Rosenberg High-Efficiency Radial Fans for 1.5-Ton to 15-Ton Evaporator Applications Now Available for Immediate Shipment from Rosenberg USA, Inc.
Rosenberg USA's Charlotte-area warehouse now stocks a wide selection of DRAD Series fans ranging from 7” to 12” impeller diameter offering airflow rates up to 5,600 CFM at 1 inch of static pressure. A full line of accessory products and controls are also available. CHARLOTTE, N.C - JANUARY 15, 2018 - A complete line of high efficiency radial fans ideal for use in wall mount air...
Read More »
Vacuum Blowers are equipped with hermetic drive.
Vacuum Blowers offer vacuum range of 200 bis 10-5 mbar and are equipped with one or two backing pumps. Units are integrated with motor and are available in HM construction for neutral gases in 9 sizes. Products offer intake volume flows from 406 to 15,570 m³/h and are suitable for chemical and process engineering, foil and glass coating, evacuation of hydrogen and helium leak detection system...
Read More »
Delta G5 plus Displacement Blowers use class IE3 motors.
Delta G5 plus Displacement Blowers offer intake volume flows of 30 to 15,000 m3/h at a control range of 25 to 100 %. Units can operate up to pressure of 1,000 mbar and feature intake filter silencer. Products are suitable for water and wastewater treatment, aeration, filter backwash, pneumatic conveyance, gas conveyance, degassing or dedusting applications. Blowers are equipped with electrical...
Read More »Aerzen USA Process Gas Blower and Compressor Installations Worldwide
Aerzen has successful process gas installations in a large variety of applications around the world. The new Process Gas Overview video showcases the various technologies, applications and equipment that Aerzen produces on a global basis. The overview provides a quick view into what it takes, from concept to installation, of a process gas package. AERZEN offers the process gas and refrigeration...
Read More »
Copper Infiltration Using Wrought Wire Infiltrant - Process and Productivity Improvements for Automotive Components
A comprehensive exploration of a new wrought copper alloy wire used in powder metallurgical infiltration methods.
Read More »
LW-300 and LW-400 Linear Blowers meets IP54 protection class approval.
Measuring 365 mm x 216 mm x 220 mm, LW-300 and LW-400 Linear Blowers are 230V 50Hz oil-less dual drive linear unit high output blowers. Providing high output open flows up to 625 l/min, unit enables flows at rated pressure of 350 l/min at 200 mbar and 425 l/min at 200 mbar respectively. Including drive unit direct cooling, diaphragm protection switches, thermal protectors, and internal fuses,...
Read More »
Ion Air Jet offers easy installation using 1/8 NPT male inlet.
Using small amount of compressed air to entrain 80 percent of the total output airflow from the surrounding room air, Ion Air Jet minimizes compressed air use and maximizes ionized airflow. With positive and negative ions capable of neutralizing high static charges, unit’s electrically energized emitter at the discharge end fills the entire airstream. Available with permanent mount or flexible...
Read More »DBS Screw Blowers monitors all on board sensors.
With an Ethernet port and built-in Web-server, Sigma Control 2 enables remote monitoring and email notifications for service and alarms. Providing communication interfaces such as ModBus, Profibus, Profinet, and Devicenet, unit provides seamless integration into plant control/monitoring systems such as Kaeser's Sigma Air Manager 4.0. Available with motor sizes from 20 to 50 hp and flows from...
Read More »Greenworks Commercial Launches Dedicated Line of Battery-Powered Outdoor Power Equipment for Landscaping Professionals
82-volt battery technology provides best-in-class power and run-time CHARLOTTE, N.C. - Greenworks Commercial, leaders in battery-powered outdoor power tools for landscaping professionals, announced today that it has launched a dedicated line of commercial tools specifically engineered to meet the demanding needs of professional landscapers. Powered by 82-volt battery technology, the complete line...
Read More »
Motorized Blower operates smoothly and with minimal noise.
Available in single- or 3-phase voltages and 500–5,000 cfm capacities, TCC Motorized Blower combines flange mounted scroll housing with TMK Motorized Impeller to optimize air performance and minimize sound levels. Precision balanced air-moving package, optimized for smooth operation, has steel housing with corrosion-resistant epoxy coating; speed-controllable external rotor motor; and BC...
Read More »
Anti-Static Air Gun carries CE, UL, RoHS certifications.
Ion Air Gun removes static electricity, contaminants, and dust from parts. Along with metal-armored, high-voltage cable, features include replaceable emitter point, integrated ground connection, and electromagnetic shielding. Shockless product neutralizes static electricity and cleans at distances up to 15 ft; high-velocity air jet uses compressed air to entrain 80% of total output airflow from...
Read More »
Aerzen USA Process Gas Blower and Compressor Installations Worldwide
Aerzen is firmly established as a global leader in compressed air, gas, and vacuum solutions. Our reputation as an industry leader is built on consistently delivering innovative products that are at the cutting edge of technology. To learn about the industries finest blowers and oil-free and oil-injected screw compressors, see our video.
Read More »
