New Motors Products

Gearmotor meets food industry sanitary requirements.

Ultramite SS right-angle, helical bevel gear drives feature smooth housing and C-Face mounting surfaces constructed of corrosion-resistant 316SS Stainless Steel. All unused housing holes are plugged with stainless steel caps, and nameplate information is etched into housing. Dual Lip/High Pressure Exclusion Seals keep lubrication in, while standing up to harsh chemical and high-pressure wash down...

Step Motor is designed for limited space applications.

Provided with miniature E4 encoder from US Digital, 211 series 1.8Ã-º, NEMA 11, bipolar step motors measure 1.1 in.Ã-² and are available in 1.24, 1.75, and 1.99 in. lengths. Product, depending on length, can produce max holding torques of 9.2-16.6 oz-in. Integrated encoder provides digital quadrature encoder feedback of motor position as well as stall detection. Capable of tracking...

Inverter Duty Motors/Gearmotors work in factory automation.

Pacesetter(TM) AC inverter duty motors, gearmotors, and AC variable speed controls feature Quintsulation(TM) 5-stage insulation system. Protected against spikes and corona damage caused by inverter, motors and gearmotors are rated from 1/25-Ã-¾ hp, 230 Vac, 60 Hz, 3-phase. Fan-cooled, totally enclosed units feature aluminum center ring and endshields as well as hardened helical output...

Brushless DC Kit Motor features smooth operation.

Suited for applications sensitive to torque ripple, model 000308-02 produces cogging torque of no greater than 1 oz-in. at 60 rpm. Smooth running characteristics make unit eligible for use in high-resolution printing, scanning, and positioning applications. Proprietary encapsulation process protects motor windings in harsh environments. Measuring 3.6 x 1.25 in., product has peak torque of 200...

Speciality Heat Exchangers 101: Considerations for Choosing the Right One for Your Application

Specialty heat exchangers play an important role in a wide variety of industrial applications, and it's crucial to select the correct device for your application. Check out this guide and learn how to choose the right heat exchanger.

DC Gearmotor accepts any 24 Vdc source.

Measuring 2.14 in. dia x 7.75 in. long, Model MMP.TM55-24V.GP52-100.1 features keyed output shaft measuring 12 mm dia x 25 mm long. Output is rated for 10.0 NM continuous torque at 46 rpm and 40 Nm peak. Unit requires 3.0 A at 24 Vdc to generate full load output torque. Mounting is accomplished with 4 face-mount M5 threaded holes spaced on 40 mm dia BC. Options include integral optical encoders,...

Intelligent Brushless Motors provide distributed control.

Based on MotionChip(TM) DSP Control Technology, IM23x motors provide motion control solutions for pulse and direction; stand-alone, pre-stored sequences; and multi-axis applications. Motor, power electronics, controller, position sensor, and interface are integrated into one 104-144 x 57 x 57 mm unit with local digital and analog I/O signals. Offered in 3 lengths, motors produce 0.1-0.3 Nm...

Gear Motor runs from any 12 V DC source.

Model MMP.TM55-12V.GPK52-029.1 is rated for 2.9 Nm continuous torque at 160 rpm, with 9 Nm peak. Measuring 2.14 in. dia x 7.25 in. long, servo motor features keyed output shaft with 12 mm dia and 25 mm length. Mounting is accomplished with 4 face mount M5 threaded holes, and available options include integral optical encoders, failsafe brakes, analog tachometers, and planetary gear heads.

Brush DC Motors feature 7-slot skewed armatures.

PittmanÃ-® Series 8000 brush-commutated DC motors minimize magnetic cogging at low speeds, which allows smooth and quiet operation. Motors are available in 3 lengths: 2.070, 2.445, and 2.915 in. They can achieve peak torques up to 16.8 oz-in. and speeds up to 10,650 rpm for standard motors at rated voltages. Windings are resin-impregnated for greater reliability. Applications include data...

Non-Captive Linear Actuator occupies 0.8 in. space.

Suited for linear motion applications, Size 8 hybrid linear actuator features engineering thermoplastics in rotor drive nut and stainless steel Acme lead screw for quiet and maintenance-free operation. It is available in resolutions from 0.0015-0.04 mm per step and delivers thrusts of up to 10 lb. Design is suited for linear travel requirements and applications where lead screw is secured at both...

DC Gearmotor accepts any 24 Vdc source.

Measuring 2.14 in. dia x 7.25 in. long, Model MMP.TM55-24V.GPK52-029.1 has keyed output shaft of 12 mm dia by 25 mm long. Mounting is accomplished with 4 face-mount M5 threaded holes, equally spaced on 40 mm dia BC. Output is rated for 2.9 Nm continuous torque at 160 rpm and 9 Nm peak. Motor requires 3.0 A at 24 Vdc to generate full load output torque. Options include optical encoders, failsafe...

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.