Electronic Boards

PCI Board supports CANbus connection.
Electronic Boards

PCI Board supports CANbus connection.

CAN-PCIL(TM) consists of non-intelligent, short form-factor, PCI board that is available in single- or dual-channel versions. Acting as CAN interfaces for PCI systems, product is available with CANopen software support and optional opto-isolation. Product supports Linux and Windows operating systems, has 3.3 and 5 V PCI interface, and occupies one slot.

Read More »
Adapter Board adds DVB-T reception to analog TV.
Electronic Boards

Adapter Board adds DVB-T reception to analog TV.

MicModule allows TV manufacturers to add digital terrestrial video broadcast functionality to existing analog chassis. It is equipped with universal tuner and can be directly connected to any VHF/UHF input. MicModule uses DRX 8872C DVB-T COFDM demodulator IC and MDE 9515B digital audio, video, and graphic controller IC for decoding and processing of digital MPEG-2 signal. CI slot supports major...

Read More »
Digitizer PCI Card has 8 high-speed A/D channels.
Electronic Boards

Digitizer PCI Card has 8 high-speed A/D channels.

UltraFast UF3132 provides 8 analog input channels on one card; up to 16 cards can be combined in industrial PC. Product employs eight 12-bit A/D converters with max sampling rates of 25 MSamples/sec, provides simultaneous sampling, and has up to 256 MSample onboard signal memory. Each channel has 8 software-selectable input voltage ranges from Â-

Read More »
Instrument Controller features touchscreen-operated GUI.
Electronic Boards

Instrument Controller features touchscreen-operated GUI.

QScreen Controller(TM) is a C-programmable embedded computer powered by HC11 Motorola microprocessor. It features real-time multitasking operating system, hundreds of pre-coded device drivers, up to 1 M Flash, and 512 K RAM. Controller commands eight 8-bit A/D lines, 8 digital I/O lines, and 2 RS232/485 ports. It can host up to 7 stackable Wildcard(TM) I/O modules. Applications include scientific...

Read More »
Electronic Boards

Digital I/O Boards offer 32-64 channels.

Series 1700 PCI Cards feature isolated digital input and output channels with protection up to 2,500 Vdc. All outputs keep last values after hot system reset and provide channel-freeze function that keeps current output status unchanged for each channel during operation. Most boards support Board ID function, which helps engineers identify and access each card during hardware and software...

Read More »
Telecom Blade is based on PowerPC 750FX processor.
Electronic Boards

Telecom Blade is based on PowerPC 750FX processor.

Katana(TM) 750v cPSB blade features 2 PTMC sites, 5 Ethernet channels, and CTBus/H.110 TDM interconnect. Unit combines 800 MHz processor with Marvell MV64360 system controller, which provides high-speed access to as much as 1 GB SDRAM and 128 MB of flash memory. PTMC sites, which support 32-bit PCI data transfers at 33 MHz or 66 MHz, are equipped with dedicated CTBus and RMII interfaces. Blade's...

Read More »
PC Board offers gigabit speed communication.
Electronic Boards

PC Board offers gigabit speed communication.

Compatible with PCI bus configured PCs, Gigabit Fibre Channel (ANSI X3.230) Board enables communication at gigabit speeds for fiber optic and copper cable applications. It incorporates TLK1501 bi-directional, serial, point-to-point transceiver chip. Balanced, twisted pair Fibre Channel copper cables can be used for runs up to 200 m, and runs to 2 km are possible with fiber optic cables. Compact...

Read More »
PCI Cards feature 4096 Mbit on-board signal memory.
Electronic Boards

PCI Cards feature 4096 Mbit on-board signal memory.

Supporting all logic families, Ultrafast UF7221 full-length PCI card provides maximum output rate of 40 MHz on 32 digital channels. Each 4 bit (nibble) can be programmed with different high and low output levels from -2 to +10 V in 10 mV increments to generate ECL, PECL, TTL, LVDS, LVTTL, CMOS and LVCMOS signals. Output rate of signals can be programmed from DC to the 40 MHz max output rate. A 6U...

Read More »
Electronic Boards

Serial Port Board enables embedded system communications.

Emerald-MM-Opto PC/104 module offers 4 optically isolated serial ports with RS-232, RS-422, and RS-485 protocols, each of which is independently configurable for protocol and IRQ settings. Available in 2- or 4-port configurations, unit includes 24 digital I/O lines with programmable direction and user-configurable pull-up resistors. Product also features auto-flow control and 16C2850 UART chip...

Read More »
PCI Card suits development and simulation applications.
Electronic Boards

PCI Card suits development and simulation applications.

PCI-compatible PCI-Altera-485 includes PLX9054 and Xilinx for initial loading of Altera, and DMA transfer of data into and out of FIFOs. Altera controls 40 programmable RS-485/LVDS transceivers and 12 TTL IO. Each RS-485 channel is programmable for direction, termination, and function. Eight Cypress 22393 PLLs support Altera providing ability to synthesize multiple reference rates. PLX 9054...

Read More »

All Topics