New Mills Products

Seco Increases Flute Options for Popular Jabro® High-feed End Mill

TROY, Mich., Dec. 1, 2016 – Seco has expanded the high-feed machining applicability of its Jabro-HFM JHF980 solid-carbide end mill with new 4- and 5-flute options. The additional flutes allow part manufacturers in industries such as aerospace and medical to achieve maximum productivity when performing face, slot and select plunge milling operations. Seco applied the latest design and grinding...

MC251 Solid Carbide Mill optimizes machining of stainless materials.

Being solid carbide milling tool, MC251 increases tool life by up to 50% in austenitic stainless steels and nickel-base alloys. Tool operates best on machines having external coolant supply. Product uses asymmetrical helix angles between 35° and 38° which results in low susceptibility to vibration thereby increasing process reliability. Minimizing build-up on cutting edge, unit is coated with...

Attrition Mill comes with capacities ranging from 75-120 TPH.

Suitable for disintegration of conglomerates, material separation, surface cleaning and polishing applications, Attrition Mill is efficient and simple in design. Mill’s tank and propellers are coated in urethane to endure beatings of tough sand cleaning. Mills have round tubs which are designed to eliminate swirling and corner material collection. Product has outside diameter of 54” and...

GF Machining Solutions to Spotlight High-Performance Medical Machining at MD&M West 2017

LINCOLNSHIRE, Ill., Nov. 28, 2016 - GF Machining Solutions will demonstrate several milling and EDM systems designed for high performance and productivity in medical machining applications at MD&M 2017 on February 7 - 9 at the Anaheim Convention Center, Anaheim, California. Visitors to the company’s booth 3501 will experience the Mikron HSM 200U LP (linear performance) milling machine, the...

A Reference Guide To Frequency Conversion Power Supplies For Industrial Applications

The purpose of this guide is to assist contractors and purchasing agents charged with writing specifications for, and/or procuring, frequency converters.

The Ironmaster

Kennametal's next generation face mill tackles the toughest cast iron applications with easeKennametal's Mill 16 has a wedge-style clamping system, numbered pockets and inserts, and an open pocket design to increase chip flow in heavy roughing Iron is the most abundant element on earth by mass. For over twenty-five centuries it's been used to plow fields, build bridges, cook food, and wage war....

KBDM PCD face milling system offers finishes of 2 to 3 ìm Ra.

Using fine-pitch aluminum body with wedge-style clamps and adjustable pockets, KBDM PCD face milling system is stocked in standard sizes of 2.5 - 8.0 in. (63 - 200 mm). Designed for high-volume machining, unit enables initial cutting speed of 3280 ft/min (1000 m/min) and feedrates of .004 in. per tooth (0.01 mm). With small diamond grains, KD1400 offers excellent chipping resistance. Using large...

Niagara Cutter Stabilizer 2.0 comes with advanced AlTiN coating.

Offering smooth and silent operation, Niagara Cutter Stabilizer 2.0 is capable of handling twice the chip load capacity than previous models. Including ST440.2 HT series for ISO-M and ISO-S materials such as stainless steel, titanium and high-temp alloys and ST430.2 series are designed for steels, alloy steels, cast iron. Boasting of new geometry to boost performance, end mills are offered in...

Solid-carbide End Mills with Smaller Neck Diameters Increase Application Range

TROY, Mich., November 3, 201 6 - The Jabro ® -Solid2 JS554 range of solid-carbide end mills gains further utility and versatility with smaller neck diameter options. These latest tools provide greater clearance when machining complex components, such as those found in aerospace, medical and general machining applications. Smaller neck dimensions make it easier to access parts clamped in...

Kruger Gears up to Launch Production of Linerboard on Time and on Budget at its Trois-Rivières Mill

TROIS-RIVIÈRES, QC, Nov. 3, 2016 - The No. 10 Paper Machine (PM10) rebuild project is proceeding on time and on budget, as revealed by Kruger Inc. during a press briefing held this Thursday, November 3, 2016, at the Trois-Rivières Mill. The Company offered a behind-the-scenes look at the construction site of this the large-scale project that represents 500,000 person-hours of work over 20...

High Temp Tough

WIDIA-'s new indexable milling grade is the first choice for titanium and other superalloys WS40PM-'s cobalt-rich substrate provides robust fatigue resistance and edge integrity, while the multiphase AlTiN-TiN PVD coating reduces tool wear, making it the first choice for a wide range of high-temp steel alloys, austenitic and PH stainless steels, nickel-based super alloys such as Hastelloy and...

Von Ruden's Driven Tools Are Built to Last

Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.