PC/104-Plus Module has Ethernet and digital I/O.
Mercury PC/104-Plus module integrates Ethernet connectivity with digital I/O, eliminating need for additional board in embedded computing applications. It provides 2 PCI-based, NE2000-compatible, 10/100Mbps Ethernet ports utilizing National Semiconductor DP83815 Mac + Phy PCI controller chip. Its 24 digital I/O lines feature programmable direction in 4- and 8-bit groups. All I/O lines contain...
Read More »
Mezzanine Card adds serial communication ports.
Model M75 features 2 on-board channels, which can be configured as full-duplex RS422 or half-duplex RS485 interfaces. Capable of up to 2 Mbps in synchronous or asynchronous modes, dual channels can support SDLC protocol, and are optically isolated from each other and from system. Four asynchronous FIFO memory queues, each with depth of 2 Kb in each direction, support simultaneous reading and...
Read More »
Serial Interface Boards deliver baud rates to 1 Mb/s.
Series NI 843x RS-232/485 serial interfaces provide flexible baud rate capabilities, allowing engineers to communicate with devices that operate with non-standard baud rates ranging from 57 b/s to 1 Mb/s. Driver software offers universal PCI support for 3.3 and 5 V I/O, as well as DMA access. Combined with LabVIEW 7.1 I/O Assistant, boards are suited for serial applications such as machine...
Read More »
Mezzanine Card adds multimedia functionality to PCs.
Sirena/PMC module features 128-bit Borealis graphics processor and supports 2D, 3D, OpenGL, and DirectX-compatible displays in Solaris, Linux, Windows, LynxOS, and VxWorks environments. Accelerator supports screen resolutions up to 1,920 x 1,200. Four-channel USB 2.0 host controller supports data rates in excess of 400 Mbit/s. Video input is provided via on-board Conexant Bt878A quad-input...
Read More »
A Definitive Guide to Air Gaps in Magnetic Separation Equipment
This guide discusses how air gaps affect magnetic separation applications.
Read More »
I/O Boards suit real-time applications.
Series NI 651x consists of optically-isolated, digital I/O devices for applications in discrete, batch, and process automation. Each includes watchdog timers, programmable power-up states, programmable input filters, change detection, and 24 V logic levels, which offer connection to sensors and actuators and are software programmable without jumpers. Series provides NI-DAQmx driver software...
Read More »
Control Boards offer digital/analog measurement and control.
Configurable Controls 5000 Series incorporates processor, power source, and multiple input and outputs, depending on model. Front operator panel displays numbers, indicators, pushbuttons, switches, or pots. Controls feature onboard 10 A relay, 1 A solid-state relay, and external solid-state relay. Large output ports include onboard 30 A relay and 3 A solid-state relay. Other features include...
Read More »
Controller/I/O Cards feature Intel Pentium 4-M processor.
Controller card MIC-3318 is equipped with 400 MHz system bus, 512 Kb on-die L2 cache, support for DDR memory, and 2 Ultra ATA 33/66/100 high-speed IDE drives. Model MIC-3753 is a 72-bit digital I/O card for CompactPCI bus. I/O lines are divided into nine 8-bit I/O ports, allowing user to configure each port as input or output. General-purpose MIC-3780 is a multi-channel, counter/timer card for...
Read More »
PXI Card offers 4 high-speed digitizer channels.
UltraFast UX3131 3U PXI Card allows engineers and scientists to acquire all 4 channels at sampling rates to 25 MS/s for SONAR, LIDAR, and ultrasonic measurements. Card combines 12-bit resolution, 8 input ranges, programmable input offset, up to 64 MS memory, and optional high-speed digital inputs. Each channel can be programmed with 1 of 8 input ranges Ã-
Read More »
Embedded Board delivers industrial Ethernet.
Single-port serial Ethernet communication board, PS100B, brings RS232/422/485-based industrial devices under control of 10 Mbit/s Ethernet network. It incorporates selectable RS232/422/485 serial interface and transfers industrial device data up to 115 Kbit/s. Offering voltage from 9-30 V, it accommodates power requirements in industrial automation environments. Features include device management...
Read More »
PCI-Based DAQ Boards feature plug-and-play operation.
DaqBoard/1000(TM) series provides 16-bit, 200-kHz A/D converter and 16 single-ended or 8 differential analog inputs. Boards feature synchronous analog, digital, and frequency I/O as well as DMA bus mastering. On-board scan sequencer permits user to select up to 512 channel/range combinations and scans all channels contained in sequence at rates to 5 Ã-µs/channel. Up to 4 DaqBoards can be used...
Read More »
How SpinSelect Can Save You Time and Money
Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.
Read More »
