Vertical Machining Center features linear motors.
Model VL30-5X uses linear motors, rather than ballscrews, for increased acceleration and deceleration rates and overall contouring accuracy. It offers cutting feed rate up to 1,574 ipm with 1G acceleration/deceleration rate. X, Y, Z axes range is 200 x 300 x 200 mm. Up to 50,000 rpm spindles are offered. Machine provides 50 rpm in A-axis and 100 rpm in B-axis.
Read More »
Horizontal Machining Center allows feeds up to 48 m/min.
Targeted at high precision job shops, Model HW63A provides X, Y, Z axes envelope of 1000 x 800 x 800 mm and 40/30 hp spindle with 6,000 rpm. Glass scale feedback systems offer 0.001 mm resolution. Three-point leveling cast iron bed provides stiffness and rigidity, and dual ballscrews provide improved motion control and high axis thrust. Steel box slide ways feature G-II lubrication system that...
Read More »
HMC suits applications requiring heavy material removal.
Equipped with 50-taper, 4.33 in. dia, 6,000 rpm spindle, FH630R boxway machine has cast bed that incorporates 3-point support model for ease of installation and maintenance. Dual ballscrews and dual drives in each axis contribute to acceleration rates, reaching 1,890 ipm with acceleration of 0.5 G. G-II slideway rests each boxway guide on pressurized, micro-thin layer of lubricant. Dual Z-axis...
Read More »
Horizontal Machining Center optimizes non-cutting operations.
Designed with spindle that reaches full speed in 2.3 sec, FH-S Series also employs low-friction linear guides that rely on roller bearings and deliver vibration-dampening performance. Modular design accepts 15,000 rpm spindle, available in No. 40 or 50 taper sizes, or 6,000 rpm, No. 50 taper spindle. Equipped with Fanuc 30i CNC that adopts Field Bus network, machine acceleration is 1 G with...
Read More »
Health & Beauty Industry
Our latest eBook is a comprehensive guide to the health and beauty industry and keeps you up to date on the latest trends.
Read More »Horizontal Machining Center uses minimum quantity lubrication.
Near-dry Model RM80H features 80 mm diameter spindle capable of 8,000 rpm, and X, Y, Z axis travels of 20.8, 22.0, and 20.8 in., respectively. It provides deep hole drilling and rapid penetration up to 40 ipm, making it suited for forged steel and nodular iron crankshaft applications. System mixes air with fluid in spindle and applies droplets through tool to cutting surface. No more than 2 oz of...
Read More »
Vertical Machining Center operates at 10,000 rpm.
Model VX650 offers X, Y, Z travels of 55, 26, and 25 in. with rapid traverses of 1,575, 1,575, and 1,181 ipm. Four-slideway structure in Y axis provides stability for heavy duty machining. Available with BT or CAT 40 tool shank, machine includes 20-tool ATC, centralized Fanuc 0IMB controller, and 63 x 25.6 in. table with load capacity of 2,866 lb.
Read More »
Horizontal Machining Center provides high speeds.
With rapid traverse rate of 1,969 ipm, HX630 combines max work area of 39.37 high x 36.6 in dia with respective X, Y, and Z traverses of 41.3, 34.4, and 34.4 in. Machine has cutting feed rate of 1,969 ipm and spindle speed of 8,000 rpm. Standard configuration includes Fanuc 18iMB controller. Wedge-type mechanism produces 4,630 lb of pull stud retention force, while CAM-type ATC system minimizes...
Read More »
Horizontal Machining Center is driven by 2-step gearhead.
Model HX400 employs rotary-type auto pallet changer and fixed-address ATC that holds 40 tools. Tool change takes 1.3 sec, and balanced spindle structure, supported by rugged box-way design, enables machine to obtain stable accuracy during heavy-duty machining. Features include dual internal screw conveyors, idle station that rotates freely with pin-lock cylinder at 90Ã-
Read More »
Vertical Machining Center provides high productivity.
Hi-Center V50D features traveling column design and centralized chip collection. Fanuc Series 0iMA controller has 8.4 in. color LCD, 2,100 ft memory, and preview control with 15-block look ahead. Quick pallet change and rapid traverse rates of 1,575 ipm minimize non-cut time, while 20 hp spindle motor generates 211.2 lb-ft torque at 8,000 rpm. APC design is such that only rotary motion of table...
Read More »Machining Center offers automatic operation.
Designed for work pieces up to 20 mm in dia, NN-20YB employs main spindle powered by 5 hp motor that delivers speeds from 300-10,000 rpm, and 3 hp back spindle that ensures precision cutting. Main tool post features 6 turning tools, 7 spindle tools operating at 2 hp, and 4 frontal drills, while back tool post accommodates 2 turning tools, 2 live spindles operating at 2 hp, and 3 frontal drills....
Read More »
Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »
