Machining Centers provide high-speed metal removal.
Millac 44V and 44H Vertical and Horizontal Machining Centers feature flame-hardened box ways, 10-tool magazine, and spindle speed of 12,000 rpm. Millac 44V offers X, Y, Z travels of 22.05, 16.14, and 16.14 in., respectively, while Series 44H features X, Y, Z travels of 16.14, 18.11, and 18.50 in. Suited for large complex part production, Model VTM-80YB provides vertical turning and milling in 5...
Read More »EDM Machines/VMCs suit surface finishing applications.
Wire EDM Model FA10S features programmable flushing system, fine finish power supply, and non-isolated workpiece table. Sinker EDM Model EA12V includes multi-position work tank, which allows operator to set up while circulating dielectric fluid. ESPER II software offers multiple programs for measuring, power settings for burning, and orbital data for finishing. High-speed Model HC-658 VMC...
Read More »
High-Speed VMCs are suited for mold industry.
Featuring cast-iron construction, VM-2 incorporates linear guides on all axes, brushless servos, fine-pitch ballscrews, and digital encoders. It uses 12,000-rpm, 40-taper, inline direct-drive spindle powered by 30 hp vector dual drive system. With max weight capacity of 3,000 lb, 36 x 18 in. table features T-slots in vertical and horizontal directions. Features include 30 x 20 x 20 in. work cube,...
Read More »
HMC is suited for space-restricted applications.
Featuring built-in tombstone indexing capabilities, EC-300 HMC utilizes 8,000 rpm, 40-taper spindle directly coupled to motor. Unit incorporates servo-driven, twin 300 mm pallet changer that swaps pallets in under 5 sec as well as 45Ã-
Read More »
Choosing an Optimal Riot PPE Supplier: 5 Key Factors
This ebook provides 5 key factors to choosing an optimal riot PPE supplier.
Read More »
Horizontal Machining Center incorporates 40-taper spindle.
Horizontal Center Nexus 5000 features 40 hp, 18,000 rpm spindle as standard equipment. Spindle acceleration reaches 18,000 rpm in 3.8 sec. At 91.7 in. wide, rapid-traverse rates in X, Y, and Z are 2362 ipm, and acceleration is 0.8 G. Maximum workpiece size is 31.5 x 39.4 in. The 400 mmÃ-² pallet indexes 90Ã-
Read More »
Machining Center features inline direct-drive spindle.
Featuring 32 x 20 x 28 in. work cube, HMC Model EC-500 includes dual pallet changer with 500 mm pallets and indexer that provides 45Ã-
Read More »
Vertical Machining Center targets mold making industry.
Featuring 30 x 20 x 20 in. work cube, Model VM-2 is equipped with 12,000 rpm, 40-taper spindle that uses inline direct-drive system, which couples motor directly to spindle rather than using belts. Measuring 36 x 18 in., cast-iron table includes standard T-slots in vertical and horizontal directions and maximum weight capacity of 3,000 lb. Side-mount tool changer holds 24 tools plus 1 in spindle....
Read More »Vertical Machining Centers utilize CAT-V 50-taper spindle.
Models VMC1250II-HT/50 and VMC1500II-HT/50 incorporate side-mount, swing arm, automatic tool changer with capacity for 24 tools and Fanuc Oi-MC control with swing-out pendent. Spindle with ZF planetary gearbox provides 347 lb-ft torque rating at 375 rpm base speed. Its 25 hp spindle drive delivers speeds up to 6,000 rpm. With respective X- axis travels of 50 and 60 in., VMC1250II-HT/50 and...
Read More »
CNC Machining Center features center drive operation.
FAST CUT Model FC-SB10 utilizes two 2-axis turrets and one spindle with 2 collets driven in center by one servo motor, allowing different cutting operations to be performed simultaneously on both ends of cylindrical part. Tailstocks and spindle extensions permit machining of parts from 3-19 in. long. Capacities range from 3/16-2 5/8 in. dia and maximum turning length for each turret is 8 in. With...
Read More »
CNC Multi-Tasking Center produces chucked workpieces.
Multiplex Triple 8200Y features 2 horizontally opposed, 8 in. chuck headstocks with 12-tool turret for each side and lower turret with 9 tools that can work with both headstocks. Latter also provides 5 hp, 4,500 rpm milling spindle. Opposing spindles can be synchronized and simultaneously clamp long shaft workpiece for turning, milling, drilling, tapping, or Y-axis machining. Rapid traverse rates...
Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.
Read More »
