Analog Output Board suits PCI-based computers.
Model OMB-DAQBOARD-2004 offers four 16-bit 100 kHz analog outputs ranging from -10 to +10 V. Through use of Bus Mastering DMA, each D/A output can continuously output waveform, which can be read from PC RAM or file on hard disk. Program can asynchronously output value to either D/A for nonwaveform applications if D/A is not already being used in waveform output mode. Additional D/A channels can...
Read More »
PCI Cards are compatible with old and new PCs.
Universal voltage, ARCNET PCI20U network interface modules are compatible with 3.3 V and 5 V computers. Six models link PCI and PCI-X bus compatible computers with ARCNET LAN. Units allow for jumperless configuration and plug-and-play functionality. Each 32-bit, 33 MHz bus card operates with NDIS driver or null stack driver in Windows environment. Two LEDs monitor network operation and bus access...
Read More »
Digital Power Controller speeds product development.
Power, control, and data interfaces of MultiDriver(TM) Board provide integrated system for digital controller development. Switching power stage accepts 12-48V supplies and provides 6 A half-bridge or 3 A full-bridge output current. FlexController(TM) SOC allows verification of control algorithms through PC with FTview(TM) software. Data communication is through FlexBus(TM) isolated multi-drop...
Read More »
Analog Input Card offers 30 MS/s sampling rate.
High-speed, Model PCI-1714 streams continuous data from analog samples to host memory. Simultaneous sampling is provided on all 4 input channels through dedicated A/D converters. Trigger modes include software triggering, internal and external pacer triggering, post trigger acquisition, delay trigger acquisition, and pre-trigger acquisition. Card includes software for auto calibration, so no...
Read More »Bearing Solutions for Machine Tool Applications
An in-depth overview of the types of bearings used in machine tool applications. Check out this eBook to learn more.
Read More »
Data Acquisition Module suits industrial applications.
PCM-ADIO single board, PC/104 data acquisition module combines 32-channel, 16-bit A/D converter; 4-channel, 12-bit D/A converter; 16 lines of digital I/O; and event trigger control. Onboard microprocessor controls input and configurations, conversion rates, FIFO depth, output ranges, calibration, and digital I/O settings without use of jumpers or potentiometers. Automatic conversion rate is...
Read More »
PCI Boards simplify general-purpose data acquisition.
Complete with 256-position A/D channel/gain queue, Models RCP 1612 and 3212 store up to 2,048 samples in on-board FIFO buffers. Three 8-bit digital I/O ports can be configured as inputs or outputs, and support hardware handshaking, strobe I/O, and bi-directional protocols. Each board includes six 16-bit counter/timers. Two are used internally; 4 are available to measure frequency, count events,...
Read More »
Single Board Computer suits space-restrained applications.
QCard expandable embedded controller consists of 2 x 2.5 in. SBC that incorporates up to 1 MB of memory, communications capabilities, and expansion I/O bus. Powered by 16 MHz Motorola 68HC11F1 microprocessor, controller also features 512K Flash, and 128-512 K RAM, and 320 bytes EEPROM. On-board I/O includes 8 digital I/O lines with counter/timer capabilities, 8 analog inputs, synchronous SPI...
Read More »
Digitizers integrate pre- and post-trigger capability.
Dual-channel Models ATS1250 and ATS1220 are 12-bit PCI waveform digitizers for ultrasonic imaging and inspection, shock and vibration, and scientific applications. ADC and ASoPC technologies provide 60 dB signal-to-noise ratio. Units provide independently programmable inputs from Ã-
Read More »
Communication Module provides 8 RS-232/422/485 ports.
MultiComm(TM) serial controller module delivers 8 independent asynchronous serial channels, 10 Mbps Ethernet, and 2 CAN ports for embedded PC/104 computer systems running WindowsÃ-®, LinuxÃ-®, and real-time operating systems. Serial ports, 16C550C-compatible, operate at up to 921.6 kbps and are configured in pairs as 8 RS-232 or 4 RS-232 and 4 RS-422/485 ports capable of controlling up to...
Read More »
PC-104 Board features optically isolated I/O.
Model 104-IDIO-16 is a 32-channel PC-104 utility board featuring 16 optically isolated input and 16 optically isolated solid-state outputs. Non-polarized inputs may be driven by dc sources of 3-31 V or ac sources at frequencies of 40 Hz to 10 KHz. Models are available with or without input change-of-state detection. Input channels have 34-pin IDC-type header. Outputs drive up to 1 A each and are...
Read More »
ISO-Certified Plastic Injection Molding from Rodon
The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.
Read More »
