New Laboratory and Research Supplies and Equipment Products

W-LAN Receiver System utilizes PocketPC-® environment.

Yellowjacket(TM) 802.11a Wi-Fi Analysis Tool works with Compaq's iPAQ PocketPC for sweeping, analyzing, and optimizing 5 GHz Wireless Local Area Networks. Calibrated receiver measures all 12 OFDM network channels operating on IEEE 802.11a standard, allowing users to determine Access Point, Packet Error Rate, SSID and RSSI signal levels of all access points, and NIC Client cards on or off network.

Electronic Balance offers simple, 2-button operation.

Portable Scout(TM) Pro provides multiple application modes including parts counting with auto optimization, percent weighing, and specific gravity calculation. Weighing units include g, kg, oz, lb, lb:oz, oz t and dwt. Capacities and readabilities range from 200 g x 0.01 g to 6000 g x 1 g. Totalization feature allows repeated summing to limit of display. Sealed front panel, molded spill ring, and...

Electronic Balance features intuitive man/machine interface.

Precision Adventurer(TM) Pro features capacities and readabilities from 51 g x 1 mg to 8100 g x .1 g. Application modes include weighing, animal weighing, parts counting, percent weighing, check weighing, and totalization. Features include up-front leveling system, RS232 connectivity, GLP Data capabilities, 4-button operation, and 2-line backlit display. Balance allows simultaneous viewing of...

Precision/Analytical Balances have six application modes.

ExplorerÃ-® Pro balancers provide backlit dot matrix display, intuitive man/machine interface, and AutoCal(TM) feature. Units also include up-front leveling system, RS232 connectivity, and GLP Data capabilities. Analytical balances are available in capacities and readabilities ranging from 62 g x 0.1 mg to 210 g x 0.1 mg, while Precision models range from 210 g x 0.001 g to 8,100 g x 0.1 g....

How to Reduce Costs for Plastic Caps, Closures and Other Packaging Products

Check out this white paper to read about the six questions to consider before selecting an injection molder for your packaging application.

RF Impedance/Material Analyzer utilizes one test head.

With temperature-characteristic test kit, E4991A measures permittivity and loss tangent of dielectric materials and permeability of magnetic materials. Test kit allows manufacturers to evaluate performance over temperature range of -55 to +150Ã-

In-Line pH Analyzer uses non-glass probes.

Waterproof Series IQ500 processLab(TM) accepts silicon chip sensor probes as well as glass sensor probes. Designed for in-line continuous process monitoring applications, unit features 4 relays that can be set for ON/OFF, Pulse Length, Pulse Frequency, or Alarm mode and four 0/4-20 mV optically isolated, analog outputs that can be driven by pH, mV, or temperature. Large 5 Ã-½ in. backlit LCD...

Centrifuge System cleans oil to extend engine life.

ROC 5 Envi-ro-fuge System utilizes centrifugal force of over 2,000 G to remove contaminants as small as 0.5 microns. When oil change is required, cleanliness of used oil makes it recyclable. Product takes out abrasive grit, soot, and dirt, and spins them into solid cake that is removed without shutting down operation. By-pass system allows for retrofit installation for engines, generators, pumps,...

Drawdown Columns check flow rate of metering pumps.

Calibration Columns measure drawdown rate on suction side while leaving discharge undisturbed in normal steady state operation condition. Products can also be used to determine if check valves are worn or dirty. Available in capacities from 100-4,000 ml, products are suited for use with pump capacities up to 120 gph. Constructed of PVC, units have slip-on top caps for filling and cleaning....

Laser Energy Probes have large surface areas.

Multi-kilowatt, water-cooled Models PM1K-100, PM3K-100, and PM5K-100, with 100 mm diameter surface area, and Model PM5K-200, with 200 mm diameter surface area, measure energy output of diode laser bars, large cross-section laser beams, diode laser arrays, and high-divergence laser beams. Probes measure output of lasers ranging from 0.19-11 Ã-µm with 1 W power resolution. Devices feature...

Compact Slides have internal shock pads.

Series SxL and SxH Slides are available in 2 bearing types and sizes of 8, 10, 14, 20, and 32 mm with travel lengths up to 3 in. Units incorporate twin switch slots for flush installation of company's Series 6790 Switches. They are available in imperial and metric versions with internal shock pads to reduce noise and end-of-travel impact, low breakaway piston and rod seals, and tapped or...

Micro Air's Dust, Fume, Mist Collection Equipment Facilitate a Safe Work Environment

Dust, fume, and mist collectors from Micro Air promote a safer, more productive work environment. Our wide array of products are available to the industrial manufacturing sector for processes such as welding, cutting, grinding, blasting, and more. Check out our video to learn more.