End Mills are suited for machining difficult materials.

End Mills are suited for machining difficult materials.

Poly-Crystalline Diamond (PCD) tools have matrix of randomly arranged diamond crystals, bonded to form hard film or wafer, which are cut to desired form for end mill's cutting edge and permanently affixed to precision manufactured carbide shanks. Formed via sintering process, Cubic Boron Nitrate wafers undergo tool manufacturing process similar to that of PCD tools and are capable of machining...

Read More »
Bead Mills reduce particles to submicron sizes.

Bead Mills reduce particles to submicron sizes.

Horizontal Agitator Bead Mills grind particles with initial fineness of 1-20 micrometers down to 40-200 nanometers. In enclosed vessel filled with grinding media, agitator shaft activates media, creating shearing and impacting forces. Rotation of agitator imparts energy to surrounding media. Forces either fracture, tear, or crush particulate. Dynamic Cartridge Media Separator retains media in...

Read More »
Machining Center suits aluminum and non-ferrous materials.

Machining Center suits aluminum and non-ferrous materials.

The M35 Aluminator(TM) High-Speed Machining Center offers 60,000-rpm spindle for applications of 0.25 in. OD or less. Bed size is 40 x 27 in. with machining area of 40 x 27 x 8 in. Unit requires 208 V single phase power with feed rates up to 400 in./min, cutting accuracies with repeatability of Â-

Read More »
Machining Center uses thermal displacement compensation.

Machining Center uses thermal displacement compensation.

Table of M-V50-FM vertical machining center moves in Y-axis only, to minimize required floor space. Headstock construction and ballscrew with 50 mm dia and 12 mm lead increases machine's rigidity. Travels are X-31.5, Y-20.1, and Z-17.7 in., with 15-position ATC. Features include low vibration 30 hp integral spindle, and spindle speed of 14,000 rpm, with 30,000 rpm option.

Read More »
Ball Mills offer speeds to 650 rpm.

Ball Mills offer speeds to 650 rpm.

Bench-top planetary ball mills provide continuous operation without cooling down times. Single-station Model PM 100 handles grinding jars from 50-500 ml, while dual-station Model PM 200 accepts jars up to 125 ml. Both include easysafe clamp, balance control, memory for 10 parameter combinations and delayed start, and motor driven lock of cover. Display provides parameter setting and control,...

Read More »
Roll Mills reduce solids to tightly controlled particle size.

Roll Mills reduce solids to tightly controlled particle size.

SUPREMEÂ-® Model 1010 Double Roll Mills come in stainless steel or carbon steel, and are capable of milling or cracking within narrow output range without degrading valuable qualities of feed material. Materials are milled to controlled mesh sizes from 13-150 mesh without high impact, high stress, or high speed rotation. Smooth, serrated, and grooved rolls are available. Mills come in single,...

Read More »
End Mill suits die/mold applications.

End Mill suits die/mold applications.

ValMILL(TM) 400 finishing ball nose end mill employs cutter design with TorxPlus(TM) insert locking mechanism. End mill cutter bodies are available in 6 cutter diameters from .375-1.25 in., and max recommended speeds range from 32,500-40,000 rpm. Product uses precision ground, VP5007 grade inserts that have 2 effective teeth per insert and provide cutting diameter accuracy of Â-

Read More »
Milling Grades suit finishing/roughing applications.

Milling Grades suit finishing/roughing applications.

Grades KC915M and KC935M, suited for milling applications, have one layer of medium temperature chemical vapor deposition titanium carbonitride, one layer of fine-grain alpha structure aluminum oxide, and graded interface layers that increase adhesion between layers. KC915M is suited for semifinishing to roughing of cast iron and ductile irons, while KC935M is for general purpose machining and...

Read More »
Endmills have replaceable blades.

Endmills have replaceable blades.

SUPER SETT(TM) Super Abrasive Precision Endmills and Inserts, suited for profile, plunge, and chamfer milling applications, are mini-diameter PCD end mills with coolant thru. Axial adjustment on each pocket enables adjustments of Â-

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics