Heaters

QED Connect Inc.'s Joint Venture Partner, Sofame Technologies, Inc. Backlog of Confirmed Orders Reach $1.7 Million

QED Connect Inc.'s Joint Venture Partner, Sofame Technologies, Inc. Backlog of Confirmed Orders Reach $1.7 Million MANCHESTER, N.H. - QED Connect Inc. (OTC: QEDN), a New York Corporation ( QED Connect"), today announced that its Joint Venture partner, Sofame Technologies, Inc. ("Sofame Technologies")(TSXV: SDW), a leading manufacturer of environmentally efficient industrial water heaters and cost...

Read More »
Crystal Lagoons Presents at Power-Gen Innovative Sustainable Cooling Technology
Coolers

Crystal Lagoons Presents at Power-Gen Innovative Sustainable Cooling Technology

- Globally patented technology with high environmental impact for the power generation industry, will be exhibited at the most important energy fair in US. - Sustainable cooling technology that eliminates marine pollution, by creating a closed circuit cooling system that brings economic advantages and energy efficiency , and has already 19 projects in the pipeline in countries such as Finland,...

Read More »
Heaters

Electric Panel Heater features explosion-proof design.

CCSAUS-certified for Class I, Divisions 1/2, Groups A/B/C/D hazardous locations, Norseman(TM) XPA is available in 120, 208, and 240 V configurations and suited for 50/60 Hz. Extruded convector assembly comes in 2 sizes, providing safe, efficient heating from 75-700 W, and explosion-proof junction box and pre-set nonadjustable thermostat are standard. Heater can also be supplied with optional...

Read More »
SchmartBoard Adds DFN Boards to "EZ" Solder SMT to DIP Lineup
Surface Mount Components

SchmartBoard Adds DFN Boards to "EZ" Solder SMT to DIP Lineup

Now DFN Components Can Be Used on a Breadboard San Ramon, CA - SchmartBoard, a company that makes prototyping electronic circuits easier, has expanded its product offering with a new family of products that support the use of Surface Mount Technology (SMT) components with breadboards. Schmartboard has released two new SMT to DIP adapters that use the patented ez" technology, which makes soldering...

Read More »
Heaters

Water Heater uses coil, direct-fired heating technologies.

Designed to heat large volumes of water for ready-mix concrete plants, 3 million BTU/hr Sioux Hybrid Water Heater(TM) achieves 208°F outlet temperature at 95% + true efficiency. Media section promotes efficiency, while coil section allows heater to reach elevated temperatures without discharging steam from exhaust stack. Built to ASME Code, water heater ships complete with no assembly...

Read More »
Smoke and Fume Extractors

Weld Fume Extractors range from 2,000-12,000 cfm.

Available in 5 models, FILTAIR Industrial Centralized Weld Fume Extraction Series is customizable to variety of welding cells and applications. Units combine TruLock(TM) Filter technology with MERV 15 nanofiber filter pack to capture up to 95% of particles ranging from 0.2 to 1 micron. TruLock technology uses surface webbing of small fibers to capture weld fumes on surface. To extend filter pack...

Read More »
Munters Brings to Light Humidity Control Solution for Photonics Lab at Sydney University
Controls and Controllers

Munters Brings to Light Humidity Control Solution for Photonics Lab at Sydney University

At the interdisciplinary Photonics Laboratory (iPL) operating in Australia's Sydney University Madsen building, world leading research is undertaken in Photonics - technologies that use light to transfer information from one place to another. Each room and laboratory in the Madsen Building is individually served by VRF ducted fan coil units. Outside air is supplied by a common mechanical ducted...

Read More »
Controls and Controllers

Siemens Awarded Power Plant Order from Singapore

Siemens has received an order to supply the power block and other main components for the new combined-cycle power plant (CCPP) in Singapore. As part of the largest seawater desalination facility Tuaspring in Singapore, the plant will deliver around 411 megawatts (MW) of environmentally friendly electricity. Tuaspring is scheduled to go online in 2014. Purchaser is Hydrochem (S) Pte Ltd., a...

Read More »
Publishing Plant Save Energy, Water with Munters Oasis IEC Units
Water Treatment Equipment

Publishing Plant Save Energy, Water with Munters Oasis IEC Units

Largest IEC Project in State Four indirect evaporative cooling (IEC) units were recently installed at the California Department of General Services, Office of State Publishing in Sacramento - making it the largest IEC project in the state. The Munters Oasis(TM) IEC modules, with a total air flow capacity of 354,000 cubic feet per minute (CFM) and a sensible cooling production of over 704 tons of...

Read More »
Heating and Cooling Systems offer 50-600°F temperature range.
Heaters

Heating and Cooling Systems offer 50-600°F temperature range.

Heat transfer fluid-based Full Range systems, combined with chiller, deliver respective heating and pumping capacities to 48 kW and 30 gpm. Capable of heating from 50 to 600°F, self-supporting unit incorporates microprocessor-based controller with LCD readout, green-friendly refrigerant, and continuous flow cool oil reservoir. System provides heating and cooling in one package, meets NFPA...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers