HP-TGA 750 Analyzer features ultra-high resolution magnetic suspension balance.

HP-TGA 750 Analyzer features ultra-high resolution magnetic suspension balance.

HP-TGA 750 High Pressure Thermogravimetric Analyzer is designed with temperature control system, low volume environmental chamber and non-porous isolation material. Unit is optimized to test samples at high pressure levels. Featuring high pressure sample chamber, an integrated gas dosing, gas blending and pressure control system with automatic gas switching and a touch-screen, analyzer is used...

Read More »
Tough Multipurpose Polycarbonate Enclosures

Tough Multipurpose Polycarbonate Enclosures

August 8, 2017 – Super tough, STI’s Polycarbonate Covers help prevent theft and vandalism to larger keypads, access controls, volume and lighting controls, and much more. Extremely difficult to break, these clear (or white) polycarbonate covers are molded from the same material used in football helmets. Covers increase the life and reliability of units by protecting them from accidental or...

Read More »
Chlorine Dioxide Analyzer Offers Accurate Monitoring with No Reagents for Low Life-Cycle Costs

Chlorine Dioxide Analyzer Offers Accurate Monitoring with No Reagents for Low Life-Cycle Costs

Water Disinfection, Effluent Treatment, Pulp Bleaching, Cooling or Rinse Water Delivering high accuracy and reliability, the CD80 Chlorine Dioxide Analyzer from Electro-Chemical Devices (ECD) provides process engineers responsible for municipal and industrial water treatment systems with an easy-to-install, high performance and low maintenance solution to measuring Chlorine Dioxide (ClO2) for...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Focus S 70 Laser Scanner is IP54 rated.

Focus S 70 Laser Scanner is IP54 rated.

Focus S 70 Laser Scanner is used in high particulate, wet weather conditions and HDR imaging. Unit is designed for indoor and outdoor applications which requires scanning up to 70m and provides accuracy of ±1mm. Product offers acquisition speed of 1,000,000 points per second and enables the users to transfer the 3D scan data wirelessly to an onsite computer workstation/PC directly.

Read More »
Into-N2 High Pressure Cassette

Into-N2 High Pressure Cassette

New 13,500 SCF N2 Cassette, built and shipped-tested for 4 days at burns machinery prior to shipment. This cassette held enough N2 for a full days laser cutting without turning on the generator. 99.99% purity all the time. This is a winner. Contact: INTO-N2 2554 Business Parkway, Minden, NV 89423 Phone: 775-267-3035 Fax: 267-2585 www.inton2.com

Read More »
Potentiometric Titrator comes with RS-232 cable.

Potentiometric Titrator comes with RS-232 cable.

AQUACOUNTER® COM-300A Potentiometric Titrator can store up to 50 results in memory or download results to a laptop. Unit executes pH, acid/base, complexometric, redox, Karl Fischer, photometric, non-aqueous titrations and Ion-Selective Electrode measurements. Product comes with downloadable software and optional volumetric Karl Fischer Kit. COM-300A is used to measure moisture in range of 100ppm...

Read More »
Solder-Side Covers are offered in solid or perforated options.

Solder-Side Covers are offered in solid or perforated options.

Solder-Side Covers are designed for 3U and 6U Eurocard PCBs. Units can be mounted on OpenVPX, CompactPCI, and VME/64x boards. Covers are offered in 3U x 160 mm and 6U x 160 mm standard sizes and also available for 80 mm Rear Transition Modules (RTMs) and 220 mm boards. Units with 0.5 mm and 0.3 mm versions can withstand temperatures of up to 120°C and 65°C respectively.

Read More »
R220.88 Face Milling Cutter features inserts with eight cutting edges.

R220.88 Face Milling Cutter features inserts with eight cutting edges.

R220.88 Face Milling Cutter is compatible with SNMU inserts which are fastened with center lock screw. Unit is designed for roughing and semi-finishing applications. Product’s body is made of Idun material and offered in diameters ranging from 2.00 in. to 6.00 in. with size 12 insert and 3.00 in. to 6.00 in. with size 16 insert. Equipped with wiper flat, cutter’s body offers 88-degree lead...

Read More »
Dissipative Rubber Worksurface Mat meets ANSI/ESD S20.20 standards.

Dissipative Rubber Worksurface Mat meets ANSI/ESD S20.20 standards.

SCS R3 Series Dissipative Rubber Worksurface Mat is available in rolls and mat kits. Compatible with workstation monitors, unit is resistant to solvents, hot solder and soldering irons. Table mat is offered in 24 in. x 48 in. size whereas roll mat kit comes in 24 in. x 50 ft, 30 in. x 50 ft, 36 in. x 50 ft, 48 in. x 50 ft size. Both products come in light blue, gray and green colors. Worksurface...

Read More »

All Topics