New Generators Products

Clock Multiplier provides jitter less than 60 psec.

Supplied in 20-pin TSSOP, CDCE706 integrates 3 on-chip PLL components that can accept crystal, LVCMOS, or differential input and generate 6 clocks from one clock source. Its 6 outputs can be programmed in-circuit or during operation for clock frequencies up to 300 MHz, minimizing EMI. Product integrates on-chip EEPROM technology, 2-wire SMBus interface, and programmable spread spectrum clocking....

Data Generator offers stimulus capability to 13.5 GHz.

Serial Pulse Data Generator, Model 81142A allows engineers to conduct physical layer tests by providing high-precision, low-jitter signals. With data formats of RZ, R1, and NRZ, system provides programmable pattern and sequence generation for entire range of digital high-speed serial buses. It offers linear delay modulation up to 1 GHz for jitter-tolerance testing, and remote programmable...

Waveform Generator/Synthesizer has customizable command set.

Instruments GP1665W and GP1665H utilize Direct Digital Synthesis (DDS) for stability and accuracy over 10 Ã-µHz to 50 MHz frequency range. They feature amplitude and frequency modulation capability; precision trigger, gate, and burst modes; and linear or logarithmic sweep capability over 3 decades, with sweeps down to 1 Ã-µHz. Customization of command set firmware ensures GPIB command set...

Waveform Generators operate at 125 MS/s.

Combining universal generator and synthesizer, single-channel Model 396 and dual-channel Model 397 include 11 basic waveforms with adjustable parameters accessible from front panel. With 14-bit resolution, units provide 16,384 output levels, allowing video or other complex waveform to be generated with small details superimposed on large signals. Memory in both models can be divided into as many...

Avoid Pressure Equipment Failure

This eBook gives a guide on how to prevent pressure equipment failure.

Universal Waveform Generators test electronic circuits.

Available with 1, 2, or 4 independent or linked channels, 28x series employs direct digital synthesis generator with variable clock sampling technology to reproduce waveforms at any repetition rate. This 40 MS/s generator series comes with Waveform Manager Plus software and is designed for low-frequency manufacturing and service applications. Signal simulation capabilities include arbitrary...

Logic Analyzer/Signal Generator includes oscilloscope.

Used for testing and controlling electronic circuit designs, USBee AX Test Pod verifies analog voltage levels and digital logic, generating visual representation of signals. Unit relies on USB 2.0 bus to turn existing PC into oscilloscope, logic analyzer, and digital signal generator. Able to stream data to and from PC, device performs all triggering and data storing. For elaborate testing,...

Function Generator is designed for 50 MHz audio applications.

Model 80 combines function generator, linear and logarithmic sweep generator, and phase lock generator capabilities with dc output. With built-in counter/timer control that detects external reference frequencies when in PLL operating mode, Model 81 provides function generator, pulse generator with timing control, and phase lock generator. Function generators are designed for bench test...

Arbitrary Waveform Generators are suited for PCI platform.

CompuGen 11G, CompuGen 4300, and CompuGen 8150 are 1-, 4-, and 8- channel arbitrary waveform generator cards that offer 12-bit resolution at D/A conversion rates to 150 million, 300 million, and 1 billion conversions/sec, respectively. Products can provide aperiodic analog waveforms by creating digital representation of waveform in on-board memory (standard of 4 MS). This digital pattern is then...

Function Generator offers arbitrary waveform capabilities.

Generating standard and arbitrary waveforms using direct digital synthesis, 10 MHz Model 271 offers modulation capabilities including sweep, AM, gating, trigger/burst, FSK and hop. Unit includes storage for 5 user-defined waveforms and is suited for general-purpose test or bench troubleshooting applications.

Charging Generators suit static charge pinning applications.

Offering choice of constant current or constant voltage operation, single-polarity Electrostatic Charging Generators are suited for card insertions, chill roll edge pinning on cast film lines, in-mold labeling, roll transfer, lamination, and shrink wrapping. Fully integrated, black box Model 7020 is controllable by PLC using analog I/O connection. In addition to remote I/O, Model 7220 provides...

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.