compressors, extruders, grinders and mixers. The units are offered...
Read More »
Siemens Releases New Simotics HV C Motors with Enclosed Internal Circulation
The Simotics HV C Motors are offered in vibration-optimized robust housing design and are suitable for safe areas and explosion protection zone 2. These motors are connected to the Sidrive IQ digital platform via Simotics Connect 600 connector box for cloud-based analysis of the condition data. The motors are used in pumps, fans, compressors, extruders, grinders and mixers. The units are offered...
Read More »
AutomationDirect Adds SureStep Stepping System Motors, Encoders and Inertia Dampers
New stepper motors, encoders and inertia dampers have been added to the SureStep® system of step motor control. SureStep series high-torque industry-standard NEMA 14, 17, 23, and 34 stepper motors now provide holding torque from 8 to 1288 oz-in. The new smaller frame size NEMA 14 motors (1.4 wide) start at $22.00 and are available in single and dual shaft versions. The SureStep family has...
Read More »Russian Baltic Birch Sourcing Guide
This e-book is a sourcing guide for Baltic Birch plywood.
Read More »
AutomationDirect Adds SureStep Stepping System Motors, Encoders and Inertia Dampers
New stepper motors, encoders and inertia dampers have been added to the SureStep® system of step motor control. SureStep series high-torque industry-standard NEMA 14, 17, 23, and 34 stepper motors now provide holding torque from 8 to 1288 oz-in. The new smaller frame size NEMA 14 motors (1.4 wide) start at $22.00 and are available in single and dual shaft versions. The SureStep family has...
Read More »
New Stepper Motor from Oriental Motor Features a Right-angle FC Type
Oriental Motor’s new AZ Series FC Type stepper motor has a new “Face gear.” It is a compact, orthogonal, shaft geared motor comprised of a disc-shaped gear that works with a spur gear. The gearhead’s slim size makes it optimal for high precision, compact, and space saving applications. The product is available with two cable orientation, in a 42 mm or 60 mm mounting face and in both AC...
Read More »
New Stepper Motor from Oriental Motor Features a Right-angle FC Type
Oriental Motor’s new AZ Series FC Type stepper motor has a new “Face gear.” It is a compact, orthogonal, shaft geared motor comprised of a disc-shaped gear that works with a spur gear. The gearhead’s slim size makes it optimal for high precision, compact, and space saving applications. The product is available with two cable orientation, in a 42 mm or 60 mm mounting face and in both AC...
Read More »
New Stepper Motors Use a Neodymium Magnet in its Rotor Design
The PKP Series of stepper motors from Oriental Motors was recently expanded to include a 2-phase Flat Type and a 5-phase TS Geared stepper motor. The stepper motors now use a neodymium magnet in its rotor design which allows for a lower vibration when compared to the original PKP stepper motors. The 2-phase Flat Type is available in 2 frame sizes at 1.65 inches or 2.22 inches. The 5-phase TS...
Read More »
New Stepper Motors Use a Neodymium Magnet in its Rotor Design
The PKP Series of stepper motors from Oriental Motors was recently expanded to include a 2-phase Flat Type and a 5-phase TS Geared stepper motor. The stepper motors now use a neodymium magnet in its rotor design which allows for a lower vibration when compared to the original PKP stepper motors. The 2-phase Flat Type is available in 2 frame sizes at 1.65 inches or 2.22 inches. The 5-phase TS...
Read More »
New MAC Motor from JVL Eliminates the Need for Separate Servo Driver or Controller
The MAC® Motor with 3000 W rating is combined with high-dynamic AC servo motor, hall-sensors, encoder, power supply, driver and positioning controller and Nano-PLC. The motor come in 311.8 mm length and deliver torque of 9.55/28.6 Nm at 3000 rpm. The motor is supplied with power via 3x400 VAC M23 connectors and is offered with Bluetooth, WLAN, ZigBee, EtherCAT, EtherNet/IP, CANopen and Profinet...
Read More »
Eliminate Expensive Repairs with the Hot-Shot Pipe Thawing Machine
The new Hot Shot Pipe Thawing Machine delivers an innovative and highly effective approach to thawing frozen pipes. Easy to use and versatile, it is loaded with robust features that further suit it to many challenging environments. To learn all about it, see our video.
Read More »
